taos_i2c_read() and taos_als_calibrate() does not check to see if the value returned by i2c_smbus_read_byte() was an error code. This patch adds the appropriate error handling. Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx> --- drivers/staging/iio/light/tsl2583.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c index fd4b6ef..35c1696 100644 --- a/drivers/staging/iio/light/tsl2583.c +++ b/drivers/staging/iio/light/tsl2583.c @@ -171,7 +171,14 @@ taos_i2c_read(struct i2c_client *client, u8 reg, u8 *val, unsigned int len) return ret; } /* read the data */ - *val = i2c_smbus_read_byte(client); + ret = i2c_smbus_read_byte(client); + if (ret < 0) { + dev_err(&client->dev, + "%s failed to read byte after writing to register %x\n", + __func__, reg); + return ret; + } + *val = ret; val++; reg++; } @@ -355,6 +362,13 @@ static int taos_als_calibrate(struct iio_dev *indio_dev) } reg_val = i2c_smbus_read_byte(chip->client); + if (reg_val < 0) { + dev_err(&chip->client->dev, + "%s failed to read after writing to the CNTRL register\n", + __func__); + return ret; + } + if ((reg_val & (TSL258X_CNTL_ADC_ENBL | TSL258X_CNTL_PWR_ON)) != (TSL258X_CNTL_ADC_ENBL | TSL258X_CNTL_PWR_ON)) { dev_err(&chip->client->dev, @@ -371,6 +385,12 @@ static int taos_als_calibrate(struct iio_dev *indio_dev) return ret; } reg_val = i2c_smbus_read_byte(chip->client); + if (reg_val < 0) { + dev_err(&chip->client->dev, + "%s failed to read after writing to the STATUS register\n", + __func__); + return ret; + } if ((reg_val & TSL258X_STA_ADC_VALID) != TSL258X_STA_ADC_VALID) { dev_err(&chip->client->dev, -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html