On Sunday 09 October 2016 02:00 PM, Jonathan Cameron wrote: > On 05/10/16 10:04, Mugunthan V N wrote: >> This patch adds the required pieces to ti_am335x_adc driver for >> DMA support >> >> Signed-off-by: Mugunthan V N <mugunthanvnm@xxxxxx> > Hi, > > Just the one question inline. I'll also need an Ack from Lee as > this touches code in mfd (as does the previous patch). > We have obviously missed this merge window, so no particular rush. > > Otherwise, looking very nice indeed. Got to get my BBB out and play > with this now ;) > > Jonathan >> --- >> drivers/iio/adc/ti_am335x_adc.c | 148 ++++++++++++++++++++++++++++++++++- >> include/linux/mfd/ti_am335x_tscadc.h | 7 ++ >> 2 files changed, 152 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c >> index c3cfacca..ad9dec3 100644 >> --- a/drivers/iio/adc/ti_am335x_adc.c >> +++ b/drivers/iio/adc/ti_am335x_adc.c >> @@ -30,10 +30,28 @@ >> #include <linux/iio/buffer.h> >> #include <linux/iio/kfifo_buf.h> >> >> +#include <linux/dmaengine.h> >> +#include <linux/dma-mapping.h> >> + >> +#define DMA_BUFFER_SIZE SZ_2K >> + >> +struct tiadc_dma { >> + struct dma_slave_config conf; >> + struct dma_chan *chan; >> + dma_addr_t addr; >> + dma_cookie_t cookie; >> + u8 *buf; >> + int current_period; >> + int period_size; >> + u8 fifo_thresh; >> +}; >> + >> struct tiadc_device { >> struct ti_tscadc_dev *mfd_tscadc; >> + struct tiadc_dma dma; >> struct mutex fifo1_lock; /* to protect fifo access */ >> int channels; >> + int total_ch_enabled; >> u8 channel_line[8]; >> u8 channel_step[8]; >> int buffer_en_ch_steps; >> @@ -198,6 +216,67 @@ static irqreturn_t tiadc_worker_h(int irq, void *private) >> return IRQ_HANDLED; >> } >> >> +static void tiadc_dma_rx_complete(void *param) >> +{ >> + struct iio_dev *indio_dev = param; >> + struct tiadc_device *adc_dev = iio_priv(indio_dev); >> + struct tiadc_dma *dma = &adc_dev->dma; >> + u8 *data; >> + int i; >> + >> + data = dma->buf + dma->current_period * dma->period_size; >> + dma->current_period = 1 - dma->current_period; /* swap the buffer ID */ >> + >> + for (i = 0; i < dma->period_size; i += indio_dev->scan_bytes) { >> + iio_push_to_buffers(indio_dev, data); >> + data += indio_dev->scan_bytes; >> + } > Hmm. Another case for the mooted iio_push_to_buffers_multi. Guess > we should move on with that one ;) >> +} >> + >> +static int tiadc_start_dma(struct iio_dev *indio_dev) >> +{ >> + struct tiadc_device *adc_dev = iio_priv(indio_dev); >> + struct tiadc_dma *dma = &adc_dev->dma; >> + struct dma_async_tx_descriptor *desc; >> + >> + dma->current_period = 0; /* We start to fill period 0 */ >> + /* >> + * Make the fifo thresh as the multiple of total number of >> + * channels enabled, so make sure that cyclic DMA period >> + * length is also a multiple of total number of channels >> + * enabled. This ensures that no invalid data is reported >> + * to the stack via iio_push_to_buffers(). >> + */ >> + dma->fifo_thresh = rounddown(FIFO1_THRESHOLD + 1, >> + adc_dev->total_ch_enabled) - 1; >> + /* Make sure that period length is multiple of fifo thresh level */ >> + dma->period_size = rounddown(DMA_BUFFER_SIZE / 2, >> + (dma->fifo_thresh + 1) * sizeof(u16)); >> + >> + dma->conf.src_maxburst = dma->fifo_thresh + 1; >> + dmaengine_slave_config(dma->chan, &dma->conf); >> + >> + desc = dmaengine_prep_dma_cyclic(dma->chan, dma->addr, >> + dma->period_size * 2, >> + dma->period_size, DMA_DEV_TO_MEM, >> + DMA_PREP_INTERRUPT); >> + if (!desc) >> + return -EBUSY; >> + >> + desc->callback = tiadc_dma_rx_complete; >> + desc->callback_param = indio_dev; >> + >> + dma->cookie = dmaengine_submit(desc); >> + >> + dma_async_issue_pending(dma->chan); >> + >> + tiadc_writel(adc_dev, REG_FIFO1THR, dma->fifo_thresh); >> + tiadc_writel(adc_dev, REG_DMA1REQ, dma->fifo_thresh); >> + tiadc_writel(adc_dev, REG_DMAENABLE_SET, DMA_FIFO1); >> + >> + return 0; >> +} >> + >> static int tiadc_buffer_preenable(struct iio_dev *indio_dev) >> { >> struct tiadc_device *adc_dev = iio_priv(indio_dev); >> @@ -218,20 +297,30 @@ static int tiadc_buffer_preenable(struct iio_dev *indio_dev) >> static int tiadc_buffer_postenable(struct iio_dev *indio_dev) >> { >> struct tiadc_device *adc_dev = iio_priv(indio_dev); >> + struct tiadc_dma *dma = &adc_dev->dma; >> + unsigned int irq_enable; >> unsigned int enb = 0; >> u8 bit; >> >> tiadc_step_config(indio_dev); >> - for_each_set_bit(bit, indio_dev->active_scan_mask, adc_dev->channels) >> + for_each_set_bit(bit, indio_dev->active_scan_mask, adc_dev->channels) { >> enb |= (get_adc_step_bit(adc_dev, bit) << 1); >> + adc_dev->total_ch_enabled++; >> + } >> adc_dev->buffer_en_ch_steps = enb; >> >> + if (dma->chan) >> + tiadc_start_dma(indio_dev); >> + >> am335x_tsc_se_set_cache(adc_dev->mfd_tscadc, enb); >> >> tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1THRES >> | IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW); >> - tiadc_writel(adc_dev, REG_IRQENABLE, IRQENB_FIFO1THRES >> - | IRQENB_FIFO1OVRRUN); >> + >> + irq_enable = IRQENB_FIFO1OVRRUN; >> + if (!dma->chan) >> + irq_enable |= IRQENB_FIFO1THRES; > This changes the non dma behaviour as we no longer set IRQENB_FIFO1THRES. > Why? Was it wrong before? In non DMA case, dms->chan will be NULL and IRQENB_FIFO1THRES interrupt will be enabled to pop the ADC samples. Regards Mugunthan V N >> + tiadc_writel(adc_dev, REG_IRQENABLE, irq_enable); >> >> return 0; >> } >> @@ -239,12 +328,18 @@ static int tiadc_buffer_postenable(struct iio_dev *indio_dev) >> static int tiadc_buffer_predisable(struct iio_dev *indio_dev) >> { >> struct tiadc_device *adc_dev = iio_priv(indio_dev); >> + struct tiadc_dma *dma = &adc_dev->dma; >> int fifo1count, i, read; >> >> tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES | >> IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW)); >> am335x_tsc_se_clr(adc_dev->mfd_tscadc, adc_dev->buffer_en_ch_steps); >> adc_dev->buffer_en_ch_steps = 0; >> + adc_dev->total_ch_enabled = 0; >> + if (dma->chan) { >> + tiadc_writel(adc_dev, REG_DMAENABLE_CLEAR, 0x2); >> + dmaengine_terminate_async(dma->chan); >> + } >> >> /* Flush FIFO of leftover data in the time it takes to disable adc */ >> fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT); >> @@ -430,6 +525,41 @@ static const struct iio_info tiadc_info = { >> .driver_module = THIS_MODULE, >> }; >> >> +static int tiadc_request_dma(struct platform_device *pdev, >> + struct tiadc_device *adc_dev) >> +{ >> + struct tiadc_dma *dma = &adc_dev->dma; >> + dma_cap_mask_t mask; >> + >> + /* Default slave configuration parameters */ >> + dma->conf.direction = DMA_DEV_TO_MEM; >> + dma->conf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; >> + dma->conf.src_addr = adc_dev->mfd_tscadc->tscadc_phys_base + REG_FIFO1; >> + >> + dma_cap_zero(mask); >> + dma_cap_set(DMA_CYCLIC, mask); >> + >> + /* Get a channel for RX */ >> + dma->chan = dma_request_chan(adc_dev->mfd_tscadc->dev, "fifo1"); >> + if (IS_ERR(dma->chan)) { >> + int ret = PTR_ERR(dma->chan); >> + >> + dma->chan = NULL; >> + return ret; >> + } >> + >> + /* RX buffer */ >> + dma->buf = dma_alloc_coherent(dma->chan->device->dev, DMA_BUFFER_SIZE, >> + &dma->addr, GFP_KERNEL); >> + if (!dma->buf) >> + goto err; >> + >> + return 0; >> +err: >> + dma_release_channel(dma->chan); >> + return -ENOMEM; >> +} >> + >> static int tiadc_parse_dt(struct platform_device *pdev, >> struct tiadc_device *adc_dev) >> { >> @@ -512,8 +642,14 @@ static int tiadc_probe(struct platform_device *pdev) >> >> platform_set_drvdata(pdev, indio_dev); >> >> + err = tiadc_request_dma(pdev, adc_dev); >> + if (err && err == -EPROBE_DEFER) >> + goto err_dma; >> + >> return 0; >> >> +err_dma: >> + iio_device_unregister(indio_dev); >> err_buffer_unregister: >> tiadc_iio_buffered_hardware_remove(indio_dev); >> err_free_channels: >> @@ -525,8 +661,14 @@ static int tiadc_remove(struct platform_device *pdev) >> { >> struct iio_dev *indio_dev = platform_get_drvdata(pdev); >> struct tiadc_device *adc_dev = iio_priv(indio_dev); >> + struct tiadc_dma *dma = &adc_dev->dma; >> u32 step_en; >> >> + if (dma->chan) { >> + dma_free_coherent(dma->chan->device->dev, DMA_BUFFER_SIZE, >> + dma->buf, dma->addr); >> + dma_release_channel(dma->chan); >> + } >> iio_device_unregister(indio_dev); >> tiadc_iio_buffered_hardware_remove(indio_dev); >> tiadc_channels_remove(indio_dev); >> diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h >> index e45a208..b9a53e0 100644 >> --- a/include/linux/mfd/ti_am335x_tscadc.h >> +++ b/include/linux/mfd/ti_am335x_tscadc.h >> @@ -23,6 +23,8 @@ >> #define REG_IRQENABLE 0x02C >> #define REG_IRQCLR 0x030 >> #define REG_IRQWAKEUP 0x034 >> +#define REG_DMAENABLE_SET 0x038 >> +#define REG_DMAENABLE_CLEAR 0x03c >> #define REG_CTRL 0x040 >> #define REG_ADCFSM 0x044 >> #define REG_CLKDIV 0x04C >> @@ -36,6 +38,7 @@ >> #define REG_FIFO0THR 0xE8 >> #define REG_FIFO1CNT 0xF0 >> #define REG_FIFO1THR 0xF4 >> +#define REG_DMA1REQ 0xF8 >> #define REG_FIFO0 0x100 >> #define REG_FIFO1 0x200 >> >> @@ -126,6 +129,10 @@ >> #define FIFOREAD_DATA_MASK (0xfff << 0) >> #define FIFOREAD_CHNLID_MASK (0xf << 16) >> >> +/* DMA ENABLE/CLEAR Register */ >> +#define DMA_FIFO0 BIT(0) >> +#define DMA_FIFO1 BIT(1) >> + >> /* Sequencer Status */ >> #define SEQ_STATUS BIT(5) >> #define CHARGE_STEP 0x11 >> > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html