On Fri, Oct 14, 2016 at 02:57:22PM +0530, Jagan Teki wrote: > From: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> > > Add usbotg support for Engicam i.CoreM6 dql modules. > > Cc: Sascha Hauer <kernel@xxxxxxxxxxxxxx> > Cc: Fabio Estevam <fabio.estevam@xxxxxxx> > Cc: Shawn Guo <shawnguo@xxxxxxxxxx> > Cc: Matteo Lisi <matteo.lisi@xxxxxxxxxxx> > Cc: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx> > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> > --- > Changes for v7: > - none > Changes for v6: > - none > Changes for v5: > - none > Changes for v4: > - new patch > > arch/arm/boot/dts/imx6qdl-icore.dtsi | 23 +++++++++++++++++++++++ > 1 file changed, 23 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi > index ffec879..4e79858 100644 > --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi > @@ -65,6 +65,15 @@ > regulator-boot-on; > regulator-always-on; > }; > + > + reg_usb_otg_vbus: usb_otg_vbus { Same as host patch, please fix the node name. Shawn > + compatible = "regulator-fixed"; > + regulator-name = "usb_otg_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-boot-on; > + regulator-always-on; > + }; > }; > > &can1 { > @@ -124,6 +133,14 @@ > status = "okay"; > }; > > +&usbotg { > + vbus-supply = <®_usb_otg_vbus>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usbotg>; > + disable-over-current; > + status = "okay"; > +}; > + > &usdhc1 { > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_usdhc1>; > @@ -198,6 +215,12 @@ > >; > }; > > + pinctrl_usbotg: usbotggrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 > + >; > + }; > + > pinctrl_usdhc1: usdhc1grp { > fsl,pins = < > MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17070 > -- > 2.7.4 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html