Re: [RFC V4 PATCH 5/6] arm64: dts: msm8994 SoC and Huawei Angler (Nexus 6P) support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, Oct 21, 2016 at 11:25:33AM -0700, Bjorn Andersson wrote:
> On Fri 21 Oct 04:11 PDT 2016, Jeremy McNicoll wrote:
> 
> > From: Bastian Köcher <mail@xxxxxxx>
> > 
> > Initial device tree support for Qualcomm MSM8994 SoC and
> > Huawei Angler / Google Nexus 6P support.
> > 
> > The device tree is based on the Google 3.10 kernel tree.
> > 
> > The device can be booted into the initrd with only one CPU running.
> > 
> 
> Looks reasonable as well, same two comments as the 8992 below.
> 
> > Signed-off-by: Bastian Köcher <mail@xxxxxxx>
> > [jeremymc@xxxxxxxxxx: removed Kconfig, defconfig, move from Huawei to qcom dir]
> > Signed-off-by: Jeremy McNicoll <jeremymc@xxxxxxxxxx>
> > ---
> >  arch/arm64/boot/dts/qcom/Makefile                  |   2 +-
> >  .../arm64/boot/dts/qcom/msm8994-angler-rev-101.dts |  42 ++++
> >  arch/arm64/boot/dts/qcom/msm8994-pins.dtsi         |  38 ++++
> >  arch/arm64/boot/dts/qcom/msm8994-v2.0.dtsi         |  32 +++
> >  arch/arm64/boot/dts/qcom/msm8994.dtsi              | 236 +++++++++++++++++++++
> >  5 files changed, 349 insertions(+), 1 deletion(-)
> >  create mode 100644 arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
> >  create mode 100644 arch/arm64/boot/dts/qcom/msm8994-pins.dtsi
> >  create mode 100644 arch/arm64/boot/dts/qcom/msm8994-v2.0.dtsi
> >  create mode 100644 arch/arm64/boot/dts/qcom/msm8994.dtsi
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> > index abb366e..4040fc8 100644
> > --- a/arch/arm64/boot/dts/qcom/Makefile
> > +++ b/arch/arm64/boot/dts/qcom/Makefile
> > @@ -1,6 +1,6 @@
> >  dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb msm8916-mtp.dtb
> >  dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb apq8096-db820c.dtb
> > -dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-bullhead-rev-101.dtb
> > +dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-bullhead-rev-101.dtb msm8994-angler-rev-101.dtb
> 
> This won't scale, use multiple lines instead.
>

Done, one entry per line.

> >  
> >  always		:= $(dtb-y)
> >  subdir-y	:= $(dts-dirs)
> > diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
> > new file mode 100644
> > index 0000000..9684e6c
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
> > @@ -0,0 +1,42 @@
> > +/* Copyright (c) 2015, Huawei Inc. All rights reserved.
> > + * Copyright (c) 2016, The Linux Foundation. All rights reserved.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 and
> > + * only version 2 as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "msm8994-v2.0.dtsi"
> > +
> > +/ {
> > +	model = "HUAWEI MSM8994 ANGLER rev-1.01";
> > +	compatible = "qcom,msm8994";
> > +	/* required for bootloader to select correct board */
> > +	qcom,board-id = <8026 0>;
> > +};
> > +
> > +/ {
> 
> No need to close and reopen / {} here.
>

updated.

> > +	aliases {
> > +		serial0 = &blsp1_uart2;
> > +	};
> > +
> > +	chosen {
> > +		stdout-path = "serial0:115200n8";
> > +	};
> > +
> > +	soc {
> > +		serial@f991e000 {
> > +			status = "okay";
> > +			pinctrl-names = "default", "sleep";
> > +			pinctrl-0 = <&blsp1_uart2_default>;
> > +			pinctrl-1 = <&blsp1_uart2_sleep>;
> > +		};
> > +	};
> > +};
> [..]
> > diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
> [..]
> > +	msmgpio: pinctrl@fd510000 {
> > +		compatible = "qcom,msm8994-pinctrl", "qcom,msm8974-pinctrl";
> 
> msm8974 TLMM won't work here either, so please drop that.
> 

Dropped 8974 pinctrl now that Michael Scott has created a proper pinctrl
driver for msm8994.  There was sufficient overlap between 8974 and 8994
for initial dev work.  [https://patches.linaro.org/patch/78750/]

-jeremy

> > +		reg = <0xfd510000 0x4000>;
> > +		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> > +		gpio-controller;
> > +		#gpio-cells = <2>;
> > +		interrupt-controller;
> > +		#interrupt-cells = <2>;
> > +	};
> 
> Regards,
> Bjorn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux