Hi, This series is v3 of the series to introduce the ti-cpufreq driver which parses SoC data and provides opp-supported-hw data to the OPP core in order to enable the proper OPPs for the silicon in use. v2 of this series can be found here [1]. Several changes to the dt-binding and ti-cpufreq driver are present in v3, which are described in detail under scissors line in patches but mostly focused on moving properties that were added in cpu node previously to the operating-points node and updating driver to reflect these changes, along with using a common compatible for all ti platforms. Also, a new patch was added to expose an internal OPP core API to allow a common way to get a reference to the OPP table from a platform driver. I have just sent the driver and binding here but have held off on the updated DT nodes, I will send these out once we can agree on the binding and driver changes but have pushed them if anyone is curious here [2]. Regards, Dave [1] http://www.spinics.net/lists/linux-omap/msg131601.html [2] https://github.com/dgerlach/linux-pm/tree/upstream/v4.9/ti-cpufreq-driver-v3 Dave Gerlach (3): PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp API Documentation: dt: add bindings for ti-cpufreq cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime .../devicetree/bindings/cpufreq/ti-cpufreq.txt | 132 ++++++++++ drivers/base/power/opp/of.c | 8 +- drivers/base/power/opp/opp.h | 1 - drivers/cpufreq/Kconfig.arm | 11 + drivers/cpufreq/Makefile | 1 + drivers/cpufreq/ti-cpufreq.c | 288 +++++++++++++++++++++ include/linux/pm_opp.h | 6 + 7 files changed, 442 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt create mode 100644 drivers/cpufreq/ti-cpufreq.c -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
