On 10/07/2016 08:18 AM, Pantelis Antoniou wrote: > From: Georgi Vlaev <gvlaev@xxxxxxxxxxx> > > Add device tree bindings document for the SAM MDIO block > present in Juniper's SAM FPGA. > > Signed-off-by: Georgi Vlaev <gvlaev@xxxxxxxxxxx> > [Ported from Juniper kernel] > Signed-off-by: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/net/mdio-sam.txt | 48 ++++++++++++++++++++++ > 1 file changed, 48 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/mdio-sam.txt > > diff --git a/Documentation/devicetree/bindings/net/mdio-sam.txt b/Documentation/devicetree/bindings/net/mdio-sam.txt > new file mode 100644 > index 0000000..7d354e0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/mdio-sam.txt > @@ -0,0 +1,48 @@ > +Juniper SAM FPGA MFD MDIO bus properties. > + > +Required properties: > +- compatible : "jnx,mdio-sam" > +- reg : The start offset of the MDIO bus range > +- #address-cells = <1>; > +- #size-cells = <0>; > + > +Optional properties: > + > +Required properties for child nodes: > +- #address-cells = <1>; > +- #size-cells = <0>; > +- reg : The MDIO bus offset within the MDIO range. I would just refer to Documentation/devicetree/bindings/net/phy.txt for the child node properties. Other than that: Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx> -- Florian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
