Hi Tim, On Fri, Oct 28, 2016 at 1:23 PM, Tim Harvey <tharvey@xxxxxxxxxxxxx> wrote: > Greetings, > > I have an IMX6 board that has the following: > sdhc1: mmc0: sdio radio > sdhc2: mmc1: /dev/mmcblk1: microSD connector > sdhc3: mmc2: /dev/mmcblk2: on-board eMMC > > I would like to have sdhc3 registered as /dev/mmcblk0 and sdhc2 > registered as /dev/mmcblk1 so that permanent storage is the first > mmcblk device as I think this is more intuitive however currently > these get instanced in the order they appear in the imx6qdl.dtsi > device-tree configuration and are not able to be mapped the way I want > them in my dts file. > > Is there a way, or if not is there a desire for a way, to specify the > order of /dev/mmcblk devices via device-tree? You could use UUID to specify the rootfs location on your board. Please check: http://git.denx.de/?p=u-boot.git;a=commit;h=ca4f338e2efece5196eb2178e5f7d07be828da6e -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
