> > > + if (of_property_read_bool(np, "brcm,enet-phy-lane-swap")) { > > > + /* Lane Swap - Undocumented register...magic! */ > > > + ret = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_SEL_ER + 0x9, > > > + 0x11B); > > > + if (ret < 0) > > > + return ret; > > > + } > > > + > > > > I wounder if this property could be made generic? What exactly are you > > swapping? Rx and Tx lanes? Maybe we should add it to phy.txt? > > Are you envisioning adding a DT check (similar to the > of_property_read_bool above, only with a more generic string) in > phy_device_create(), which will then set a PHY device flag? This flag > would then be checked for in the PHY driver and the appropriate action > taken (in this case the bcm_phy_write_exp above). I would keep the parsing of the property in the driver. But if we think other PHYs could also support this feature, it would be good to avoid having "brcm,enet-phy-lane-swap", "marvell,enet-phy-lane-swap", "davicom,enet-phy-lane-swap", etc. It would be better to have one well defined property documented in phy.txt which any PHY is free to implement. Andrew -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html