On 11/01, Peter Chen wrote:
> clks[IMX6UL_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
> clks[IMX6UL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
> - clks[IMX6UL_CLK_SIM1] = imx_clk_gate2("sim1", "sim_sel", base + 0x80, 6);
> - clks[IMX6UL_CLK_SIM2] = imx_clk_gate2("sim2", "sim_sel", base + 0x80, 8);
> + if (clk_on_imx6ul()) {
> + clks[IMX6UL_CLK_SIM1] = imx_clk_gate2("sim1", "sim_sel", base + 0x80, 6);
> + clks[IMX6UL_CLK_SIM2] = imx_clk_gate2("sim2", "sim_sel", base + 0x80, 8);
> + }
> clks[IMX6UL_CLK_EIM] = imx_clk_gate2("eim", "eim_slow_podf", base + 0x80, 10);
> clks[IMX6UL_CLK_PWM8] = imx_clk_gate2("pwm8", "perclk", base + 0x80, 16);
> clks[IMX6UL_CLK_UART8_IPG] = imx_clk_gate2("uart8_ipg", "ipg", base + 0x80, 14);
> @@ -430,6 +478,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
> clk_set_rate(clks[IMX6UL_CLK_ENET_REF], 50000000);
> clk_set_rate(clks[IMX6UL_CLK_ENET2_REF], 50000000);
> clk_set_rate(clks[IMX6UL_CLK_CSI], 24000000);
> + clk_set_rate(clks[IMX6UL_CLK_PLL3_PFD2], 320000000);
Can you use assigned clock rates for this instead?
>
> /* keep all the clks on just for bringup */
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
