This serie aims at bringing support to mainstone board on a device-tree based build, as what is already in place for legacy mainstone. The bulk of the mainstone "specific" behavior is that a u16 write doesn't work on a address of the form 4*n + 2, while it works on 4*n. The legacy workaround was in SMC_outw(), with calls to machine_is_mainstone(). These calls don't work with a pxa27x-dt machine type, which is used when a generic device-tree pxa27x machine is used to boot the mainstone board. Therefore, this serie enables the smc91c111 adapter of the mainstone board to work on a device-tree build, exaclty as it's been working for years with the legacy arch/arm/mach-pxa/mainstone.c definition. Cheers. -- Robert Robert Jarzmik (3): net: smc91x: isolate u16 writes alignment workaround net: smc91x: take into account half-word workaround net: smsc91x: add u16 workaround for pxa platforms .../devicetree/bindings/net/smsc-lan91c111.txt | 2 + drivers/net/ethernet/smsc/smc91x.c | 8 ++- drivers/net/ethernet/smsc/smc91x.h | 78 ++++++++++++---------- 3 files changed, 52 insertions(+), 36 deletions(-) -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html