On Thu, Oct 20, 2016 at 05:30:12PM -0700, Rajat Jain wrote:
> From: Xinming Hu <huxm@xxxxxxxxxxx>
>
> This patch derives device tree node from pcie bus layer framework.
> Device tree bindings file has been renamed(marvell-sd8xxx.txt ->
> marvell-8xxx.txt) to accomodate PCIe changes.
>
> Signed-off-by: Xinming Hu <huxm@xxxxxxxxxxx>
> Signed-off-by: Amitkumar Karwar <akarwar@xxxxxxxxxxx>
> Signed-off-by: Rajat Jain <rajatja@xxxxxxxxxx>
> ---
> Since I need this patch and haven't seen updates, I thought I'll take a stab.
>
> v2: Included vendor and product IDs in compatible strings for PCIe
> chipsets(Rob Herring)
> v3: Patch is created using -M option so that it will only include diff of
> original and renamed files(Rob Herring)
> Resend v3: Resending the patch because I missed to include device tree mailing
> while sending v3.
> v4: Fix error handling, also move-on even if no device tree node is present.
>
> .../{marvell-sd8xxx.txt => marvell-8xxx.txt} | 8 +++--
> drivers/net/wireless/marvell/mwifiex/pcie.c | 39 +++++++++++++++++++---
> drivers/net/wireless/marvell/mwifiex/sta_cmd.c | 3 +-
> 3 files changed, 42 insertions(+), 8 deletions(-)
> rename Documentation/devicetree/bindings/net/wireless/{marvell-sd8xxx.txt => marvell-8xxx.txt} (91%)
Patch looks better to me (esp. the error handling):
Reviewed-by: Brian Norris <briannorris@xxxxxxxxxxxx>
> diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
> similarity index 91%
> rename from Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt
> rename to Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
> index c421aba..dfe5f8e 100644
> --- a/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt
> +++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
> @@ -1,8 +1,8 @@
> -Marvell 8897/8997 (sd8897/sd8997) SDIO devices
> +Marvell 8897/8997 (sd8897/sd8997/pcie8997) SDIO/PCIE devices
> ------
>
> -This node provides properties for controlling the marvell sdio wireless device.
> -The node is expected to be specified as a child node to the SDIO controller that
> +This node provides properties for controlling the marvell sdio/pcie wireless device.
> +The node is expected to be specified as a child node to the SDIO/PCIE controller that
> connects the device to the system.
>
> Required properties:
> @@ -10,6 +10,8 @@ Required properties:
> - compatible : should be one of the following:
> * "marvell,sd8897"
> * "marvell,sd8997"
> + * "pci11ab,2b42"
> + * "pci1b4b,2b42"
>
> Optional properties:
>
> diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
> index 3c3c4f1..b3e6f06 100644
> --- a/drivers/net/wireless/marvell/mwifiex/pcie.c
> +++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
> @@ -37,6 +37,22 @@ static struct mwifiex_if_ops pcie_ops;
>
> static struct semaphore add_remove_card_sem;
>
> +static const struct of_device_id mwifiex_pcie_of_match_table[] = {
> + { .compatible = "pci11ab,2b42" },
> + { .compatible = "pci1b4b,2b42" },
> + { }
> +};
> +
> +static int mwifiex_pcie_probe_of(struct device *dev)
> +{
> + if (!of_match_node(mwifiex_pcie_of_match_table, dev->of_node)) {
> + pr_err("pcie device node not available");
> + return -1;
Not a big fan of these '-1' error codes, instead or proper error codes.
But that's preexisting. (Or at least, this matches the sdio.c version.)
> + }
> +
> + return 0;
> +}
> +
> static int
> mwifiex_map_pci_memory(struct mwifiex_adapter *adapter, struct sk_buff *skb,
> size_t size, int flags)
> @@ -178,6 +194,7 @@ static int mwifiex_pcie_probe(struct pci_dev *pdev,
> const struct pci_device_id *ent)
> {
> struct pcie_service_card *card;
> + int ret;
>
> pr_debug("info: vendor=0x%4.04X device=0x%4.04X rev=%d\n",
> pdev->vendor, pdev->device, pdev->revision);
> @@ -199,13 +216,27 @@ static int mwifiex_pcie_probe(struct pci_dev *pdev,
> card->pcie.can_ext_scan = data->can_ext_scan;
> }
>
> - if (mwifiex_add_card(card, &add_remove_card_sem, &pcie_ops,
> - MWIFIEX_PCIE)) {
> - pr_err("%s failed\n", __func__);
> - return -1;
> + /* device tree node parsing and platform specific configuration*/
> + if (pdev->dev.of_node) {
> + ret = mwifiex_pcie_probe_of(&pdev->dev);
> + if (ret) {
> + dev_err(&pdev->dev,
> + "required compatible string missing\n");
> + goto err_free;
> + }
> }
>
> + ret = mwifiex_add_card(card, &add_remove_card_sem, &pcie_ops,
> + MWIFIEX_PCIE);
> + if (ret) {
> + pr_err("%s failed\n", __func__);
> + goto err_free;
> + }
> return 0;
> +
> +err_free:
> + kfree(card);
Is it just me, or does this fix a memory leak too? Not a big deal IMO,
but maybe worth noting.
Brian
> + return ret;
> }
>
> /*
> diff --git a/drivers/net/wireless/marvell/mwifiex/sta_cmd.c b/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
> index 2a162c3..c8dccf5 100644
> --- a/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
> +++ b/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
> @@ -2218,7 +2218,8 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta, bool init)
> * The cal-data can be read from device tree and/or
> * a configuration file and downloaded to firmware.
> */
> - if (priv->adapter->iface_type == MWIFIEX_SDIO &&
> + if ((priv->adapter->iface_type == MWIFIEX_SDIO ||
> + priv->adapter->iface_type == MWIFIEX_PCIE) &&
> adapter->dev->of_node) {
> adapter->dt_node = adapter->dev->of_node;
> if (of_property_read_u32(adapter->dt_node,
> --
> 2.8.0.rc3.226.g39d4020
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
