The Amlogic Meson GXL SoCs have an internal RMII PHY that is muxed with the external RGMII pins. In order to support switching between the two PHYs links, extended registers size for mdio-mux-mmioreg must be added. Finally, the internal PHY is added in the GXL dtsi and support for each board is added in intermediate board family dtsi or final dts. This patchset depends on ARM64 dts patch at [1] Changes since original RFC patchset at : [2] - Remove meson8b experimental phy switching - Switch to mdio-mux-mmioreg with extennded size support - Add internal phy support for S905x and p231 - Add external PHY support for p230 [1] http://lkml.kernel.org/r/1477932286-27482-1-git-send-email-narmstrong@xxxxxxxxxxxx [2] http://lkml.kernel.org/r/1477060838-14164-1-git-send-email-narmstrong@xxxxxxxxxxxx Neil Armstrong (5): net: mdio-mux-mmioreg: Add support for 16bit and 32bit register sizes net: phy: Add Meson GXL Internal PHY driver ARM64: dts: meson-gxl: Add ethernet nodes with internal PHY ARM64: dts: meson-gxl-p23x: Enable ethernet ARM64: dts: meson-gxl-s905x: Enable internal ethernet PHY .../devicetree/bindings/net/mdio-mux-mmioreg.txt | 4 +- .../boot/dts/amlogic/meson-gxl-s905d-p230.dts | 16 +++++ .../boot/dts/amlogic/meson-gxl-s905d-p231.dts | 6 ++ .../boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi | 4 ++ arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi | 6 ++ arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 45 ++++++++++++ drivers/net/phy/Kconfig | 5 ++ drivers/net/phy/Makefile | 1 + drivers/net/phy/mdio-mux-mmioreg.c | 60 ++++++++++++---- drivers/net/phy/meson-gxl.c | 81 ++++++++++++++++++++++ 10 files changed, 213 insertions(+), 15 deletions(-) create mode 100644 drivers/net/phy/meson-gxl.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html