This series implements gadget-side descriptor DMA for the DWC_hsotg controller. It also includes support for DWC USB IOT controllers which use the descriptor DMA mode of operation exclusively. These are two new device-only USB controller IPs based on DWC_hsotg. Tested on HAPS platform with: * HSOTG IP version 3.30a * FS/LS IOT IP version 1.00a * HS IOT IP version 1.00a This series should be applied on top of: http://marc.info/?l=linux-usb&m=147822095118860&w=2 Regards, John John Youn (2): usb: dwc2: Deprecate g-use-dma binding usb: dwc2: Enable gadget DDMA by default for HAPS Vahram Aharonyan (25): usb: dwc2: Update DMA descriptor structure usb: dwc2: gadget: Add descriptor DMA binding usb: dwc2: gadget: Add DMA descriptor status quadlet fields usb: dwc2: gadget: Enable BNA interrupt in descriptor DMA mode usb: dwc2: gadget: Add DMA descriptor chains for EP 0 usb: dwc2: host: Rename MAX_DMA_DESC_SIZE to HOST_DMA_NBYTES_LIMIT usb: dwc2: gadget: Transfer length limit checking for DDMA usb: dwc2: gadget: Add DDMA chain pointers to dwc2_hsotg_ep structure usb: dwc2: gadget: Add DDMA chain fill and parse functions usb: dwc2: gadget: EP 0 specific DDMA programming usb: dwc2: gadget: DDMA transfer start and complete usb: dwc2: gadget: Fixes for StsPhseRcvd interrupt usb: dwc2: gadget: Start DDMA IN status phase in StsPhseRcvd handler usb: dwc2: gadget: Enable descriptor DMA mode usb: dwc2: gadget: Add DDMA isoc related fields to dwc2_hsotg_ep usb: dwc2: gadget: Fill isoc descriptor and start transfer in DDMA usb: dwc2: gadget: Add completions for DDMA isoc transfers usb: dwc2: gadget: In DDMA keep incompISOOUT and incompISOIN masked usb: dwc2: gadget: Add start and complete calls for DDMA ISOC usb: dwc2: gadget: Adjust ISOC OUT request's actual len for DDMA usb: dwc2: gadget: Adjustments in debug prints usb: dwc2: gadget: For DDMA parse setup only after SetUp interrupt usb: dwc2: gadget: Correct dwc2_hsotg_ep_stop_xfr() function usb: dwc2: gadget: Disable enabled HW endpoint in dwc2_hsotg_ep_disable usb: dwc2: Add support of dedicated full-speed PHY interface Vardan Mikayelyan (3): usb: dwc2: gadget: Add IOT device IDs, configure core accordingly usb: dwc2: gadget: Program ep0_mps for LS usb: dwc2: gadget: Add new core parameter for low speed Documentation/devicetree/bindings/usb/dwc2.txt | 6 +- arch/arm/boot/dts/rk3036.dtsi | 2 +- arch/arm/boot/dts/rk3288.dtsi | 2 +- arch/arm/boot/dts/rk3xxx.dtsi | 2 +- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3368.dtsi | 2 +- drivers/usb/dwc2/core.h | 48 ++ drivers/usb/dwc2/gadget.c | 978 ++++++++++++++++++++++--- drivers/usb/dwc2/hcd.c | 12 +- drivers/usb/dwc2/hcd.h | 2 +- drivers/usb/dwc2/hcd_ddma.c | 52 +- drivers/usb/dwc2/hw.h | 48 +- drivers/usb/dwc2/params.c | 42 +- drivers/usb/dwc2/pci.c | 3 +- 14 files changed, 1039 insertions(+), 162 deletions(-) -- 2.10.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
