Add otg-port nodes for both u2phy0 and u2phy1. The otg-port can be used for USB2.0 part of USB3.0 OTG controller. Signed-off-by: William Wu <wulf@xxxxxxxxxxxxxx> --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index b65c193..ea2df51 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1095,6 +1095,17 @@ clock-output-names = "clk_usbphy0_480m"; status = "disabled"; + u2phy0_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + status = "disabled"; + }; + + u2phy0_host: host-port { #phy-cells = <0>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>; @@ -1112,6 +1123,16 @@ clock-output-names = "clk_usbphy1_480m"; status = "disabled"; + u2phy1_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + status = "disabled"; + }; + u2phy1_host: host-port { #phy-cells = <0>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>; -- 2.0.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html