Reviewed-by: Jonathan Richardson <jonathan.richardson@xxxxxxxxxxxx> Tested-by: Jonathan Richardson <jonathan.richardson@xxxxxxxxxxxx> Reviewed-by: Vikram Prakash <vikram.prakash@xxxxxxxxxxxx> Reviewed-by: Ray Jui <ray.jui@xxxxxxxxxxxx> Reviewed-by: Shreesha Rajashekar <shreesha.rajashekar@xxxxxxxxxxxx> Reviewed-by: Scott Branden <scott.branden@xxxxxxxxxxxx> Signed-off-by: Jonathan Richardson <jonathan.richardson@xxxxxxxxxxxx> --- .../bindings/mailbox/brcm,iproc-mailbox.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/mailbox/brcm,iproc-mailbox.txt diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-mailbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-mailbox.txt new file mode 100644 index 0000000..a40d810 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-mailbox.txt @@ -0,0 +1,20 @@ +* Broadcom's iProc Mailbox Controller + +Required properties: +- compatible: Must be "brcm,iproc-mailbox" +- reg: Defines the base address of the mailbox controller. +- interrupts: The mailbox controller's interrupt. +- #interrupt-cells: Must be 1. +- interrupt-controller: Sets device as an interrupt controller. +- #mbox-cells: Must be 1. + +Example: + + mailbox: mailbox@3024024 { + compatible = "brcm,iproc-mailbox"; + reg = <0x03024024 0x40>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-controller; + #mbox-cells = <1>; + }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html