Logic to convert adc code to voltage is generic across all channels.
Different scaling can be done on the obtained voltage to report in physical
units. Implement separate function for generic conversion logic.
Scaling functionality can be changed per channel. Update changes to support
reporting of Raw adc code.
Signed-off-by: Rama Krishna Phani A <rphani@xxxxxxxxxxxxxx>
---
drivers/iio/adc/qcom-spmi-vadc.c | 54 +++++++++++++++++++++-------------------
1 file changed, 28 insertions(+), 26 deletions(-)
diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
index c2babe5..ff4d549 100644
--- a/drivers/iio/adc/qcom-spmi-vadc.c
+++ b/drivers/iio/adc/qcom-spmi-vadc.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2012-2016, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -84,7 +84,7 @@
#define VADC_MAX_ADC_CODE 0xa800
#define VADC_ABSOLUTE_RANGE_UV 625000
-#define VADC_RATIOMETRIC_RANGE_UV 1800000
+#define VADC_RATIOMETRIC_RANGE 1800
#define VADC_DEF_PRESCALING 0 /* 1:1 */
#define VADC_DEF_DECIMATION 0 /* 512 */
@@ -418,7 +418,7 @@ static int vadc_measure_ref_points(struct vadc_priv *vadc)
u16 read_1, read_2;
int ret;
- vadc->graph[VADC_CALIB_RATIOMETRIC].dx = VADC_RATIOMETRIC_RANGE_UV;
+ vadc->graph[VADC_CALIB_RATIOMETRIC].dx = VADC_RATIOMETRIC_RANGE;
vadc->graph[VADC_CALIB_ABSOLUTE].dx = VADC_ABSOLUTE_RANGE_UV;
prop = vadc_get_channel(vadc, VADC_REF_1250MV);
@@ -468,21 +468,30 @@ static int vadc_measure_ref_points(struct vadc_priv *vadc)
return ret;
}
-static s32 vadc_calibrate(struct vadc_priv *vadc,
- const struct vadc_channel_prop *prop, u16 adc_code)
+static void vadc_scale_calib(struct vadc_priv *vadc, u16 adc_code,
+ const struct vadc_channel_prop *prop,
+ s64 *scale_voltage)
{
- const struct vadc_prescale_ratio *prescale;
- s64 voltage;
+ *scale_voltage = (adc_code -
+ vadc->graph[prop->calibration].gnd);
+ *scale_voltage *= vadc->graph[prop->calibration].dx;
+ *scale_voltage = div64_s64(*scale_voltage,
+ vadc->graph[prop->calibration].dy);
+ if (prop->calibration == VADC_CALIB_ABSOLUTE)
+ *scale_voltage +=
+ vadc->graph[prop->calibration].dx;
- voltage = adc_code - vadc->graph[prop->calibration].gnd;
- voltage *= vadc->graph[prop->calibration].dx;
- voltage = div64_s64(voltage, vadc->graph[prop->calibration].dy);
+ if (*scale_voltage < 0)
+ *scale_voltage = 0;
+}
- if (prop->calibration == VADC_CALIB_ABSOLUTE)
- voltage += vadc->graph[prop->calibration].dx;
+static s64 vadc_scale_fn(struct vadc_priv *vadc,
+ const struct vadc_channel_prop *prop, u16 adc_code)
+{
+ const struct vadc_prescale_ratio *prescale;
+ s64 voltage = 0;
- if (voltage < 0)
- voltage = 0;
+ vadc_scale_calib(vadc, adc_code, prop, &voltage);
prescale = &vadc_prescale_ratios[prop->prescale];
@@ -552,11 +561,8 @@ static int vadc_read_raw(struct iio_dev *indio_dev,
if (ret)
break;
- *val = vadc_calibrate(vadc, prop, adc_code);
+ *val = vadc_scale_fn(vadc, prop, adc_code);
- /* 2mV/K, return milli Celsius */
- *val /= 2;
- *val -= KELVINMIL_CELSIUSMIL;
return IIO_VAL_INT;
case IIO_CHAN_INFO_RAW:
prop = &vadc->chan_props[chan->address];
@@ -564,12 +570,8 @@ static int vadc_read_raw(struct iio_dev *indio_dev,
if (ret)
break;
- *val = vadc_calibrate(vadc, prop, adc_code);
+ *val = (int)adc_code;
return IIO_VAL_INT;
- case IIO_CHAN_INFO_SCALE:
- *val = 0;
- *val2 = 1000;
- return IIO_VAL_INT_PLUS_MICRO;
default:
ret = -EINVAL;
break;
@@ -616,8 +618,8 @@ struct vadc_channels {
VADC_CHAN(_dname, IIO_TEMP, BIT(IIO_CHAN_INFO_PROCESSED), _pre) \
#define VADC_CHAN_VOLT(_dname, _pre) \
- VADC_CHAN(_dname, IIO_VOLTAGE, \
- BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), \
+ VADC_CHAN(_dname, IIO_VOLTAGE, \
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_PROCESSED),\
_pre) \
/*
@@ -850,9 +852,9 @@ static int vadc_get_dt_data(struct vadc_priv *vadc, struct device_node *node)
iio_chan->channel = prop.channel;
iio_chan->datasheet_name = vadc_chan->datasheet_name;
+ iio_chan->extend_name = child->name;
iio_chan->info_mask_separate = vadc_chan->info_mask;
iio_chan->type = vadc_chan->type;
- iio_chan->indexed = 1;
iio_chan->address = index++;
iio_chan++;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
