Using the PWM_POLARITY_INVERTED macro instead of the hardcoded number
0 makes the DTS easier to read.
Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/exynos4412-odroidu3.dts | 3 ++-
arch/arm/boot/dts/exynos4412-trats2.dts | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index 99634c54dca9..480a80624b77 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -12,6 +12,7 @@
*/
/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
#include "exynos4412-odroid-common.dtsi"
/ {
@@ -35,7 +36,7 @@
fan0: pwm-fan {
compatible = "pwm-fan";
- pwms = <&pwm 0 10000 0>;
+ pwms = <&pwm 0 10000 PWM_POLARITY_INVERTED>;
cooling-min-state = <0>;
cooling-max-state = <3>;
#cooling-cells = <2>;
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 41ecd6d465a7..63ad30507d4f 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -18,6 +18,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "Samsung Trats 2 based on Exynos4412";
@@ -164,7 +165,7 @@
max77693_haptic {
compatible = "maxim,max77693-haptic";
haptic-supply = <&ldo26_reg>;
- pwms = <&pwm 0 38022 0>;
+ pwms = <&pwm 0 38022 PWM_POLARITY_INVERTED>;
};
charger {
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
