On Thu, Oct 06, 2016 at 04:50:00PM +0800, Shawn Lin wrote: > From: Brian Norris <briannorris@xxxxxxxxxxxx> > > rk3399 supports PCIe 2.x link speeds marginally at best, and on some > boards, the link won't train at 5 GT/s at all. Rather than sacrifice 500 > ms waiting for training that will never happen, let's add a property > from devicetree to specify link capability. > > Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx> > Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx> > > --- > > Changes in v4: > - define link_gen as u32 > - elaborate more for rockchip,max-link-speed on doc > > Changes in v3: > - Cast a warning for invalid max link speed and use gen1 for it. > That looks better than v2. (Suggested by Brian) > > Changes in v2: > - rename the property to rockchip,max-link-speed according to > Bjorn's recommendation and take some bits from imx6q-pcie to > make this requirement more consisent. > > .../devicetree/bindings/pci/rockchip-pcie.txt | 4 ++ > drivers/pci/host/pcie-rockchip.c | 63 ++++++++++++++-------- > 2 files changed, 44 insertions(+), 23 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt > index ba67b39..9bb29de 100644 > --- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt > +++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt > @@ -42,6 +42,10 @@ Required properties: > Optional Property: > - ep-gpios: contain the entry for pre-reset gpio > - num-lanes: number of lanes to use > +- rockchip,max-link-speed: Specify PCI gen for link capability. Must > + be '2' for gen2, and '1' for gen1, otherwise will default to gen1. > + For backward compatibility, if this property isn't assigned, we > + use gen2 by default. Defaults to gen1 or gen2? Let's drop rockchip and make this a common property. > - vpcie3v3-supply: The phandle to the 3.3v regulator to use for PCIe. > - vpcie1v8-supply: The phandle to the 1.8v regulator to use for PCIe. > - vpcie0v9-supply: The phandle to the 0.9v regulator to use for PCIe. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html