Hi, On lun., oct. 31 2016, Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx> wrote: > Hello, > > This the second version of the series adding support for the SDHCI > Xenon controller. It can be currently found on the Armada 37xx and the > Armada 7K/8K but will be also used in more Marvell SoC (and not only > the mvebu ones actually). > > Some of the remarks had been taking into account since the first > version, according to Ziji Hu, here are the following chcanges: > "Changes in V2: > rebase on v4.9-rc2. > Re-write Xenon bindings. Ajust Xenon DT property naming. > Add a new DT property to indicate eMMC card type, instead of using > variable card_candidate. > Clear quirks SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 in Xenon platform data > Add support to HS400 retuning." > > I think the main open point which remains is about issuing commands > from the ->set_ios() callback (in patch 7). > Ulf, could you comment about it? A few comments: - I forgot to add the v2 prefix on the series I hope it won't be too annoying, if needed I can re-post the series with the correct title. - I also forgot to add my Reviewed-by flag on the 7 first patches, I will add them back on the v3. - For the ones who want to get the series using git here is the place you can get it here: repository: git@xxxxxxxxxx:MISL-EBU-System-SW/mainline-public.git branch: sdhci-xenon-v2 Thanks, Gregory > > Thanks, > > Gregory > > Gregory CLEMENT (3): > arm64: dts: marvell: add eMMC support for Armada 37xx > arm64: dts: marvell: add sdhci support for Armada 7K/8K > arm64: configs: enable SDHCI driver for Xenon > > Ziji Hu (7): > mmc: sdhci: Export sdhci_set_ios() from sdhci.c > mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c > mmc: sdhci: Export sdhci_execute_tuning() in sdhci.c > MAINTAINERS: add entry for Marvell Xenon MMC Host Controller drivers > dt: bindings: Add bindings for Marvell Xenon SD Host Controller > mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality > mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC > > Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt | 161 +- > MAINTAINERS | 7 +- > arch/arm64/boot/dts/marvell/armada-3720-db.dts | 8 +- > arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 11 +- > arch/arm64/boot/dts/marvell/armada-7040-db.dts | 8 +- > arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 9 +- > arch/arm64/configs/defconfig | 1 +- > drivers/mmc/host/Kconfig | 9 +- > drivers/mmc/host/Makefile | 3 +- > drivers/mmc/host/sdhci-xenon-phy.c | 1181 +++++++- > drivers/mmc/host/sdhci-xenon-phy.h | 157 +- > drivers/mmc/host/sdhci-xenon.c | 598 ++++- > drivers/mmc/host/sdhci-xenon.h | 159 +- > drivers/mmc/host/sdhci.c | 11 +- > drivers/mmc/host/sdhci.h | 4 +- > 15 files changed, 2323 insertions(+), 4 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt > create mode 100644 drivers/mmc/host/sdhci-xenon-phy.c > create mode 100644 drivers/mmc/host/sdhci-xenon-phy.h > create mode 100644 drivers/mmc/host/sdhci-xenon.c > create mode 100644 drivers/mmc/host/sdhci-xenon.h > > base-commit: 9fe68cad6e74967b88d0c6aeca7d9cd6b6e91942 > -- > git-series 0.8.10 -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
