Hi Andi,
Only DT bindings of LED class drivers should be placed in
Documentation/devicetree/bindings/leds. Please move it to the
media bindings.
Thanks,
Jacek Anaszewski
On 11/02/2016 11:40 AM, Andi Shyti wrote:
Document the ir-spi driver's binding which is a IR led driven
through the SPI line.
Signed-off-by: Andi Shyti <andi.shyti@xxxxxxxxxxx>
---
.../devicetree/bindings/leds/spi-ir-led.txt | 29 ++++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/spi-ir-led.txt
diff --git a/Documentation/devicetree/bindings/leds/spi-ir-led.txt b/Documentation/devicetree/bindings/leds/spi-ir-led.txt
new file mode 100644
index 0000000..896b699
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/spi-ir-led.txt
@@ -0,0 +1,29 @@
+Device tree bindings for IR LED connected through SPI bus which is used as
+remote controller.
+
+The IR LED switch is connected to the MOSI line of the SPI device and the data
+are delivered thourgh that.
+
+Required properties:
+ - compatible: should be "ir-spi-led".
+
+Optional properties:
+ - duty-cycle: 8 bit balue that represents the percentage of one period
+ in which the signal is active. It can be 50, 60, 70, 75, 80 or 90.
+ - led-active-low: boolean value that specifies whether the output is
+ negated with a NOT gate.
+ - power-supply: specifies the power source. It can either be a regulator
+ or a gpio which enables a regulator, i.e. a regulator-fixed as
+ described in
+ Documentation/devicetree/bindings/regulator/fixed-regulator.txt
+
+Example:
+
+ irled@0 {
+ compatible = "ir-spi-led";
+ reg = <0x0>;
+ spi-max-frequency = <5000000>;
+ power-supply = <&vdd_led>;
+ led-active-low;
+ duty-cycle = /bits/ 8 <60>;
+ };
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
