Re: [PATCH] ARM: DT: stm32: move dma translation to board files

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Alexandre,

>
> stm32f469-disco and stm32f429-eval boards use SDRAM start address remapping
> (to @0) to boost performances. A DMA translation through "dma-ranges"
> property was needed for other masters than the M4 CPU.
> stm32f429-disco doesn't use remapping so doesn't need this DMA translation.
> This patches moves this DMA translation definition from stm32f429 soc file
> to board files.
>
> Signed-off-by: Alexandre TORGUE <alexandre.torgue@xxxxxx>
>
> diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
> index 13c7cd2..a763c15 100644
> --- a/arch/arm/boot/dts/stm32429i-eval.dts
> +++ b/arch/arm/boot/dts/stm32429i-eval.dts
> @@ -82,6 +82,10 @@
>                 };
>         };
>
> +       soc {
> +               dma-ranges = <0xc0000000 0x0 0x10000000>;
> +       };
> +
>         usbotg_hs_phy: usbphy {
>                 #phy-cells = <0>;
>                 compatible = "usb-nop-xceiv";

Shouldn't also the peripheral dma-ranges property move to board specific too?
I  had this patch for while but I didn't had the time to submit:

Author: Bruno Herrera <bruherrera@xxxxxxxxx>
Date:   Sun Oct 16 14:50:00 2016 -0200

    ARM: DT: STM32: Use dma-ranges property per board not at dtsi file

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts
b/arch/arm/boot/dts/stm32429i-eval.dts
index 6bfc595..2a22a82 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -52,6 +52,10 @@
        model = "STMicroelectronics STM32429i-EVAL board";
        compatible = "st,stm32429i-eval", "st,stm32f429";

+       soc {
+               dma-ranges = <0xC0000000 0x0 0x10000000>;
+       };
+
        chosen {
                bootargs = "root=/dev/ram rdinit=/linuxrc";
                stdout-path = "serial0:115200n8";
@@ -96,6 +100,7 @@

 &ethernet0 {
        status = "okay";
+       dma-ranges;
        pinctrl-0       = <&ethernet0_mii>;
        pinctrl-names   = "default";
        phy-mode        = "mii-id";
@@ -116,6 +121,7 @@
 };

 &usbotg_hs {
+       dma-ranges;
        dr_mode = "host";
        phys = <&usbotg_hs_phy>;
        phy-names = "usb2-phy";
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 7d624a2..697a133 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -59,7 +59,6 @@
        };

        soc {
-               dma-ranges = <0xc0000000 0x0 0x10000000>;

                timer2: timer@40000000 {
                        compatible = "st,stm32-timer";
@@ -472,13 +471,11 @@
                        st,syscon = <&syscfg 0x4>;
                        snps,pbl = <8>;
                        snps,mixed-burst;
-                       dma-ranges;
                        status = "disabled";
                };

                usbotg_hs: usb@40040000 {
                        compatible = "snps,dwc2";
-                       dma-ranges;
                        reg = <0x40040000 0x40000>;
                        interrupts = <77>;
                        clocks = <&rcc 0 29>;


> diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
> index 0596d60..3a1cfdd 100644
> --- a/arch/arm/boot/dts/stm32f429.dtsi
> +++ b/arch/arm/boot/dts/stm32f429.dtsi
> @@ -59,8 +59,6 @@
>         };
>
>         soc {
> -               dma-ranges = <0xc0000000 0x0 0x10000000>;
> -
>                 timer2: timer@40000000 {
>                         compatible = "st,stm32-timer";
>                         reg = <0x40000000 0x400>;
> diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
> index 9e73656..c2213c0 100644
> --- a/arch/arm/boot/dts/stm32f469-disco.dts
> +++ b/arch/arm/boot/dts/stm32f469-disco.dts
> @@ -64,6 +64,10 @@
>         aliases {
>                 serial0 = &usart3;
>         };
> +
> +       soc {
> +               dma-ranges = <0xc0000000 0x0 0x10000000>;
> +       };
>  };
>
>  &clk_hse {
> --


Br.,
Bruno
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux