Am 21.10.2016 um 17:03 schrieb Shawn Guo: > On Fri, Oct 21, 2016 at 04:05:59PM +0200, Stefan Wahren wrote: >> Am 21.10.2016 um 15:53 schrieb Shawn Guo: >>> On Tue, Sep 13, 2016 at 05:51:02PM +0000, Stefan Wahren wrote: >>>> The i.MX23 / i.MX28 have a small amount of On-Chip RAM which is also necessary >>>> for suspend to RAM and standby mode. But before we need to remove the fake reg >>>> properties of all internal bus nodes as discussed in this thread [1]. >>>> >>>> This patch series requires Fabio Estevam's recent series "ARM: dts: imx23: >>>> Remove skeleton.dtsi inclusion" [2]. >>>> >>>> [1] - https://marc.info/?l=devicetree&m=146139948426520&w=2 >>> The page cannot be reached. I would like to understand the >>> background for this change. >> Strange, because i don't have any problems while clicking on the URL. >> >> It's an older discussion on the devicetree / kernel newbie mailing list >> with subject "strange dtc errors after adding sram node". Arnd suggested >> in the discussion to remove the reg property from the ahb node. >> >> Please try this one: http://www.spinics.net/lists/newbies/msg57652.html > If you go through 'Table 4-1. Address Map for i.MX28' of MCIMX28RM, you > should be able to find there are 3 AHB buses: ahb@0, ahb@80080000 and > ahb@c0000000. The ocram goes to ahb@0. The following change should be > the right one for ocram addition. Correct me if i'm wrong, but there is only one AHB bus and only the connected peripheral devices like ocram or USB controller have a memory mapped start address not the bus itself. > > diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi > index 0ad893bf5f43..8e5718df06b2 100644 > --- a/arch/arm/boot/dts/imx28.dtsi > +++ b/arch/arm/boot/dts/imx28.dtsi > @@ -47,6 +47,19 @@ > }; > }; > > + ahb@0 { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0x0 0x80000000>; > + ranges; > + > + ocram: sram@0 { > + compatible = "mmio-sram"; > + reg = <0x0 0x20000>; > + }; > + }; > + > apb@80000000 { > compatible = "simple-bus"; > #address-cells = <1>; > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
