On 10/21, Jeremy McNicoll wrote:
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 5dd05de..abb366e 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -1,6 +1,6 @@
> dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb msm8916-mtp.dtb
> -dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
> -dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb apq8096-db820c.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
One line per dtb please.
>
> always := $(dtb-y)
> subdir-y := $(dts-dirs)
> diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
> new file mode 100644
> index 0000000..63fa3b0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
> @@ -0,0 +1,42 @@
> +/* Copyright (c) 2015, LGE Inc. All rights reserved.
> + * Copyright (c) 2016, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +/dts-v1/;
> +
> +#include "msm8992.dtsi"
> +
> +/ {
> + model = "LGE MSM8992 BULLHEAD rev-1.01";
> + compatible = "qcom,msm8992";
> + /* required for bootloader to select correct board */
> + qcom,board-id = <0xb64 0>;
> +};
Why do we end
> +
> +/ {
and then restart the root node? Just keep the same node all the
time please.
> + aliases {
> + serial0 = &blsp1_uart2;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + soc {
> + serial@f991e000 {
> + status = "okay";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&blsp1_uart2_default>;
> + pinctrl-1 = <&blsp1_uart2_sleep>;
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
> new file mode 100644
> index 0000000..5d69a6b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
> @@ -0,0 +1,214 @@
> +/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,gcc-msm8994.h>
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. MSM 8992";
> + compatible = "qcom,msm8992";
> + // msm-id and pmic-id are needed by bootloader for
> + // selecting correct blob
> + qcom,msm-id = <251 0>, <252 0>;
> + qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
Can't these just be in the final dts file and not in the dtsi
file? Technically the pmic pairings are a board choice and not an
SoC choice so they shouldn't be here. The msm-id properties are
a little easier to justify, but then I thought we decided to only
put them in the boards that need them?
> + interrupt-parent = <&intc>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + chosen { };
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&CPU0>;
> + };
> + };
> + };
> +
> + CPU0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0 0x0>;
> + next-level-cache = <&L2_0>;
> + // The currents(uA) correspond to the frequencies in the
> + // frequency table.
> + current = < 18250 //384000 kHZ
> + 24330 //460800 kHZ
> + 26920 //600000 kHZ
> + 34600 //672000 kHz
> + 38150 //787200 kHZ
> + 46880 //864000 kHZ
> + 55940 //960000 kHZ
> + 81740 //1248000 kHZ
> + 105870>; //1440000 kHZ
I imagine these aren't used. Please remove them.
> + L2_0: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + };
> + };
> + };
> +
> + soc: soc { };
Just put the soc stuff here instead of having an empty node we
fill later please. That matches other qcom dtsi files.
> +
> + memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + device_type = "memory";
> + reg = <0 0 0 0>; // bootloader will update
> + };
> +
> + clocks {
> + xo_board: xo_board {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <19200000>;
> + };
> +
> + sleep_clk: sleep_clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + };
> + };
> +};
> +
> +&soc {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0 0xffffffff>;
> + compatible = "simple-bus";
> +
> + intc: interrupt-controller@f9000000 {
> + compatible = "qcom,msm-qgic2";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + reg = <0xf9000000 0x1000>,
> + <0xf9002000 0x1000>;
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <1 2 0xf08>,
> + <1 3 0xf08>,
> + <1 4 0xf08>,
> + <1 1 0xf08>;
> + clock-frequency = <19200000>;
Please remove this property.
> + };
This whole node should be outside of soc node.
> +
> + timer@f9020000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + compatible = "arm,armv7-timer-mem";
> + reg = <0xf9020000 0x1000>;
> + clock-frequency = <19200000>;
Please remove this property.
> +
> + frame@f9021000 {
> + frame-number = <0>;
> + interrupts = <0 9 0x4>,
> + <0 8 0x4>;
> + reg = <0xf9021000 0x1000>,
> + <0xf9022000 0x1000>;
> + };
> +
> + frame@f9023000 {
> + frame-number = <1>;
> + interrupts = <0 10 0x4>;
> + reg = <0xf9023000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@f9024000 {
> + frame-number = <2>;
> + interrupts = <0 11 0x4>;
> + reg = <0xf9024000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@f9025000 {
> + frame-number = <3>;
> + interrupts = <0 12 0x4>;
> + reg = <0xf9025000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@f9026000 {
> + frame-number = <4>;
> + interrupts = <0 13 0x4>;
> + reg = <0xf9026000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@f9027000 {
> + frame-number = <5>;
> + interrupts = <0 14 0x4>;
> + reg = <0xf9027000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@f9028000 {
> + frame-number = <6>;
> + interrupts = <0 15 0x4>;
> + reg = <0xf9028000 0x1000>;
> + status = "disabled";
> + };
> + };
> +
> + restart@fc4ab000 {
> + compatible = "qcom,pshold";
> + reg = <0xfc4ab000 0x4>;
> + };
> +
> + msmgpio: pinctrl@fd510000 {
> + compatible = "qcom,msm8994-pinctrl", "qcom,msm8974-pinctrl";
> + reg = <0xfd510000 0x4000>;
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + blsp1_uart2: serial@f991e000 {
> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> + reg = <0xf991e000 0x1000>;
> + interrupts = <0 108 0>;
Please add a trigger type and use the GIC_SPI/IRQ_TYPE_* macros.
> + status = "disabled";
> + clock-names = "core", "iface";
> + clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>,
> + <&clock_gcc GCC_BLSP1_AHB_CLK>;
> + };
> +
> + clock_gcc: qcom,gcc@fc400000 {
> + compatible = "qcom,gcc-8994";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + reg = <0xfc400000 0x2000>;
> + clock-names = "xo", "xo_a_clk";
What is this for? Please remove.
> + };
> +
> + clock_rpm: qcom,rpmcc@fc401880 {
> + compatible = "qcom,rpmcc";
What is this node? Please remove.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
