Re: [PATCH v4 4/5] mm: make processing of movable_node arch-specific

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 26/10/16 02:55, Reza Arbab wrote:
> On Tue, Oct 25, 2016 at 11:15:40PM +1100, Balbir Singh wrote:
>> After the ack, I realized there were some more checks needed, IOW
>> questions for you :)
> 
> Hey! No takebacks!
> 

I still believe we need your changes, I was wondering if we've tested
it against normal memory nodes and checked if any memblock
allocations end up there. Michael showed me some memblock
allocations on node 1 of a two node machine with movable_node
I'll double check at my end. See my question below


> The short answer is that neither of these is a concern.
> 
> Longer; if you use "movable_node", x86 can identify these nodes at boot. They call memblock_mark_hotplug() while parsing the SRAT. Then, when the zones are initialized, those markings are used to determine ZONE_MOVABLE.
> 
> We have no analog of this SRAT information, so our movable nodes can only be created post boot, by hotplugging and explicitly onlining with online_movable.
>

Is this true for all of system memory as well or only for nodes
hotplugged later?

Balbir Singh.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux