On Thu, 2016-10-27 at 10:32 +0100, Mark Rutland wrote: > On Wed, Oct 26, 2016 at 04:42:35PM -0500, Rob Herring wrote: > > > > On Wed, Oct 19, 2016 at 05:21:13PM +0200, Jerome Brunet wrote: > > > > > > > > > This commit adds the device tree bindings description for > > > Amlogic's GPIO > > > interrupt controller available on the meson8, meson8b and gxbb > > > SoC families > > > > > > Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx> > > > --- > > > Rob, I did not include the Ack you gave for the RFC as bindings > > > have slightly > > > changed. Only the interrupt property has be removed following a > > > discussion I > > > had with Marc > > > > As Mark R already said, you should keep the interrupts property. > > To be clear, the interrupt routing should be described *somehow*, > though > I don't think the generic interrupts property is correct, as this is > an > interrupt *router*, i.e. this device doesn't own the interrupt, it > just > joins two parts of the line together (and so flags are meaningless). > > Thanks, > Mark. Indeed Mark, I already rewritten the driver taking Marc's comment into account. There will be 2 properties added to the DT: - meson,upstream-interrupts : an array with the 8 gic interrupt used as output of the controller - meson,num-input-mux : the number of inputs (pads) available to the muxes I'm looking for solution to the "create mapping" issue we have in pinctrl (patch 4) before posting a v3. If you think these properties should be different, feel free to tell me now. Thx Jerome -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
