On Mon, Oct 17, 2016 at 06:33:28PM +0200, Marek Vasut wrote: > Add DT bindings for ITE IT6251 LVDS-to-eDP bridge. > > Signed-off-by: Marek Vasut <marex@xxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > Cc: Daniel Vetter <daniel.vetter@xxxxxxxx> > Cc: Rob Herring <robh@xxxxxxxxxx> > Cc: Sean Cross <xobs@xxxxxxxxxx> > --- > .../bindings/display/bridge/ite,it6251.txt | 35 ++++++++++++++++++++++ > 1 file changed, 35 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6251.txt > > diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6251.txt b/Documentation/devicetree/bindings/display/bridge/ite,it6251.txt > new file mode 100644 > index 0000000..c5db82c > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6251.txt > @@ -0,0 +1,35 @@ > +ITE IT6251 LVDS-to-eDP bridge bindings > + > +Required properties: > +- compatible: Should be "ite,it6251" > +- reg: i2c address of the bridge, i2c address of the LVDS part > +- reg-names: Should be "bridge", "lvds" > +- power-supply: Regulator to provide the supply voltage The input pin is called "power"? > +- video interfaces: Device node can contain video interface port nodes > + for panel according to [1]. > + > +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt > + > +Example: > + > + it6251@5c { > + compatible = "ite,it6251"; > + reg = <0x5c>, <0x5e>; > + reg-names = "bridge", "lvds"; > + power-supply = <®_display>; > + > + ports { > + port@0 { > + bridge_out_edp0: endpoint { > + remote-endpoint = <&panel_in_edp0>; > + }; > + }; > + > + port@1 { > + bridge_in_lvds0: endpoint { > + remote-endpoint = <&lvds0_out>; > + }; > + }; > + }; > + }; > + > -- > 2.9.3 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html