On 10/31/2016 04:02 AM, Rob Herring wrote:
On Tue, Oct 25, 2016 at 06:25:13PM +0200, Fabrice Gasnier wrote:
This patch adds documentation of device tree bindings for the STM32 ADC.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
---
.../devicetree/bindings/iio/adc/st,stm32-adc.txt | 78 ++++++++++++++++++++++
1 file changed, 78 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
new file mode 100644
index 0000000..a9a8b3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
@@ -0,0 +1,78 @@
+STMicroelectronics STM32 ADC device driver
+
+STM32 ADC is a successive approximation analog-to-digital converter.
+It has several multiplexed input channels. Conversions can be performed
+in single, continuous, scan or discontinuous mode. Result of the ADC is
+stored in a left-aligned or right-aligned 32-bit data register.
+Conversions can be launched in software or using hardware triggers.
+
+The analog watchdog feature allows the application to detect if the input
+voltage goes beyond the user-defined, higher or lower thresholds.
+
+Each STM32 ADC block can have up to 3 ADC instances.
+
+Each instance supports two contexts to manage conversions, each one has its
+own configurable sequence and trigger:
+- regular conversion can be done in sequence, running in background
+- injected conversions have higher priority, and so have the ability to
+ interrupt regular conversion sequence (either triggered in SW or HW).
+ Regular sequence is resumed, in case it has been interrupted.
+
+Required properties:
+- compatible: Should be "st,stm32f4-adc".
+- reg: Offset and length of the ADC block register set.
+- interrupts: Must contain the interrupt for ADC.
+- clocks: Clock for the analog circuitry (common to all ADCs).
+- clock-names: Must be "adc".
+- vref-supply: Phandle to the vref input analog reference voltage.
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- A pinctrl state named "default" for each ADC channel may be defined to set
+ inX ADC pins in mode of operation for analog input on external pin.
+- gpios: Array of gpios that may be configured as EXTi trigger sources.
+
+Example:
This should be last.
Hi Rob,
I'll fix this.
+ adc: adc@40012000 {
+ compatible = "st,stm32f4-adc";
+ reg = <0x40012000 0x400>;
+ interrupts = <18>;
+ clocks = <&rcc 0 168>;
+ clock-names = "adc";
+ vref-supply = <®_vref>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&adc3_in8_pin>;
+ gpios = <&gpioa 11 0>,
+ <&gpioa 15 0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc1: adc1-master@0 {
adc@0 sufficient?
Yes, if you agree, I'd go for adc1@0, adc2@100, adc3@200, to reflect reg
property for child node.
Is it ok from your point of view ?
+ #io-channel-cells = <1>;
+ reg = <0x0>;
+ clocks = <&rcc 0 168>;
+ st,adc-channels = <8>;
+ };
+ ...
+ other adc child nodes follow...
+ };
+
+Contents of a stm32 adc child node:
+-----------------------------------
+An ADC block node should contain at least one subnode, representing an
+ADC instance available on the machine.
+
+Required properties:
+- reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
+- st,adc-channels: List of single-ended channels muxed for this ADC.
How many? What are valid values?
stm32f4 can have up to 19 channels, numbered from 0 to 18 to match with
reference manual.
I'll add this.
+- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in
+ Documentation/devicetree/bindings/iio/iio-bindings.txt
+
+Optional properties:
+- clocks: Input clock private to this ADC instance.
+- st,injected: Use injected conversion sequence on an ADC, rather than regular.
Not sure about this one. Seems like this would either be a user choice
or depend on what's connected to the ADC.
It's related to ADC sequencer, and the way it's being configured/used
(see above paragraph on regular/injected).
This is not related to what's connected to adc inputs.
As suggested by Jonathan, I think I'll drop injected support for now, to
simplify the driver and review.
Thanks,
Best Regards,
Fabrice
+- dmas: Phandle to dma channel for this ADC instance, only for regular
+ conversions. See ../../dma/dma.txt for details.
+- dma-names: Must be "rx" when dmas property is being used.
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
