[PATCH v6 1/5] ASoC: codecs: Add msm8916-wcd analog codec

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




msm8916-wcd codec is found in Qualcomm msm8916 and apq8016 processors.
This codec IP is split in to two parts (Digital & Analog).
Analog part is integrated in to PMIC PM8916 and the digital part is
integrated into Application processor. Data transfer between Analog and
Digital Die is done via a internal bus called PDM.

This patch adds support to Analog part of the Codec which is integrated
into PMIC PM8916.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
 .../bindings/sound/qcom,msm8916-wcd-analog.txt     |  85 ++
 sound/soc/codecs/Kconfig                           |   4 +
 sound/soc/codecs/Makefile                          |   3 +-
 sound/soc/codecs/msm8916-wcd-analog.c              | 890 +++++++++++++++++++++
 4 files changed, 981 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
 create mode 100644 sound/soc/codecs/msm8916-wcd-analog.c

diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
new file mode 100644
index 0000000..ccb401c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
@@ -0,0 +1,85 @@
+msm8916 analog audio CODEC
+
+Bindings for codec Analog IP which is integrated in pmic pm8916,
+
+## Bindings for codec core on pmic:
+
+Required properties
+ - compatible = "qcom,pm8916-wcd-analog-codec";
+ - reg: represents the slave base address provided to the peripheral.
+ - interrupt-parent : The parent interrupt controller.
+ - interrupts: List of interrupts in given SPMI peripheral.
+ - interrupt-names: Names specified to above list of interrupts in same
+		    order. List of supported interrupt names are:
+  "cdc_spk_cnp_int" - Speaker click and pop interrupt.
+  "cdc_spk_clip_int" - Speaker clip interrupt.
+  "cdc_spk_ocp_int" - Speaker over current protect interrupt.
+  "mbhc_ins_rem_det1" - jack insert removal detect interrupt 1.
+  "mbhc_but_rel_det" - button release interrupt.
+  "mbhc_but_press_det" - button press event
+  "mbhc_ins_rem_det" - jack insert removal detect interrupt.
+  "mbhc_switch_int"	- multi button headset interrupt.
+  "cdc_ear_ocp_int" - Earphone over current protect interrupt.
+  "cdc_hphr_ocp_int" - Headphone R over current protect interrupt.
+  "cdc_hphl_ocp_det" - Headphone L over current protect interrupt.
+  "cdc_ear_cnp_int" - earphone cnp interrupt.
+  "cdc_hphr_cnp_int" - hphr click and pop interrupt.
+  "cdc_hphl_cnp_int" - hphl click and pop interrupt.
+
+ - clocks: Handle to mclk.
+ - clock-names: should be "mclk"
+ - vdd-cdc-io-supply: phandle to VDD_CDC_IO regulator DT node.
+ - vdd-cdc-tx-rx-cx-supply: phandle to VDD_CDC_TX/RX/CX regulator DT node.
+ - vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node.
+
+Optional Properties:
+- qcom,micbias1-ext-cap: boolean, present if micbias1 has external capacitor
+			 connected.
+- qcom,micbias2-ext-cap: boolean, present if micbias2 has external capacitor
+			 connected.
+
+Example:
+
+spmi_bus {
+	...
+	audio-codec@f000{
+		compatible = "qcom,pm8916-wcd-analog-codec";
+		reg = <0xf000 0x200>;
+		reg-names = "pmic-codec-core";
+		clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+		clock-names = "mclk";
+		interrupt-parent = <&spmi_bus>;
+		interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
+		interrupt-names = "cdc_spk_cnp_int",
+				  "cdc_spk_clip_int",
+				  "cdc_spk_ocp_int",
+				  "mbhc_ins_rem_det1",
+				  "mbhc_but_rel_det",
+				  "mbhc_but_press_det",
+				  "mbhc_ins_rem_det",
+				  "mbhc_switch_int",
+				  "cdc_ear_ocp_int",
+				  "cdc_hphr_ocp_int",
+				  "cdc_hphl_ocp_det",
+				  "cdc_ear_cnp_int",
+				  "cdc_hphr_cnp_int",
+				  "cdc_hphl_cnp_int";
+	               VDD-CDC-IO-supply = <&pm8916_l5>;
+	               VDD-CDC-TX-RX-CX-supply = <&pm8916_l5>;
+	               VDD-MICBIAS-supply = <&pm8916_l13>;
+	               #sound-dai-cells = <1>;
+	};
+};
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index c67667b..4a98ce6 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -581,6 +581,10 @@ config SND_SOC_MAX9860
 	depends on I2C
 	select REGMAP_I2C
 
+config SND_SOC_MSM8916_WCD_ANALOG
+	tristate "Qualcomm MSM8916 WCD Analog Codec"
+	depends on SPMI || COMPILE_TEST
+
 config SND_SOC_PCM1681
 	tristate "Texas Instruments PCM1681 CODEC"
 	depends on I2C
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 958cd49..32d9018 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -86,6 +86,7 @@ snd-soc-max9850-objs := max9850.o
 snd-soc-max9860-objs := max9860.o
 snd-soc-mc13783-objs := mc13783.o
 snd-soc-ml26124-objs := ml26124.o
+snd-soc-msm8916-analog-objs := msm8916-wcd-analog.o
 snd-soc-nau8810-objs := nau8810.o
 snd-soc-nau8825-objs := nau8825.o
 snd-soc-hdmi-codec-objs := hdmi-codec.o
@@ -214,7 +215,6 @@ snd-soc-wm9705-objs := wm9705.o
 snd-soc-wm9712-objs := wm9712.o
 snd-soc-wm9713-objs := wm9713.o
 snd-soc-wm-hubs-objs := wm_hubs.o
-
 # Amp
 snd-soc-max9877-objs := max9877.o
 snd-soc-max98504-objs := max98504.o
@@ -310,6 +310,7 @@ obj-$(CONFIG_SND_SOC_MAX9850)	+= snd-soc-max9850.o
 obj-$(CONFIG_SND_SOC_MAX9860)	+= snd-soc-max9860.o
 obj-$(CONFIG_SND_SOC_MC13783)	+= snd-soc-mc13783.o
 obj-$(CONFIG_SND_SOC_ML26124)	+= snd-soc-ml26124.o
+obj-$(CONFIG_SND_SOC_MSM8916_WCD_ANALOG) +=snd-soc-msm8916-analog.o
 obj-$(CONFIG_SND_SOC_NAU8810)   += snd-soc-nau8810.o
 obj-$(CONFIG_SND_SOC_NAU8825)   += snd-soc-nau8825.o
 obj-$(CONFIG_SND_SOC_HDMI_CODEC)	+= snd-soc-hdmi-codec.o
diff --git a/sound/soc/codecs/msm8916-wcd-analog.c b/sound/soc/codecs/msm8916-wcd-analog.c
new file mode 100644
index 0000000..d9f999b
--- /dev/null
+++ b/sound/soc/codecs/msm8916-wcd-analog.c
@@ -0,0 +1,890 @@
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+#include <linux/types.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <sound/soc.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/tlv.h>
+
+#define CDC_D_REVISION1			(0xf000)
+#define CDC_D_PERPH_SUBTYPE		(0xf005)
+#define CDC_D_CDC_RST_CTL		(0xf046)
+#define RST_CTL_DIG_SW_RST_N_MASK	BIT(7)
+#define RST_CTL_DIG_SW_RST_N_RESET	0
+#define RST_CTL_DIG_SW_RST_N_REMOVE_RESET BIT(7)
+
+#define CDC_D_CDC_TOP_CLK_CTL		(0xf048)
+#define TOP_CLK_CTL_A_MCLK_MCLK2_EN_MASK (BIT(2) | BIT(3))
+#define TOP_CLK_CTL_A_MCLK_EN_ENABLE	 BIT(2)
+#define TOP_CLK_CTL_A_MCLK2_EN_ENABLE	BIT(3)
+
+#define CDC_D_CDC_ANA_CLK_CTL		(0xf049)
+#define ANA_CLK_CTL_EAR_HPHR_CLK_EN_MASK BIT(0)
+#define ANA_CLK_CTL_EAR_HPHR_CLK_EN	BIT(0)
+#define ANA_CLK_CTL_EAR_HPHL_CLK_EN	BIT(1)
+#define ANA_CLK_CTL_SPKR_CLK_EN_MASK	BIT(4)
+#define ANA_CLK_CTL_SPKR_CLK_EN	BIT(4)
+#define ANA_CLK_CTL_TXA_CLK25_EN	BIT(5)
+
+#define CDC_D_CDC_DIG_CLK_CTL		(0xf04A)
+#define DIG_CLK_CTL_RXD1_CLK_EN		BIT(0)
+#define DIG_CLK_CTL_RXD2_CLK_EN		BIT(1)
+#define DIG_CLK_CTL_RXD3_CLK_EN		BIT(3)
+#define DIG_CLK_CTL_TXD_CLK_EN		BIT(4)
+#define DIG_CLK_CTL_NCP_CLK_EN_MASK	BIT(6)
+#define DIG_CLK_CTL_NCP_CLK_EN		BIT(6)
+#define DIG_CLK_CTL_RXD_PDM_CLK_EN_MASK	BIT(7)
+#define DIG_CLK_CTL_RXD_PDM_CLK_EN	BIT(7)
+
+#define CDC_D_CDC_CONN_TX1_CTL		(0xf050)
+#define CONN_TX1_SERIAL_TX1_MUX		GENMASK(1, 0)
+#define CONN_TX1_SERIAL_TX1_ADC_1	0x0
+#define CONN_TX1_SERIAL_TX1_RX_PDM_LB	0x1
+#define CONN_TX1_SERIAL_TX1_ZERO	0x2
+
+#define CDC_D_CDC_CONN_TX2_CTL		(0xf051)
+#define CONN_TX2_SERIAL_TX2_MUX		GENMASK(1, 0)
+#define CONN_TX2_SERIAL_TX2_ADC_2	0x0
+#define CONN_TX2_SERIAL_TX2_RX_PDM_LB	0x1
+#define CONN_TX2_SERIAL_TX2_ZERO	0x2
+#define CDC_D_CDC_CONN_HPHR_DAC_CTL	(0xf052)
+#define CDC_D_CDC_CONN_RX1_CTL		(0xf053)
+#define CDC_D_CDC_CONN_RX2_CTL		(0xf054)
+#define CDC_D_CDC_CONN_RX3_CTL		(0xf055)
+#define CDC_D_CDC_CONN_RX_LB_CTL	(0xf056)
+#define CDC_D_SEC_ACCESS		(0xf0D0)
+#define CDC_D_PERPH_RESET_CTL3		(0xf0DA)
+#define CDC_D_PERPH_RESET_CTL4		(0xf0DB)
+#define CDC_A_REVISION1			(0xf100)
+#define CDC_A_REVISION2			(0xf101)
+#define CDC_A_REVISION3			(0xf102)
+#define CDC_A_REVISION4			(0xf103)
+#define CDC_A_PERPH_TYPE		(0xf104)
+#define CDC_A_PERPH_SUBTYPE		(0xf105)
+#define CDC_A_INT_RT_STS		(0xf110)
+#define CDC_A_INT_SET_TYPE		(0xf111)
+#define CDC_A_INT_POLARITY_HIGH		(0xf112)
+#define CDC_A_INT_POLARITY_LOW		(0xf113)
+#define CDC_A_INT_LATCHED_CLR		(0xf114)
+#define CDC_A_INT_EN_SET		(0xf115)
+#define CDC_A_INT_EN_CLR		(0xf116)
+#define CDC_A_INT_LATCHED_STS		(0xf118)
+#define CDC_A_INT_PENDING_STS		(0xf119)
+#define CDC_A_INT_MID_SEL		(0xf11A)
+#define CDC_A_INT_PRIORITY		(0xf11B)
+#define CDC_A_MICB_1_EN			(0xf140)
+#define MICB_1_EN_MICB_ENABLE		BIT(7)
+#define MICB_1_EN_BYP_CAP_MASK		BIT(6)
+#define MICB_1_EN_NO_EXT_BYP_CAP	BIT(6)
+#define MICB_1_EN_EXT_BYP_CAP		0
+#define MICB_1_EN_PULL_DOWN_EN_MASK	BIT(5)
+#define MICB_1_EN_PULL_DOWN_EN_ENABLE	BIT(5)
+#define MICB_1_EN_OPA_STG2_TAIL_CURR_MASK GENMASK(3, 1)
+#define MICB_1_EN_OPA_STG2_TAIL_CURR_1_60UA	(0x4)
+#define MICB_1_EN_PULL_UP_EN_MASK	BIT(4)
+#define MICB_1_EN_TX3_GND_SEL_MASK	BIT(0)
+#define MICB_1_EN_TX3_GND_SEL_TX_GND	0
+
+#define CDC_A_MICB_1_VAL		(0xf141)
+#define MICB_1_VAL_MICB_OUT_VAL_MASK	GENMASK(7, 3)
+#define MICB_1_VAL_MICB_OUT_VAL_V2P70V	((0x16)  << 3)
+#define CDC_A_MICB_1_CTL		(0xf142)
+
+#define MICB_1_CTL_CFILT_REF_SEL_MASK		BIT(1)
+#define MICB_1_CTL_CFILT_REF_SEL_HPF_REF	BIT(1)
+#define MICB_1_CTL_EXT_PRECHARG_EN_MASK		BIT(5)
+#define MICB_1_CTL_EXT_PRECHARG_EN_ENABLE	BIT(5)
+#define MICB_1_CTL_INT_PRECHARG_BYP_MASK	BIT(6)
+#define MICB_1_CTL_INT_PRECHARG_BYP_EXT_PRECHRG_SEL	BIT(6)
+
+#define CDC_A_MICB_1_INT_RBIAS			(0xf143)
+#define MICB_1_INT_TX1_INT_RBIAS_EN_MASK	BIT(7)
+#define MICB_1_INT_TX1_INT_RBIAS_EN_ENABLE	BIT(7)
+#define MICB_1_INT_TX1_INT_RBIAS_EN_DISABLE	0
+
+#define MICB_1_INT_TX1_INT_PULLUP_EN_MASK	BIT(6)
+#define MICB_1_INT_TX1_INT_PULLUP_EN_TX1N_TO_MICBIAS BIT(6)
+#define MICB_1_INT_TX1_INT_PULLUP_EN_TX1N_TO_GND	0
+
+#define MICB_1_INT_TX2_INT_RBIAS_EN_MASK	BIT(4)
+#define MICB_1_INT_TX2_INT_RBIAS_EN_ENABLE	BIT(4)
+#define MICB_1_INT_TX2_INT_RBIAS_EN_DISABLE	0
+#define MICB_1_INT_TX2_INT_PULLUP_EN_MASK	BIT(3)
+#define MICB_1_INT_TX2_INT_PULLUP_EN_TX1N_TO_MICBIAS BIT(3)
+#define MICB_1_INT_TX2_INT_PULLUP_EN_TX1N_TO_GND	0
+
+#define MICB_1_INT_TX3_INT_RBIAS_EN_MASK	BIT(1)
+#define MICB_1_INT_TX3_INT_RBIAS_EN_ENABLE	BIT(1)
+#define MICB_1_INT_TX3_INT_RBIAS_EN_DISABLE	0
+#define MICB_1_INT_TX3_INT_PULLUP_EN_MASK	BIT(0)
+#define MICB_1_INT_TX3_INT_PULLUP_EN_TX1N_TO_MICBIAS BIT(0)
+#define MICB_1_INT_TX3_INT_PULLUP_EN_TX1N_TO_GND	0
+
+#define CDC_A_MICB_2_EN			(0xf144)
+#define CDC_A_TX_1_2_ATEST_CTL_2	(0xf145)
+#define CDC_A_MASTER_BIAS_CTL		(0xf146)
+#define CDC_A_TX_1_EN			(0xf160)
+#define CDC_A_TX_2_EN			(0xf161)
+#define CDC_A_TX_1_2_TEST_CTL_1		(0xf162)
+#define CDC_A_TX_1_2_TEST_CTL_2		(0xf163)
+#define CDC_A_TX_1_2_ATEST_CTL		(0xf164)
+#define CDC_A_TX_1_2_OPAMP_BIAS		(0xf165)
+#define CDC_A_TX_3_EN			(0xf167)
+#define CDC_A_NCP_EN			(0xf180)
+#define CDC_A_NCP_CLK			(0xf181)
+#define CDC_A_NCP_FBCTRL		(0xf183)
+#define CDC_A_NCP_FBCTRL_FB_CLK_INV_MASK	BIT(5)
+#define CDC_A_NCP_FBCTRL_FB_CLK_INV		BIT(5)
+#define CDC_A_NCP_BIAS			(0xf184)
+#define CDC_A_NCP_VCTRL			(0xf185)
+#define CDC_A_NCP_TEST			(0xf186)
+#define CDC_A_NCP_CLIM_ADDR		(0xf187)
+#define CDC_A_RX_CLOCK_DIVIDER		(0xf190)
+#define CDC_A_RX_COM_OCP_CTL		(0xf191)
+#define CDC_A_RX_COM_OCP_COUNT		(0xf192)
+#define CDC_A_RX_COM_BIAS_DAC		(0xf193)
+#define RX_COM_BIAS_DAC_RX_BIAS_EN_MASK		BIT(7)
+#define RX_COM_BIAS_DAC_RX_BIAS_EN_ENABLE	BIT(7)
+#define RX_COM_BIAS_DAC_DAC_REF_EN_MASK		BIT(0)
+#define RX_COM_BIAS_DAC_DAC_REF_EN_ENABLE	BIT(0)
+
+#define CDC_A_RX_HPH_BIAS_PA		(0xf194)
+#define CDC_A_RX_HPH_BIAS_LDO_OCP	(0xf195)
+#define CDC_A_RX_HPH_BIAS_CNP		(0xf196)
+#define CDC_A_RX_HPH_CNP_EN		(0xf197)
+#define CDC_A_RX_HPH_L_PA_DAC_CTL	(0xf19B)
+#define RX_HPA_L_PA_DAC_CTL_DATA_RESET_MASK	BIT(1)
+#define RX_HPA_L_PA_DAC_CTL_DATA_RESET_RESET	BIT(1)
+#define CDC_A_RX_HPH_R_PA_DAC_CTL	(0xf19D)
+#define RX_HPH_R_PA_DAC_CTL_DATA_RESET	BIT(1)
+#define RX_HPH_R_PA_DAC_CTL_DATA_RESET_MASK BIT(1)
+
+#define CDC_A_RX_EAR_CTL			(0xf19E)
+#define RX_EAR_CTL_SPK_VBAT_LDO_EN_MASK		BIT(0)
+#define RX_EAR_CTL_SPK_VBAT_LDO_EN_ENABLE	BIT(0)
+
+#define CDC_A_SPKR_DAC_CTL		(0xf1B0)
+#define SPKR_DAC_CTL_DAC_RESET_MASK	BIT(4)
+#define SPKR_DAC_CTL_DAC_RESET_NORMAL	0
+
+#define CDC_A_SPKR_DRV_CTL		(0xf1B2)
+#define SPKR_DRV_CTL_DEF_MASK		0xEF
+#define SPKR_DRV_CLASSD_PA_EN_MASK	BIT(7)
+#define SPKR_DRV_CLASSD_PA_EN_ENABLE	BIT(7)
+#define SPKR_DRV_CAL_EN			BIT(6)
+#define SPKR_DRV_SETTLE_EN		BIT(5)
+#define SPKR_DRV_FW_EN			BIT(3)
+#define SPKR_DRV_BOOST_SET		BIT(2)
+#define SPKR_DRV_CMFB_SET		BIT(1)
+#define SPKR_DRV_GAIN_SET		BIT(0)
+#define SPKR_DRV_CTL_DEF_VAL (SPKR_DRV_CLASSD_PA_EN_ENABLE | \
+		SPKR_DRV_CAL_EN | SPKR_DRV_SETTLE_EN | \
+		SPKR_DRV_FW_EN | SPKR_DRV_BOOST_SET | \
+		SPKR_DRV_CMFB_SET | SPKR_DRV_GAIN_SET)
+#define CDC_A_SPKR_OCP_CTL		(0xf1B4)
+#define CDC_A_SPKR_PWRSTG_CTL		(0xf1B5)
+#define SPKR_PWRSTG_CTL_DAC_EN_MASK	BIT(0)
+#define SPKR_PWRSTG_CTL_DAC_EN		BIT(0)
+#define SPKR_PWRSTG_CTL_MASK		0xE0
+#define SPKR_PWRSTG_CTL_BBM_MASK	BIT(7)
+#define SPKR_PWRSTG_CTL_BBM_EN		BIT(7)
+#define SPKR_PWRSTG_CTL_HBRDGE_EN_MASK	BIT(6)
+#define SPKR_PWRSTG_CTL_HBRDGE_EN	BIT(6)
+#define SPKR_PWRSTG_CTL_CLAMP_EN_MASK	BIT(5)
+#define SPKR_PWRSTG_CTL_CLAMP_EN	BIT(5)
+
+#define CDC_A_SPKR_DRV_DBG		(0xf1B7)
+#define CDC_A_CURRENT_LIMIT		(0xf1C0)
+#define CDC_A_BOOST_EN_CTL		(0xf1C3)
+#define CDC_A_SLOPE_COMP_IP_ZERO	(0xf1C4)
+#define CDC_A_SEC_ACCESS		(0xf1D0)
+#define CDC_A_PERPH_RESET_CTL3		(0xf1DA)
+#define CDC_A_PERPH_RESET_CTL4		(0xf1DB)
+
+#define MSM8916_WCD_ANALOG_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\
+			SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000)
+#define MSM8916_WCD_ANALOG_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
+				    SNDRV_PCM_FMTBIT_S24_LE)
+
+static const char * const supply_names[] = {
+	"vdd-cdc-io",
+	"vdd-cdc-tx-rx-cx",
+};
+
+struct pm8916_wcd_analog_priv {
+	u16 pmic_rev;
+	u16 codec_version;
+	struct clk *mclk;
+	struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
+	bool micbias1_cap_mode;
+	bool micbias2_cap_mode;
+};
+
+static const char *const adc2_mux_text[] = { "ZERO", "INP2", "INP3" };
+static const char *const rdac2_mux_text[] = { "ZERO", "RX2", "RX1" };
+static const char *const hph_text[] = { "ZERO", "Switch", };
+
+static const struct soc_enum hph_enum = SOC_ENUM_SINGLE_VIRT(
+					ARRAY_SIZE(hph_text), hph_text);
+
+static const struct snd_kcontrol_new hphl_mux = SOC_DAPM_ENUM("HPHL", hph_enum);
+static const struct snd_kcontrol_new hphr_mux = SOC_DAPM_ENUM("HPHR", hph_enum);
+
+/* ADC2 MUX */
+static const struct soc_enum adc2_enum = SOC_ENUM_SINGLE_VIRT(
+			ARRAY_SIZE(adc2_mux_text), adc2_mux_text);
+
+/* RDAC2 MUX */
+static const struct soc_enum rdac2_mux_enum = SOC_ENUM_SINGLE(
+			CDC_D_CDC_CONN_HPHR_DAC_CTL, 0, 3, rdac2_mux_text);
+
+static const struct snd_kcontrol_new spkr_switch[] = {
+	SOC_DAPM_SINGLE("Switch", CDC_A_SPKR_DAC_CTL, 7, 1, 0)
+};
+
+static const struct snd_kcontrol_new rdac2_mux = SOC_DAPM_ENUM(
+					"RDAC2 MUX Mux", rdac2_mux_enum);
+static const struct snd_kcontrol_new tx_adc2_mux = SOC_DAPM_ENUM(
+					"ADC2 MUX Mux", adc2_enum);
+
+/* Analog Gain control 0 dB to +24 dB in 6 dB steps */
+static const DECLARE_TLV_DB_SCALE(analog_gain, 0, 600, 0);
+
+static const struct snd_kcontrol_new pm8916_wcd_analog_snd_controls[] = {
+	SOC_SINGLE_TLV("ADC1 Volume", CDC_A_TX_1_EN, 3, 8, 0, analog_gain),
+	SOC_SINGLE_TLV("ADC2 Volume", CDC_A_TX_2_EN, 3, 8, 0, analog_gain),
+	SOC_SINGLE_TLV("ADC3 Volume", CDC_A_TX_3_EN, 3, 8, 0, analog_gain),
+};
+
+static void pm8916_wcd_analog_micbias_enable(struct snd_soc_codec *codec)
+{
+	snd_soc_update_bits(codec, CDC_A_MICB_1_CTL,
+			    MICB_1_CTL_EXT_PRECHARG_EN_MASK |
+			    MICB_1_CTL_INT_PRECHARG_BYP_MASK,
+			    MICB_1_CTL_INT_PRECHARG_BYP_EXT_PRECHRG_SEL
+			    | MICB_1_CTL_EXT_PRECHARG_EN_ENABLE);
+
+	snd_soc_write(codec, CDC_A_MICB_1_VAL, MICB_1_VAL_MICB_OUT_VAL_V2P70V);
+	/*
+	 * Special headset needs MICBIAS as 2.7V so wait for
+	 * 50 msec for the MICBIAS to reach 2.7 volts.
+	 */
+	msleep(50);
+	snd_soc_update_bits(codec, CDC_A_MICB_1_CTL,
+			    MICB_1_CTL_EXT_PRECHARG_EN_MASK |
+			    MICB_1_CTL_INT_PRECHARG_BYP_MASK, 0);
+
+}
+
+static int pm8916_wcd_analog_enable_micbias_ext(struct snd_soc_codec
+						 *codec, int event,
+						 int reg, u32 cap_mode)
+{
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		pm8916_wcd_analog_micbias_enable(codec);
+		snd_soc_update_bits(codec, CDC_A_MICB_1_EN,
+				    MICB_1_EN_BYP_CAP_MASK, cap_mode);
+		break;
+	}
+
+	return 0;
+}
+
+static int pm8916_wcd_analog_enable_micbias_int(struct snd_soc_codec
+						 *codec, int event,
+						 int reg, u32 cap_mode)
+{
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		snd_soc_update_bits(codec, CDC_A_MICB_1_INT_RBIAS,
+				    MICB_1_INT_TX2_INT_RBIAS_EN_MASK,
+				    MICB_1_INT_TX2_INT_RBIAS_EN_ENABLE);
+		snd_soc_update_bits(codec, reg, MICB_1_EN_PULL_DOWN_EN_MASK, 0);
+		snd_soc_update_bits(codec, CDC_A_MICB_1_EN,
+				    MICB_1_EN_OPA_STG2_TAIL_CURR_MASK,
+				    MICB_1_EN_OPA_STG2_TAIL_CURR_1_60UA);
+
+		break;
+	case SND_SOC_DAPM_POST_PMU:
+		pm8916_wcd_analog_micbias_enable(codec);
+		snd_soc_update_bits(codec, CDC_A_MICB_1_EN,
+				    MICB_1_EN_BYP_CAP_MASK, cap_mode);
+		break;
+	}
+
+	return 0;
+}
+
+static int pm8916_wcd_analog_enable_micbias_ext1(struct
+						  snd_soc_dapm_widget
+						  *w, struct snd_kcontrol
+						  *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
+	struct pm8916_wcd_analog_priv *wcd = snd_soc_codec_get_drvdata(codec);
+
+	return pm8916_wcd_analog_enable_micbias_ext(codec, event, w->reg,
+						     wcd->micbias1_cap_mode);
+}
+
+static int pm8916_wcd_analog_enable_micbias_ext2(struct
+						  snd_soc_dapm_widget
+						  *w, struct snd_kcontrol
+						  *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
+	struct pm8916_wcd_analog_priv *wcd = snd_soc_codec_get_drvdata(codec);
+
+	return pm8916_wcd_analog_enable_micbias_ext(codec, event, w->reg,
+						     wcd->micbias2_cap_mode);
+
+}
+
+static int pm8916_wcd_analog_enable_micbias_int2(struct
+						  snd_soc_dapm_widget
+						  *w, struct snd_kcontrol
+						  *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
+	struct pm8916_wcd_analog_priv *wcd = snd_soc_codec_get_drvdata(codec);
+
+	return pm8916_wcd_analog_enable_micbias_int(codec, event, w->reg,
+						     wcd->micbias2_cap_mode);
+}
+
+static int pm8916_wcd_analog_enable_micbias_int1(struct
+						  snd_soc_dapm_widget
+						  *w, struct snd_kcontrol
+						  *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
+	struct pm8916_wcd_analog_priv *wcd = snd_soc_codec_get_drvdata(codec);
+
+	return pm8916_wcd_analog_enable_micbias_int(codec, event, w->reg,
+						     wcd->micbias2_cap_mode);
+}
+
+static int pm8916_wcd_analog_enable_adc(struct snd_soc_dapm_widget *w,
+					 struct snd_kcontrol *kcontrol,
+					 int event)
+{
+	struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
+	u16 adc_reg = CDC_A_TX_1_2_TEST_CTL_2;
+	u8 init_bit_shift;
+
+	if (w->reg == CDC_A_TX_1_EN)
+		init_bit_shift = 5;
+	else
+		init_bit_shift = 4;
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		if (w->reg == CDC_A_TX_2_EN)
+			snd_soc_update_bits(codec, CDC_A_MICB_1_CTL,
+					    MICB_1_CTL_CFILT_REF_SEL_MASK,
+					    MICB_1_CTL_CFILT_REF_SEL_HPF_REF);
+		/*
+		 * Add delay of 10 ms to give sufficient time for the voltage
+		 * to shoot up and settle so that the txfe init does not
+		 * happen when the input voltage is changing too much.
+		 */
+		usleep_range(10000, 10010);
+		snd_soc_update_bits(codec, adc_reg, 1 << init_bit_shift,
+				    1 << init_bit_shift);
+		switch (w->reg) {
+		case CDC_A_TX_1_EN:
+			snd_soc_update_bits(codec, CDC_D_CDC_CONN_TX1_CTL,
+					    CONN_TX1_SERIAL_TX1_MUX,
+					    CONN_TX1_SERIAL_TX1_ADC_1);
+			break;
+		case CDC_A_TX_2_EN:
+		case CDC_A_TX_3_EN:
+			snd_soc_update_bits(codec, CDC_D_CDC_CONN_TX2_CTL,
+					    CONN_TX2_SERIAL_TX2_MUX,
+					    CONN_TX2_SERIAL_TX2_ADC_2);
+			break;
+		}
+		break;
+	case SND_SOC_DAPM_POST_PMU:
+		/*
+		 * Add delay of 12 ms before deasserting the init
+		 * to reduce the tx pop
+		 */
+		usleep_range(12000, 12010);
+		snd_soc_update_bits(codec, adc_reg, 1 << init_bit_shift, 0x00);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		switch (w->reg) {
+		case CDC_A_TX_1_EN:
+			snd_soc_update_bits(codec, CDC_D_CDC_CONN_TX1_CTL,
+					    CONN_TX1_SERIAL_TX1_MUX,
+					    CONN_TX1_SERIAL_TX1_ZERO);
+			break;
+		case CDC_A_TX_2_EN:
+			snd_soc_update_bits(codec, CDC_A_MICB_1_CTL,
+					    MICB_1_CTL_CFILT_REF_SEL_MASK, 0);
+		case CDC_A_TX_3_EN:
+			snd_soc_update_bits(codec, CDC_D_CDC_CONN_TX2_CTL,
+					    CONN_TX2_SERIAL_TX2_MUX,
+					    CONN_TX2_SERIAL_TX2_ZERO);
+			break;
+		}
+
+
+		break;
+	}
+	return 0;
+}
+
+static int pm8916_wcd_analog_enable_spk_pa(struct snd_soc_dapm_widget *w,
+					    struct snd_kcontrol *kcontrol,
+					    int event)
+{
+	struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		snd_soc_update_bits(codec, CDC_A_SPKR_PWRSTG_CTL,
+				    SPKR_PWRSTG_CTL_DAC_EN_MASK |
+				    SPKR_PWRSTG_CTL_BBM_MASK |
+				    SPKR_PWRSTG_CTL_HBRDGE_EN_MASK |
+				    SPKR_PWRSTG_CTL_CLAMP_EN_MASK,
+				    SPKR_PWRSTG_CTL_DAC_EN|
+				    SPKR_PWRSTG_CTL_BBM_EN |
+				    SPKR_PWRSTG_CTL_HBRDGE_EN |
+				    SPKR_PWRSTG_CTL_CLAMP_EN);
+
+		snd_soc_update_bits(codec, CDC_A_RX_EAR_CTL,
+				    RX_EAR_CTL_SPK_VBAT_LDO_EN_MASK,
+				    RX_EAR_CTL_SPK_VBAT_LDO_EN_ENABLE);
+		break;
+	case SND_SOC_DAPM_POST_PMU:
+		snd_soc_update_bits(codec, CDC_A_SPKR_DRV_CTL,
+				    SPKR_DRV_CTL_DEF_MASK,
+				    SPKR_DRV_CTL_DEF_VAL);
+		snd_soc_update_bits(codec, w->reg,
+				    SPKR_DRV_CLASSD_PA_EN_MASK,
+				    SPKR_DRV_CLASSD_PA_EN_ENABLE);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		snd_soc_update_bits(codec, CDC_A_SPKR_PWRSTG_CTL,
+				    SPKR_PWRSTG_CTL_DAC_EN_MASK|
+				    SPKR_PWRSTG_CTL_BBM_MASK |
+				    SPKR_PWRSTG_CTL_HBRDGE_EN_MASK |
+				    SPKR_PWRSTG_CTL_CLAMP_EN_MASK, 0);
+
+		snd_soc_update_bits(codec, CDC_A_SPKR_DAC_CTL,
+				    SPKR_DAC_CTL_DAC_RESET_MASK,
+				    SPKR_DAC_CTL_DAC_RESET_NORMAL);
+		snd_soc_update_bits(codec, CDC_A_RX_EAR_CTL,
+				    RX_EAR_CTL_SPK_VBAT_LDO_EN_MASK, 0);
+		break;
+	}
+	return 0;
+}
+
+static const struct reg_default wcd_reg_defaults_2_0[] = {
+	{CDC_A_RX_COM_OCP_CTL, 0xD1},
+	{CDC_A_RX_COM_OCP_COUNT, 0xFF},
+	{CDC_D_SEC_ACCESS, 0xA5},
+	{CDC_D_PERPH_RESET_CTL3, 0x0F},
+	{CDC_A_TX_1_2_OPAMP_BIAS, 0x4F},
+	{CDC_A_NCP_FBCTRL, 0x28},
+	{CDC_A_SPKR_DRV_CTL, 0x69},
+	{CDC_A_SPKR_DRV_DBG, 0x01},
+	{CDC_A_BOOST_EN_CTL, 0x5F},
+	{CDC_A_SLOPE_COMP_IP_ZERO, 0x88},
+	{CDC_A_SEC_ACCESS, 0xA5},
+	{CDC_A_PERPH_RESET_CTL3, 0x0F},
+	{CDC_A_CURRENT_LIMIT, 0x82},
+	{CDC_A_SPKR_DAC_CTL, 0x03},
+	{CDC_A_SPKR_OCP_CTL, 0xE1},
+	{CDC_A_MASTER_BIAS_CTL, 0x30},
+};
+
+static int pm8916_wcd_analog_probe(struct snd_soc_codec *codec)
+{
+	struct pm8916_wcd_analog_priv *priv = dev_get_drvdata(codec->dev);
+	int err, reg;
+
+	err = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
+	if (err != 0) {
+		dev_err(codec->dev, "failed to enable regulators (%d)\n", err);
+		return err;
+	}
+
+	snd_soc_codec_set_drvdata(codec, priv);
+	priv->pmic_rev = snd_soc_read(codec, CDC_D_REVISION1);
+	priv->codec_version = snd_soc_read(codec, CDC_D_PERPH_SUBTYPE);
+
+	dev_info(codec->dev, "PMIC REV: %d\t CODEC Version: %d\n",
+		 priv->pmic_rev, priv->codec_version);
+
+	snd_soc_write(codec, CDC_D_PERPH_RESET_CTL4, 0x01);
+	snd_soc_write(codec, CDC_A_PERPH_RESET_CTL4, 0x01);
+
+	for (reg = 0; reg < ARRAY_SIZE(wcd_reg_defaults_2_0); reg++)
+		snd_soc_write(codec, wcd_reg_defaults_2_0[reg].reg,
+			      wcd_reg_defaults_2_0[reg].def);
+
+	return 0;
+}
+
+static int pm8916_wcd_analog_remove(struct snd_soc_codec *codec)
+{
+	struct pm8916_wcd_analog_priv *priv = dev_get_drvdata(codec->dev);
+
+	return regulator_bulk_disable(ARRAY_SIZE(priv->supplies),
+				      priv->supplies);
+}
+
+static const struct snd_soc_dapm_route pm8916_wcd_analog_audio_map[] = {
+
+	{"PDM_RX1", NULL, "PDM Playback"},
+	{"PDM_RX2", NULL, "PDM Playback"},
+	{"PDM_RX3", NULL, "PDM Playback"},
+	{"PDM Capture", NULL, "PDM_TX"},
+
+	/* ADC Connections */
+	{"PDM_TX", NULL, "ADC2"},
+	{"PDM_TX", NULL, "ADC3"},
+	{"ADC2", NULL, "ADC2 MUX"},
+	{"ADC3", NULL, "ADC2 MUX"},
+	{"ADC2 MUX", "INP2", "ADC2_INP2"},
+	{"ADC2 MUX", "INP3", "ADC2_INP3"},
+
+	{"PDM_TX", NULL, "ADC1"},
+	{"ADC1", NULL, "AMIC1"},
+	{"ADC2_INP2", NULL, "AMIC2"},
+	{"ADC2_INP3", NULL, "AMIC3"},
+
+	/* RDAC Connections */
+	{"HPHR DAC", NULL, "RDAC2 MUX"},
+	{"RDAC2 MUX", "RX1", "PDM_RX1"},
+	{"RDAC2 MUX", "RX2", "PDM_RX2"},
+	{"HPHL DAC", NULL, "PDM_RX1"},
+	{"PDM_RX1", NULL, "RXD1_CLK"},
+	{"PDM_RX2", NULL, "RXD2_CLK"},
+	{"PDM_RX3", NULL, "RXD3_CLK"},
+
+	{"PDM_RX1", NULL, "RXD_PDM_CLK"},
+	{"PDM_RX2", NULL, "RXD_PDM_CLK"},
+	{"PDM_RX3", NULL, "RXD_PDM_CLK"},
+
+	{"ADC1", NULL, "TXD_CLK"},
+	{"ADC2", NULL, "TXD_CLK"},
+	{"ADC3", NULL, "TXD_CLK"},
+
+	{"ADC1", NULL, "TXA_CLK25"},
+	{"ADC2", NULL, "TXA_CLK25"},
+	{"ADC3", NULL, "TXA_CLK25"},
+
+	{"PDM_RX1", NULL, "A_MCLK2"},
+	{"PDM_RX2", NULL, "A_MCLK2"},
+	{"PDM_RX3", NULL, "A_MCLK2"},
+
+	{"PDM_TX", NULL, "A_MCLK2"},
+	{"A_MCLK2", NULL, "A_MCLK"},
+
+	/* Headset (RX MIX1 and RX MIX2) */
+	{"HEADPHONE", NULL, "HPHL PA"},
+	{"HEADPHONE", NULL, "HPHR PA"},
+
+	{"HPHL PA", NULL, "EAR_HPHL_CLK"},
+	{"HPHR PA", NULL, "EAR_HPHR_CLK"},
+
+	{"CP", NULL, "NCP_CLK"},
+
+	{"HPHL PA", NULL, "HPHL"},
+	{"HPHR PA", NULL, "HPHR"},
+	{"HPHL PA", NULL, "CP"},
+	{"HPHL PA", NULL, "RX_BIAS"},
+	{"HPHR PA", NULL, "CP"},
+	{"HPHR PA", NULL, "RX_BIAS"},
+	{"HPHL", "Switch", "HPHL DAC"},
+	{"HPHR", "Switch", "HPHR DAC"},
+
+	{"RX_BIAS", NULL, "DAC_REF"},
+
+	{"SPK_OUT", NULL, "SPK PA"},
+	{"SPK PA", NULL, "RX_BIAS"},
+	{"SPK PA", NULL, "SPKR_CLK"},
+	{"SPK PA", NULL, "SPK DAC"},
+	{"SPK DAC", "Switch", "PDM_RX3"},
+
+	{"MIC BIAS Internal1", NULL, "INT_LDO_H"},
+	{"MIC BIAS Internal2", NULL, "INT_LDO_H"},
+	{"MIC BIAS External1", NULL, "INT_LDO_H"},
+	{"MIC BIAS External2", NULL, "INT_LDO_H"},
+	{"MIC BIAS Internal1", NULL, "vdd-micbias"},
+	{"MIC BIAS Internal2", NULL, "vdd-micbias"},
+	{"MIC BIAS External1", NULL, "vdd-micbias"},
+	{"MIC BIAS External2", NULL, "vdd-micbias"},
+};
+
+static const struct snd_soc_dapm_widget pm8916_wcd_analog_dapm_widgets[] = {
+
+	SND_SOC_DAPM_AIF_IN("PDM_RX1", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_IN("PDM_RX2", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_IN("PDM_RX3", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_OUT("PDM_TX", NULL, 0, SND_SOC_NOPM, 0, 0),
+
+	SND_SOC_DAPM_INPUT("AMIC1"),
+	SND_SOC_DAPM_INPUT("AMIC3"),
+	SND_SOC_DAPM_INPUT("AMIC2"),
+	SND_SOC_DAPM_OUTPUT("HEADPHONE"),
+
+	/* RX stuff */
+	SND_SOC_DAPM_SUPPLY("INT_LDO_H", SND_SOC_NOPM, 1, 0, NULL, 0),
+
+	SND_SOC_DAPM_PGA("HPHL PA", CDC_A_RX_HPH_CNP_EN, 5, 0, NULL, 0),
+	SND_SOC_DAPM_MUX("HPHL", SND_SOC_NOPM, 0, 0, &hphl_mux),
+	SND_SOC_DAPM_MIXER("HPHL DAC", CDC_A_RX_HPH_L_PA_DAC_CTL, 3, 0, NULL,
+			   0),
+	SND_SOC_DAPM_PGA("HPHR PA", CDC_A_RX_HPH_CNP_EN, 4, 0, NULL, 0),
+	SND_SOC_DAPM_MUX("HPHR", SND_SOC_NOPM, 0, 0, &hphr_mux),
+	SND_SOC_DAPM_MIXER("HPHR DAC", CDC_A_RX_HPH_R_PA_DAC_CTL, 3, 0, NULL,
+			   0),
+	SND_SOC_DAPM_MIXER("SPK DAC", SND_SOC_NOPM, 0, 0,
+			   spkr_switch, ARRAY_SIZE(spkr_switch)),
+
+	/* Speaker */
+	SND_SOC_DAPM_OUTPUT("SPK_OUT"),
+	SND_SOC_DAPM_PGA_E("SPK PA", CDC_A_SPKR_DRV_CTL,
+			   6, 0, NULL, 0,
+			   pm8916_wcd_analog_enable_spk_pa,
+			   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+			   SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_REGULATOR_SUPPLY("vdd-micbias", 0, 0),
+	SND_SOC_DAPM_SUPPLY("CP", CDC_A_NCP_EN, 0, 0, NULL, 0),
+
+	SND_SOC_DAPM_SUPPLY("DAC_REF", CDC_A_RX_COM_BIAS_DAC, 0, 0, NULL, 0),
+	SND_SOC_DAPM_SUPPLY("RX_BIAS", CDC_A_RX_COM_BIAS_DAC, 7, 0, NULL, 0),
+
+	/* TX */
+	SND_SOC_DAPM_SUPPLY("MIC BIAS Internal1", CDC_A_MICB_1_EN, 7, 0,
+			    pm8916_wcd_analog_enable_micbias_int1,
+			    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+			    SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_SUPPLY("MIC BIAS Internal2", CDC_A_MICB_2_EN, 7, 0,
+			    pm8916_wcd_analog_enable_micbias_int2,
+			    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+			    SND_SOC_DAPM_POST_PMD),
+
+	SND_SOC_DAPM_SUPPLY("MIC BIAS External1", CDC_A_MICB_1_EN, 7, 0,
+			    pm8916_wcd_analog_enable_micbias_ext1,
+			    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_SUPPLY("MIC BIAS External2", CDC_A_MICB_2_EN, 7, 0,
+			    pm8916_wcd_analog_enable_micbias_ext2,
+			    SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
+
+	SND_SOC_DAPM_ADC_E("ADC1", NULL, CDC_A_TX_1_EN, 7, 0,
+			   pm8916_wcd_analog_enable_adc,
+			   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+			   SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_ADC_E("ADC2_INP2", NULL, CDC_A_TX_2_EN, 7, 0,
+			   pm8916_wcd_analog_enable_adc,
+			   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+			   SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_ADC_E("ADC2_INP3", NULL, CDC_A_TX_3_EN, 7, 0,
+			   pm8916_wcd_analog_enable_adc,
+			   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+			   SND_SOC_DAPM_POST_PMD),
+
+	SND_SOC_DAPM_MIXER("ADC2", SND_SOC_NOPM, 0, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("ADC3", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+	SND_SOC_DAPM_MUX("ADC2 MUX", SND_SOC_NOPM, 0, 0, &tx_adc2_mux),
+	SND_SOC_DAPM_MUX("RDAC2 MUX", SND_SOC_NOPM, 0, 0, &rdac2_mux),
+
+	/* Analog path clocks */
+	SND_SOC_DAPM_SUPPLY("EAR_HPHR_CLK", CDC_D_CDC_ANA_CLK_CTL, 0, 0, NULL,
+			    0),
+	SND_SOC_DAPM_SUPPLY("EAR_HPHL_CLK", CDC_D_CDC_ANA_CLK_CTL, 1, 0, NULL,
+			    0),
+	SND_SOC_DAPM_SUPPLY("SPKR_CLK", CDC_D_CDC_ANA_CLK_CTL, 4, 0, NULL, 0),
+	SND_SOC_DAPM_SUPPLY("TXA_CLK25", CDC_D_CDC_ANA_CLK_CTL, 5, 0, NULL, 0),
+
+	/* Digital path clocks */
+
+	SND_SOC_DAPM_SUPPLY("RXD1_CLK", CDC_D_CDC_DIG_CLK_CTL, 0, 0, NULL, 0),
+	SND_SOC_DAPM_SUPPLY("RXD2_CLK", CDC_D_CDC_DIG_CLK_CTL, 1, 0, NULL, 0),
+	SND_SOC_DAPM_SUPPLY("RXD3_CLK", CDC_D_CDC_DIG_CLK_CTL, 2, 0, NULL, 0),
+
+	SND_SOC_DAPM_SUPPLY("TXD_CLK", CDC_D_CDC_DIG_CLK_CTL, 4, 0, NULL, 0),
+	SND_SOC_DAPM_SUPPLY("NCP_CLK", CDC_D_CDC_DIG_CLK_CTL, 6, 0, NULL, 0),
+	SND_SOC_DAPM_SUPPLY("RXD_PDM_CLK", CDC_D_CDC_DIG_CLK_CTL, 7, 0, NULL,
+			    0),
+
+	/* System Clock source */
+	SND_SOC_DAPM_SUPPLY("A_MCLK", CDC_D_CDC_TOP_CLK_CTL, 2, 0, NULL, 0),
+	/* TX ADC and RX DAC Clock source. */
+	SND_SOC_DAPM_SUPPLY("A_MCLK2", CDC_D_CDC_TOP_CLK_CTL, 3, 0, NULL, 0),
+};
+
+static struct regmap *pm8916_get_regmap(struct device *dev)
+{
+	return dev_get_regmap(dev->parent, NULL);
+}
+
+static int pm8916_wcd_analog_startup(struct snd_pcm_substream *substream,
+				      struct snd_soc_dai *dai)
+{
+	snd_soc_update_bits(dai->codec, CDC_D_CDC_RST_CTL,
+			    RST_CTL_DIG_SW_RST_N_MASK,
+			    RST_CTL_DIG_SW_RST_N_REMOVE_RESET);
+
+	return 0;
+}
+
+static void pm8916_wcd_analog_shutdown(struct snd_pcm_substream *substream,
+					 struct snd_soc_dai *dai)
+{
+	snd_soc_update_bits(dai->codec, CDC_D_CDC_RST_CTL,
+			    RST_CTL_DIG_SW_RST_N_MASK, 0);
+}
+
+static struct snd_soc_dai_ops pm8916_wcd_analog_dai_ops = {
+	.startup = pm8916_wcd_analog_startup,
+	.shutdown = pm8916_wcd_analog_shutdown,
+};
+
+static struct snd_soc_dai_driver pm8916_wcd_analog_dai[] = {
+	[0] = {
+	       .name = "pm8916_wcd_analog_pdm_rx",
+	       .id = 0,
+	       .playback = {
+			    .stream_name = "PDM Playback",
+			    .rates = MSM8916_WCD_ANALOG_RATES,
+			    .formats = MSM8916_WCD_ANALOG_FORMATS,
+			    .channels_min = 1,
+			    .channels_max = 3,
+			    },
+	       .ops = &pm8916_wcd_analog_dai_ops,
+	       },
+	[1] = {
+	       .name = "pm8916_wcd_analog_pdm_tx",
+	       .id = 1,
+	       .capture = {
+			   .stream_name = "PDM Capture",
+			   .rates = MSM8916_WCD_ANALOG_RATES,
+			   .formats = MSM8916_WCD_ANALOG_FORMATS,
+			   .channels_min = 1,
+			   .channels_max = 4,
+			   },
+	       .ops = &pm8916_wcd_analog_dai_ops,
+	       },
+};
+
+static struct snd_soc_codec_driver pm8916_wcd_analog = {
+	.probe = pm8916_wcd_analog_probe,
+	.remove = pm8916_wcd_analog_remove,
+	.get_regmap = pm8916_get_regmap,
+	.component_driver = {
+		.controls = pm8916_wcd_analog_snd_controls,
+		.num_controls = ARRAY_SIZE(pm8916_wcd_analog_snd_controls),
+		.dapm_widgets = pm8916_wcd_analog_dapm_widgets,
+		.num_dapm_widgets = ARRAY_SIZE(pm8916_wcd_analog_dapm_widgets),
+		.dapm_routes = pm8916_wcd_analog_audio_map,
+		.num_dapm_routes = ARRAY_SIZE(pm8916_wcd_analog_audio_map),
+	},
+};
+
+static int pm8916_wcd_analog_parse_dt(struct device *dev,
+				       struct pm8916_wcd_analog_priv *priv)
+{
+	int ret, i;
+
+	if (of_property_read_bool(dev->of_node, "qcom,micbias1-ext-cap"))
+		priv->micbias1_cap_mode = MICB_1_EN_EXT_BYP_CAP;
+	else
+		priv->micbias1_cap_mode = MICB_1_EN_NO_EXT_BYP_CAP;
+
+	if (of_property_read_bool(dev->of_node, "qcom,micbias2-ext-cap"))
+		priv->micbias2_cap_mode = MICB_1_EN_EXT_BYP_CAP;
+	else
+		priv->micbias2_cap_mode = MICB_1_EN_NO_EXT_BYP_CAP;
+
+	priv->mclk = devm_clk_get(dev, "mclk");
+	if (IS_ERR(priv->mclk)) {
+		dev_err(dev, "failed to get mclk\n");
+		return PTR_ERR(priv->mclk);
+	}
+	for (i = 0; i < ARRAY_SIZE(supply_names); i++)
+		priv->supplies[i].supply = supply_names[i];
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(priv->supplies),
+				    priv->supplies);
+	if (ret) {
+		dev_err(dev, "Failed to get regulator supplies %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev)
+{
+	struct pm8916_wcd_analog_priv *priv;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	ret = pm8916_wcd_analog_parse_dt(dev, priv);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_prepare_enable(priv->mclk);
+	if (ret < 0) {
+		dev_err(dev, "failed to enable mclk %d\n", ret);
+		return ret;
+	}
+
+	dev_set_drvdata(dev, priv);
+
+	return snd_soc_register_codec(dev, &pm8916_wcd_analog,
+				      pm8916_wcd_analog_dai,
+				      ARRAY_SIZE(pm8916_wcd_analog_dai));
+}
+
+static int pm8916_wcd_analog_spmi_remove(struct platform_device *pdev)
+{
+	struct pm8916_wcd_analog_priv *priv = dev_get_drvdata(&pdev->dev);
+
+	snd_soc_unregister_codec(&pdev->dev);
+	clk_disable_unprepare(priv->mclk);
+
+	return 0;
+}
+
+static const struct of_device_id pm8916_wcd_analog_spmi_match_table[] = {
+	{ .compatible = "qcom,pm8916-wcd-analog-codec", },
+	{ }
+};
+
+static struct platform_driver pm8916_wcd_analog_spmi_driver = {
+	.driver = {
+		   .name = "qcom,pm8916-wcd-spmi-codec",
+		   .of_match_table = pm8916_wcd_analog_spmi_match_table,
+	},
+	.probe = pm8916_wcd_analog_spmi_probe,
+	.remove = pm8916_wcd_analog_spmi_remove,
+};
+
+module_platform_driver(pm8916_wcd_analog_spmi_driver);
+
+MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>");
+MODULE_DESCRIPTION("PMIC PM8916 WCD Analog Codec driver");
+MODULE_LICENSE("GPL v2");
-- 
2.9.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux