On Wed, Oct 12, 2016 at 05:02:21PM +0100, Ramiro Oliveira wrote: > Signed-off-by: Ramiro Oliveira <roliveir@xxxxxxxxxxxx> > --- > .../devicetree/bindings/media/i2c/ov5647.txt | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5647.txt > > diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt > new file mode 100644 > index 0000000..4c91b3b > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt > @@ -0,0 +1,19 @@ > +Omnivision OV5647 raw image sensor > +--------------------------------- > + > +OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces > +and CCI (I2C compatible) control bus. > + > +Required properties: > + > +- compatible : "ovti,ov5647"; > +- reg : I2C slave address of the sensor; > + > +The common video interfaces bindings (see video-interfaces.txt) should be > +used to specify link to the image data receiver. The OV5647 device > +node should contain one 'port' child node with an 'endpoint' subnode. > + > +Following properties are valid for the endpoint node: > + > +- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in > + video-interfaces.txt. The sensor supports only two data lanes. What's the default if not present? > -- > 2.9.3 > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
