Re: [PATCH v19 03/12] add bindings document for altera freeze bridge

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, Sep 28, 2016 at 01:21:51PM -0500, Alan Tull wrote:
> Add bindings document for the Altera Freeze Bridge.  A Freeze
> Bridge is used to gate traffic to/from a region of a FPGA
> such that that region can be reprogrammed.  The Freeze Bridge
> exist in FPGA fabric that is not currently being reconfigured.
> 
> Signed-off-by: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Matthew Gerlach <mgerlach@xxxxxxxxxxxxxxxxxxxxx>
> ---
> v19: Added in v19 of patchset, uses fpga image info struct
> ---
>  .../bindings/fpga/altera-freeze-bridge.txt         | 23 ++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
> 
> diff --git a/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
> new file mode 100644
> index 0000000..97ecc11
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
> @@ -0,0 +1,23 @@
> +Altera Freeze Bridge Controller Driver
> +
> +The Altera Freeze Bridge Controller manages one or more freeze bridges.
> +The controller can freeze/disable the bridges which prevents signal
> +changes from passing through the bridge.  The controller can also
> +unfreeze/enable the bridges which allows traffic to pass through the
> +bridge normally.
> +
> +Required properties:
> +- compatible		: Should contain "altr,freeze-bridge-controller"

Only one version of the h/w?

> +- regs			: base address and size for freeze bridge module
> +
> +Optional properties:
> +- bridge-enable		: 0 if driver should disable bridge at startup
> +			  1 if driver should enable bridge at startup
> +			  Default is to leave bridge in current state.
> +
> +Example:
> +	freeze_controller@100000450 {

Underscore...

> +		compatible = "altr,freeze-bridge-controller";
> +		regs = <0x1000 0x10>;
> +		bridge-enable = <0>;
> +	};
> -- 
> 2.9.3
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux