On Thu, Oct 27, 2016 at 1:32 AM, Michael Scott <michael.scott@xxxxxxxxxx> wrote: > Initial pinctrl driver for QCOM msm8994 platforms. > > In order to continue the initial board support for QCOM msm8994/msm8992 > presented in patches from Jeremy McNicoll <jeremymc@xxxxxxxxxx>, let's put > a proper pinctrl driver in place. > > Currently, the DT for these platforms uses the msm8x74 pinctrl driver to enable > basic UART. Beyond the first few pins the rest are different enough to justify > it's own driver. > > Note: This driver is also be used by QCOM's msm8992 platform as it's TLM block > is the same. > > - Initial formatting and style was taken from the msm8x74 pinctrl driver added > by Björn Andersson <bjorn.andersson@xxxxxxxxxx> > - Data was then adjusted per QCOM MSM8994 documentation for Top Level Multiplexing > - Bindings documentation was based on qcom,msm8996-pinctrl.txt by > Joonwoo Park <joonwoop@xxxxxxxxxxxxxx> and then modified for msm8994 content > > Signed-off-by: Michael Scott <michael.scott@xxxxxxxxxx> > --- > > V1 -> V2: fixed missing FUNCTION(nav_pps) and removed 3 odd newlines between blsp_i2c4_groups and cci_timer0_groups Looks fine to me, just like the other Qcom drivers. I just want Björn Andersson's ACK before merging, Björn? Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
