Am Donnerstag, 13. Oktober 2016, 09:22:16 CEST schrieb Peter Chen:
> On Wed, Oct 12, 2016 at 12:30:29PM +0200, Heiko Stuebner wrote:
> > Hi,
> >
> > Am Dienstag, 20. September 2016, 11:36:41 CEST schrieb Peter Chen:
> > > We have an well-known problem that the device needs to do some power
> > > sequence before it can be recognized by related host, the typical
> > > example like hard-wired mmc devices and usb devices.
> > >
> > > This power sequence is hard to be described at device tree and handled
> > > by
> > > related host driver, so we have created a common power sequence
> > > library to cover this requirement. The core code has supplied
> > > some common helpers for host driver, and individual power sequence
> > > libraries handle kinds of power sequence for devices.
> > >
> > > pwrseq_generic is intended for general purpose of power sequence, which
> > > handles gpios and clocks currently, and can cover regulator and pinctrl
> > > in future. The host driver just needs to call of_pwrseq_on/of_pwrseq_off
> > > if only one power sequence is needed, else call of_pwrseq_on_list
> > > /of_pwrseq_off_list instead (eg, USB hub driver).
> > >
> > > Signed-off-by: Peter Chen <peter.chen@xxxxxxx>
> > > Tested-by Joshua Clayton <stillcompiling@xxxxxxxxx>
> > > Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> > > Tested-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> >
> > first of all, glad to see this move forward. I've only some qualms with
> > the
> > static number of allocated power sequences below.
>
> Thanks for commenting it, the preallocate way is not a good way, but I
> can't find suitable way. See below comments.
>
> > > +static int __init pwrseq_generic_register(void)
> > > +{
> > > + struct pwrseq_generic *pwrseq_gen;
> > > + int i;
> > > +
> > > + for (i = 0; i < CONFIG_PWRSEQ_GENERIC_INSTANCE_NUMBER; i++) {
> > > + pwrseq_gen = kzalloc(sizeof(*pwrseq_gen), GFP_KERNEL);
> > > + if (!pwrseq_gen)
> > > + return -ENOMEM;
> > > +
> > > + pwrseq_gen->pwrseq.pwrseq_of_match_table = generic_id_table;
> > > + pwrseq_gen->pwrseq.get = pwrseq_generic_get;
> > > + pwrseq_gen->pwrseq.on = pwrseq_generic_on;
> > > + pwrseq_gen->pwrseq.off = pwrseq_generic_off;
> > > + pwrseq_gen->pwrseq.put = pwrseq_generic_put;
> > > + pwrseq_gen->pwrseq.free = pwrseq_generic_free;
> > > +
> > > + pwrseq_register(&pwrseq_gen->pwrseq);
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +postcore_initcall(pwrseq_generic_register)
> >
> > I see that you need to have it preallocated for the compatible matching,
> > but wouldn't it also work to either just register the type and allocate
> > dynamically or otherwise just allocate a new spare everytime
> > pwrseq_generic_get() picks up the previous spare?
>
> Before compatible matching, the host driver doesn't know which pwrseq type
> for its child node, then doesn't know which pwrseq instance needs to be
> allocated. From dts, we don't know which pwrseq type for the node.
yes, that is why I was suggesting allocating one (or two) here in
pwrseq_generic_register() and every time pwrseq_generic_get() grabs the last
free sequence instance, you allocate a new free spare one in that function.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
