Re: [PATCH v9 2/4] soc: mediatek: Init MT8173 scpsys driver earlier

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi James,

On 10/20/2016 10:56 AM, James Liao wrote:
Some power domain comsumers may init before module_init.
So the power domain provider (scpsys) need to be initialized
earlier too.

Take an example for our IOMMU (M4U) and SMI. SMI is a bridge
between IOMMU and multimedia HW. SMI is responsible to
enable/disable iommu and help transfer data for each multimedia
HW. Both of them have to wait until the power and clocks are
enabled.

So scpsys driver should be initialized before SMI, and SMI should
be initialized before IOMMU, and then init IOMMU consumers
(display/vdec/venc/camera etc.).

IOMMU is subsys_init by default. So we need to init scpsys driver
before subsys_init.

Signed-off-by: James Liao <jamesjj.liao@xxxxxxxxxxxx>
Reviewed-by: Kevin Hilman <khilman@xxxxxxxxxxxx>
---

I didn't applied this patch for now.
I answered you in v7 of this series [1]. I would prefer to see if we can fix that otherwise.

Would be great if you or Yong could provide some feedback.

Thanks,
Matthias

[1] https://patchwork.kernel.org/patch/9397405/

 drivers/soc/mediatek/mtk-scpsys.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index fa9ee69..dd7a07d 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -613,4 +613,21 @@ static int scpsys_probe(struct platform_device *pdev)
 		.of_match_table = of_match_ptr(of_scpsys_match_tbl),
 	},
 };
-builtin_platform_driver(scpsys_drv);
+
+static int __init scpsys_drv_init(void)
+{
+	return platform_driver_register(&scpsys_drv);
+}
+
+/*
+ * There are some Mediatek drivers which depend on the power domain driver need
+ * to probe in earlier initcall levels. So scpsys driver also need to probe
+ * earlier.
+ *
+ * IOMMU(M4U) and SMI drivers for example. SMI is a bridge between IOMMU and
+ * multimedia HW. IOMMU depends on SMI, and SMI is a power domain consumer,
+ * so the proper probe sequence should be scpsys -> SMI -> IOMMU driver.
+ * IOMMU drivers are initialized during subsys_init by default, so we need to
+ * move SMI and scpsys drivers to subsys_init or earlier init levels.
+ */
+subsys_initcall(scpsys_drv_init);

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux