Re: [PATCH v2 4/4] Cleaned the code, no functional changes.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, 2016-10-14 at 17:52 +0100, Luis.Oliveira@xxxxxxxxxxxx wrote:
> From: Luis Oliveira <lolivei@xxxxxxxxxxxx>
> 

Style issues.

The parts of this patch shouldn't be brought by the others patches in
the series. Consider carefully check your patches before submitting.

> Signed-off-by: Luis Oliveira <lolivei@xxxxxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-designware-core.c    | 113 ++++++++++++++-----
> ---------
>  drivers/i2c/busses/i2c-designware-platdrv.c |  24 +++---
>  2 files changed, 68 insertions(+), 69 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-designware-core.c
> b/drivers/i2c/busses/i2c-designware-core.c
> index 71a377e..4196491 100644
> --- a/drivers/i2c/busses/i2c-designware-core.c
> +++ b/drivers/i2c/busses/i2c-designware-core.c
> @@ -90,15 +90,15 @@
>  #define DW_IC_INTR_DEFAULT_MASK		(DW_IC_INTR_RX_FULL |
> \
>  					 DW_IC_INTR_TX_ABRT | \
>  					 DW_IC_INTR_STOP_DET)
>
> +
>  #define DW_IC_INTR_MASTER_MASK		(DW_IC_INTR_DEFAULT_MAS
> K | \
>  					 DW_IC_INTR_TX_EMPTY)
> -					 
> +
>  #define DW_IC_INTR_SLAVE_MASK		(DW_IC_INTR_DEFAULT_MASK
> | \
>  					 DW_IC_INTR_RX_DONE | \
> -                                    DW_IC_INTR_RX_UNDER | \
> -                                    DW_IC_INTR_RD_REQ)
> -					 
> +				    DW_IC_INTR_RX_UNDER | \
> +				    DW_IC_INTR_RD_REQ)
> +
>  #define DW_IC_STATUS_ACTIVITY		0x1
>  #define DW_IC_STATUS_TFE		BIT(2)
>  #define DW_IC_STATUS_MASTER_ACTIVITY	BIT(5)
> @@ -229,7 +229,7 @@ static void i2c_dw_configure_fifo_master(struct
> dw_i2c_dev *dev)
>  		dw_writel(dev, 0, DW_IC_RX_TL);
>  
>  		/* configure the i2c master */
> -		dw_writel(dev, dev->master_cfg , DW_IC_CON);
> +		dw_writel(dev, dev->master_cfg, DW_IC_CON);
>  		dw_writel(dev, DW_IC_INTR_MASTER_MASK,
> DW_IC_INTR_MASK);
>  }
>  
> @@ -240,7 +240,7 @@ static void i2c_dw_configure_fifo_slave(struct
> dw_i2c_dev *dev)
>  		dw_writel(dev, 0, DW_IC_RX_TL);
>  
>  		/* configure the i2c slave */
> -		dw_writel(dev, dev->slave_cfg , DW_IC_CON);
> +		dw_writel(dev, dev->slave_cfg, DW_IC_CON);
>  		dw_writel(dev, DW_IC_INTR_SLAVE_MASK,
> DW_IC_INTR_MASK);
>  }
>  
> @@ -386,8 +386,8 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
>  		/* Configure register access mode 16bit */
>  		dev->accessor_flags |= ACCESS_16BIT;
>  	} else if (reg != DW_IC_COMP_TYPE_VALUE) {
> -		dev_err(dev->dev, "Unknown Synopsys component type: "
> -			"0x%08x\n", reg);
> +		dev_err(dev->dev, "Unknown Synopsys component type:
> 0x%08x\n",
> +			reg);
>  		i2c_dw_release_lock(dev);
>  		return -ENODEV;
>  	}
> @@ -475,7 +475,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
>  	}
>  
>  	if ((dev->master_cfg & DW_IC_CON_MASTER) &&
> -		(dev->master_cfg & DW_IC_CON_SLAVE_DISABLE)) 
> +		(dev->master_cfg & DW_IC_CON_SLAVE_DISABLE))
>  		i2c_dw_configure_fifo_master(dev);
>  	else
>  		i2c_dw_configure_fifo_slave(dev);
> @@ -814,6 +814,7 @@ done_nolock:
>  static u32 i2c_dw_func(struct i2c_adapter *adap)
>  {
>  	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
> +
>  	return dev->functionality;
>  }
>  
> @@ -821,19 +822,19 @@ static int i2c_dw_reg_slave(struct i2c_client
> *slave)
>  {
>  	struct dw_i2c_dev *dev =  i2c_get_adapdata(slave->adapter);
>  
> -	if(dev->slave)
> +	if (dev->slave)
>  		return -EBUSY;
> -	if(slave->flags & I2C_CLIENT_TEN)
> +	if (slave->flags & I2C_CLIENT_TEN)
>  		return -EAFNOSUPPORT;
> -		/* set slave address in the IC_SAR register, 
> -		* the address to which the DW_apb_i2c responds */
> +		/* set slave address in the IC_SAR register,
> +		 * the address to which the DW_apb_i2c responds */
>  
>  	__i2c_dw_enable(dev, false);
> -	
> +
>  	dw_writel(dev, slave->addr, DW_IC_SAR);
>  
>  	pm_runtime_get_sync(dev->dev);
> -	
> +
>  	dev->slave = slave;
>  
>  	__i2c_dw_enable(dev, true);
> @@ -929,78 +930,76 @@ static u32 i2c_dw_read_clear_intrbits(struct
> dw_i2c_dev *dev)
>   * Interrupt service routine. This gets called whenever an I2C
> interrupt
>   * occurs.
>   */
>
> -static bool i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev )
> +
> +static bool i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
>  {
>  	u32 raw_stat, stat, enabled;
>  	u8 val, slave_activity;
> -	
> +
>  	stat = dw_readl(dev, DW_IC_INTR_STAT);
>  	enabled = dw_readl(dev, DW_IC_ENABLE);
>  	raw_stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
> -	slave_activity = ((dw_readl(dev,DW_IC_STATUS) & 
> -	DW_IC_STATUS_SLAVE_ACTIVITY)>>6);
> -		
> -	dev_dbg(dev->dev, 
> -	"%s: %#x SLAVE_ACTV=%#x : RAW_INTR_STAT=%#x :
> INTR_STAT=%#x\n", 
> -	 __func__, enabled, slave_activity, raw_stat, stat); 
> +	slave_activity = ((dw_readl(dev, DW_IC_STATUS)
> +		& DW_IC_STATUS_SLAVE_ACTIVITY)>>6);
> +
> +	dev_dbg(dev->dev,
> +	"%s: %#x SLAVE_ACTV=%#x : RAW_INTR_STAT=%#x :
> INTR_STAT=%#x\n",
> +	 __func__, enabled, slave_activity, raw_stat, stat);
>  
>  	if (stat & DW_IC_INTR_START_DET)
>  		dw_readl(dev, DW_IC_CLR_START_DET);
> -		
> +
>  	if (stat & DW_IC_INTR_ACTIVITY)
>  		dw_readl(dev, DW_IC_CLR_ACTIVITY);
>  
>  	if (stat & DW_IC_INTR_RX_OVER)
>  		dw_readl(dev, DW_IC_CLR_RX_OVER);
> -	
> -       if ((stat & DW_IC_INTR_RX_FULL) && (stat &
> DW_IC_INTR_STOP_DET)) 
> +
> +	if ((stat & DW_IC_INTR_RX_FULL) && (stat &
> DW_IC_INTR_STOP_DET))
>  		i2c_slave_event(dev->slave,
> I2C_SLAVE_WRITE_REQUESTED, &val);
> -	
> -	if (slave_activity) {     
> -		if (stat & DW_IC_INTR_RD_REQ) {                 
> +
> +	if (slave_activity) {
> +		if (stat & DW_IC_INTR_RD_REQ) {
>  			if (stat & DW_IC_INTR_RX_FULL) {
>  				val = dw_readl(dev, DW_IC_DATA_CMD);
> -				if (!i2c_slave_event(dev->slave, 
> +				if (!i2c_slave_event(dev->slave,
>  					I2C_SLAVE_WRITE_RECEIVED,
> &val)) {
> -					dev_dbg(dev->dev, "Byte %X
> acked! ",val);
> +					dev_dbg(dev->dev, "Byte %X
> acked! ", val);
>  				}
>  				dw_readl(dev, DW_IC_CLR_RD_REQ);
>  				stat =
> i2c_dw_read_clear_intrbits(dev);
> -			}
> -			else {
> +			} else {
>  				dw_readl(dev, DW_IC_CLR_RD_REQ);
>  				dw_readl(dev, DW_IC_CLR_RX_UNDER);
>  				stat =
> i2c_dw_read_clear_intrbits(dev);
> -			}     
> -			if (!i2c_slave_event(dev->slave, 
> +			}
> +			if (!i2c_slave_event(dev->slave,
>  					I2C_SLAVE_READ_REQUESTED,
> &val))
>  				dw_writel(dev, val, DW_IC_DATA_CMD);
>  		}
> -	}        
> -	
> +	}
> +
>  	if (stat & DW_IC_INTR_RX_DONE) {
> -		
> -		if (!i2c_slave_event(dev->slave,
> I2C_SLAVE_READ_PROCESSED, &val)) 
> +
> +		if (!i2c_slave_event(dev->slave,
> I2C_SLAVE_READ_PROCESSED, &val))
>  			dw_readl(dev, DW_IC_CLR_RX_DONE);
> -		
> -		i2c_slave_event(dev->slave, I2C_SLAVE_STOP , &val);
> +
> +		i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
>  		stat = i2c_dw_read_clear_intrbits(dev);
>  
>  		return true;
>  	}
> -        
> -	if (stat & DW_IC_INTR_RX_FULL) { 
> +
> +	if (stat & DW_IC_INTR_RX_FULL) {
>  		val = dw_readl(dev, DW_IC_DATA_CMD);
>  		if (!i2c_slave_event(dev->slave,
> I2C_SLAVE_WRITE_RECEIVED, &val))
> -			dev_dbg(dev->dev, "Byte %X acked! ",val);
> -	} 
> -	else {
> -		i2c_slave_event(dev->slave, I2C_SLAVE_STOP , &val);
> +			dev_dbg(dev->dev, "Byte %X acked! ", val);
> +	} else {
> +		i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
>  		stat = i2c_dw_read_clear_intrbits(dev);
>  	}
>  
> -	if (stat & DW_IC_INTR_TX_OVER) {		
> +	if (stat & DW_IC_INTR_TX_OVER) {
>  		dw_readl(dev, DW_IC_CLR_TX_OVER);
>  		return true;
>  	}
> @@ -1008,12 +1007,12 @@ static bool i2c_dw_irq_handler_slave(struct
> dw_i2c_dev *dev )
>  	return true;
>  }
>  
> -static bool i2c_dw_irq_handler_master(struct dw_i2c_dev *dev )
> +static bool i2c_dw_irq_handler_master(struct dw_i2c_dev *dev)
>  {
>  	u32 stat;
> -	
> +
>  	stat = i2c_dw_read_clear_intrbits(dev);
> -	
> +
>  	if (stat & DW_IC_INTR_TX_ABRT) {
>  		dev->cmd_err |= DW_IC_ERR_TX_ABRT;
>  		dev->status = STATUS_IDLE;
> @@ -1068,17 +1067,17 @@ static irqreturn_t i2c_dw_isr(int this_irq,
> void *dev_id)
>  	enabled = dw_readl(dev, DW_IC_ENABLE);
>  	mode = dw_readl(dev, DW_IC_CON);
>  	stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
> -	
> +
>  	dev_dbg(dev->dev, "%s: enabled=%#x stat=%#x\n", __func__,
> enabled, stat);
>  	if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
>  		return IRQ_NONE;
> -	
> +
>  	if (!(mode & DW_IC_CON_MASTER) && !(mode &
> DW_IC_CON_SLAVE_DISABLE)) {
>  		stat = i2c_dw_read_clear_intrbits(dev);
>  		if (!i2c_dw_irq_handler_slave(dev))
>  			return IRQ_NONE;
>  	} else {
> -	if(i2c_dw_irq_handler_master(dev))
> +	if (i2c_dw_irq_handler_master(dev))
>  		return IRQ_HANDLED;
>  	}
>  
> @@ -1148,7 +1147,7 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
>  	adap->dev.parent = dev->dev;
>  	i2c_set_adapdata(adap, dev);
>  
> -	if (!i2c_check_functionality(adap,I2C_FUNC_SLAVE)) 
> +	if (!i2c_check_functionality(adap, I2C_FUNC_SLAVE))
>  		i2c_dw_disable_int(dev);
>  
>  	r = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr,
> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c
> b/drivers/i2c/busses/i2c-designware-platdrv.c
> index f29e657..035b93f 100644
> --- a/drivers/i2c/busses/i2c-designware-platdrv.c
> +++ b/drivers/i2c/busses/i2c-designware-platdrv.c
> @@ -141,13 +141,13 @@ static inline int dw_i2c_acpi_configure(struct
> platform_device *pdev)
>  static void i2c_dw_configure_master(struct platform_device *pdev)
>  {
>  	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
> -	
> +
>  	dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE
> |
>  			  DW_IC_CON_RESTART_EN;
> -			  
> +
>  	dev->functionality |= I2C_FUNC_10BIT_ADDR;
>  	dev_info(&pdev->dev, "I am registed as a I2C Master!\n");
> -	
> +
>  	switch (dev->clk_freq) {
>  	case 100000:
>  		dev->master_cfg |= DW_IC_CON_SPEED_STD;
> @@ -158,25 +158,25 @@ static void i2c_dw_configure_master(struct
> platform_device *pdev)
>  	default:
>  		dev->master_cfg |= DW_IC_CON_SPEED_FAST;
>  	}
> -	
> +
>  }
>  
>  static void i2c_dw_configure_slave(struct platform_device *pdev)
>  {
>  	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
> -	
> -	dev->slave_cfg = DW_IC_CON_RX_FIFO_FULL_HLD_CTRL | 
> -			  DW_IC_CON_RESTART_EN |
> DW_IC_CON_STOP_DET_IFADDRESSED | 
> +
> +	dev->slave_cfg = DW_IC_CON_RX_FIFO_FULL_HLD_CTRL |
> +			  DW_IC_CON_RESTART_EN |
> DW_IC_CON_STOP_DET_IFADDRESSED |
>  			  DW_IC_CON_SPEED_FAST;
> -		  
> +
>  	dev->functionality |= I2C_FUNC_SLAVE;
>  	dev->functionality &= ~I2C_FUNC_10BIT_ADDR;
>  	dev_info(&pdev->dev, "I am registed as a I2C Slave!\n");
> -	
> +
>  	switch (dev->clk_freq) {
>  	case 100000:
>  		dev->slave_cfg |= DW_IC_CON_SPEED_STD;
> -		
> +
>  	case 3400000:
>  		dev->slave_cfg |= DW_IC_CON_SPEED_HIGH;
>  		break;
> @@ -272,10 +272,10 @@ static int dw_i2c_plat_probe(struct
> platform_device *pdev)
>  		I2C_FUNC_SMBUS_BYTE_DATA |
>  		I2C_FUNC_SMBUS_WORD_DATA |
>  		I2C_FUNC_SMBUS_I2C_BLOCK;
> -	
> +
>  	if (is_slave)
>  		i2c_dw_configure_slave(pdev);
> -	else 
> +	else
>  		i2c_dw_configure_master(pdev);
>  
>  	dev->clk = devm_clk_get(&pdev->dev, NULL);

-- 
Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Intel Finland Oy
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux