Re: [PATCH 0/8] firmware: arm_scpi: add support for legacy SCPI protocol

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Nov 08, 2016 at 04:08:38PM +0000, Sudeep Holla wrote:
> I will focus on this and see what's happening. I have issue with network
> on my setup with debug build and Linaro guys are not seeing it. I revert
> to release build of UEFI for that. Anyways one suggestion I have right
> now is to erase the second partition of NOR flash where the old UEFI
> config is placed and it could be conflicting with the new UEFI image.
> 
> Cmd> flash
> 
> 
> Switching on main power...
> PMIC RAM configuration (pms_v105.bin)...
> IOFPGA config: PASSED
> Enabling usb remote...
> 
> 
> Flash> ERASERANGE 0x0BFC0000 0x0BFF0000
> 
> I will looking into that further.

Still behaves the same, stopping at:

FV2 Hob           0xFE07B000 - 0xFE8253BF


-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux