Re: [PATCH 7/10] mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




在 2016/10/7 23:22, Gregory CLEMENT 写道:
From: Ziji Hu <huziji@xxxxxxxxxxx>

Marvell Xenon eMMC/SD/SDIO Host Controller contains PHY.
Three types of PHYs are supported.

Add support to multiple types of PHYs init and configuration.
Add register definitions of PHYs.

Signed-off-by: Hu Ziji <huziji@xxxxxxxxxxx>
Reviewed-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
---
 MAINTAINERS                        |    1 +-
 drivers/mmc/host/Makefile          |    2 +-
 drivers/mmc/host/sdhci-xenon-phy.c | 1141 +++++++++++++++++++++++++++++-
 drivers/mmc/host/sdhci-xenon-phy.h |  157 ++++-
 drivers/mmc/host/sdhci-xenon.c     |    4 +-
 drivers/mmc/host/sdhci-xenon.h     |   17 +-
 6 files changed, 1321 insertions(+), 1 deletion(-)
 create mode 100644 drivers/mmc/host/sdhci-xenon-phy.c
 create mode 100644 drivers/mmc/host/sdhci-xenon-phy.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 859420e5dfd3..b5673c2ee5f2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7583,6 +7583,7 @@ M:	Ziji Hu <huziji@xxxxxxxxxxx>
 L:	linux-mmc@xxxxxxxxxxxxxxx
 S:	Supported
 F:	drivers/mmc/host/sdhci-xenon.*
+F:	drivers/mmc/host/sdhci-xenon-phy.*

drivers/mmc/host/sdhci-xenon* shoube enough

 F:	Documentation/devicetree/bindings/mmc/marvell,sdhci-xenon.txt

 MATROX FRAMEBUFFER DRIVER
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 75eaf743486c..4f2854556ff7 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -82,4 +82,4 @@ ifeq ($(CONFIG_CB710_DEBUG),y)
 endif

 obj-$(CONFIG_MMC_SDHCI_XENON)	+= sdhci-xenon-driver.o
-sdhci-xenon-driver-y		+= sdhci-xenon.o
+sdhci-xenon-driver-y		+= sdhci-xenon.o sdhci-xenon-phy.o
diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c
new file mode 100644
index 000000000000..4eb8fea1bec9
--- /dev/null
+++ b/drivers/mmc/host/sdhci-xenon-phy.c

Well, it's legit to use phy API and move your phy
operations to PHY subsystem. :)

@@ -0,0 +1,1141 @@
+/*
+ * PHY support for Xenon SDHC
+ *
+ * Copyright (C) 2016 Marvell, All Rights Reserved.
+ *
+ * Author:	Hu Ziji <huziji@xxxxxxxxxxx>
+ * Date:	2016-8-24
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ */
+
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/of_address.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio.h>
+
+#include "sdhci.h"
+#include "sdhci-pltfm.h"
+#include "sdhci-xenon.h"
+
+static const char * const phy_types[] = {
+	"sdh phy",
+	"emmc 5.0 phy",
+	"emmc 5.1 phy"
+};
+
+enum phy_type_enum {
+	SDH_PHY,
+	EMMC_5_0_PHY,
+	EMMC_5_1_PHY,
+	NR_PHY_TYPES
+};
+
+struct soc_pad_ctrl_table {
+	const char *soc;
+	void (*set_soc_pad)(struct sdhci_host *host,
+			    unsigned char signal_voltage);
+};
+
+struct soc_pad_ctrl {
+	/* Register address of SOC PHY PAD ctrl */
+	void __iomem	*reg;
+	/* SOC PHY PAD ctrl type */
+	enum soc_pad_ctrl_type pad_type;
+	/* SOC specific operation to set SOC PHY PAD */
+	void (*set_soc_pad)(struct sdhci_host *host,
+			    unsigned char signal_voltage);
+};
+
+static struct xenon_emmc_phy_regs  xenon_emmc_5_0_phy_regs = {
+	.timing_adj	= EMMC_5_0_PHY_TIMING_ADJUST,
+	.func_ctrl	= EMMC_5_0_PHY_FUNC_CONTROL,
+	.pad_ctrl	= EMMC_5_0_PHY_PAD_CONTROL,
+	.pad_ctrl2	= EMMC_5_0_PHY_PAD_CONTROL2,
+	.dll_ctrl	= EMMC_5_0_PHY_DLL_CONTROL,
+	.logic_timing_adj = EMMC_5_0_PHY_LOGIC_TIMING_ADJUST,
+	.delay_mask	= EMMC_5_0_PHY_FIXED_DELAY_MASK,
+	.dll_update	= DLL_UPDATE_STROBE_5_0,
+};
+
+static struct xenon_emmc_phy_regs  xenon_emmc_5_1_phy_regs = {
+	.timing_adj	= EMMC_PHY_TIMING_ADJUST,
+	.func_ctrl	= EMMC_PHY_FUNC_CONTROL,
+	.pad_ctrl	= EMMC_PHY_PAD_CONTROL,
+	.pad_ctrl2	= EMMC_PHY_PAD_CONTROL2,
+	.dll_ctrl	= EMMC_PHY_DLL_CONTROL,
+	.logic_timing_adj = EMMC_PHY_LOGIC_TIMING_ADJUST,
+	.delay_mask	= EMMC_PHY_FIXED_DELAY_MASK,
+	.dll_update	= DLL_UPDATE,
+};
+
+static int xenon_delay_adj_test(struct mmc_card *card);
+
+/*
+ * eMMC PHY configuration and operations
+ */
+struct emmc_phy_params {
+	bool	slow_mode;
+
+	u8	znr;
+	u8	zpr;
+
+	/* Nr of consecutive Sampling Points of a Valid Sampling Window */
+	u8	nr_tun_times;
+	/* Divider for calculating Tuning Step */
+	u8	tun_step_divider;
+
+	struct soc_pad_ctrl pad_ctrl;
+};
+
+static void xenon_emmc_phy_strobe_delay_adj(struct sdhci_host *host,
+					    struct mmc_card *card);
+static int xenon_emmc_phy_fix_sampl_delay_adj(struct sdhci_host *host,
+					      struct mmc_card *card);
+static void xenon_emmc_phy_set(struct sdhci_host *host,
+			       unsigned char timing);
+static void xenon_emmc_set_soc_pad(struct sdhci_host *host,
+				   unsigned char signal_voltage);
+
+static const struct xenon_phy_ops emmc_phy_ops = {
+	.strobe_delay_adj = xenon_emmc_phy_strobe_delay_adj,
+	.fix_sampl_delay_adj = xenon_emmc_phy_fix_sampl_delay_adj,
+	.phy_set = xenon_emmc_phy_set,
+	.set_soc_pad = xenon_emmc_set_soc_pad,
+};
+
+static int alloc_emmc_phy(struct sdhci_xenon_priv *priv)
+{
+	struct emmc_phy_params *params;
+
+	params = kzalloc(sizeof(*params), GFP_KERNEL);
+	if (!params)
+		return -ENOMEM;
+
+	priv->phy_params = params;
+	priv->phy_ops = &emmc_phy_ops;
+	if (priv->phy_type == EMMC_5_0_PHY)
+		priv->emmc_phy_regs = &xenon_emmc_5_0_phy_regs;
+	else
+		priv->emmc_phy_regs = &xenon_emmc_5_1_phy_regs;
+
+	return 0;
+}
+
+static int xenon_emmc_phy_init(struct sdhci_host *host)
+{
+	u32 reg;
+	u32 wait, clock;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+
+	reg = sdhci_readl(host, phy_regs->timing_adj);
+	reg |= PHY_INITIALIZAION;
+	sdhci_writel(host, reg, phy_regs->timing_adj);
+
+	/* Add duration of FC_SYNC_RST */
+	wait = ((reg >> FC_SYNC_RST_DURATION_SHIFT) &
+			FC_SYNC_RST_DURATION_MASK);
+	/* Add interval between FC_SYNC_EN and FC_SYNC_RST */
+	wait += ((reg >> FC_SYNC_RST_EN_DURATION_SHIFT) &
+			FC_SYNC_RST_EN_DURATION_MASK);
+	/* Add duration of asserting FC_SYNC_EN */
+	wait += ((reg >> FC_SYNC_EN_DURATION_SHIFT) &
+			FC_SYNC_EN_DURATION_MASK);
+	/* Add duration of waiting for PHY */
+	wait += ((reg >> WAIT_CYCLE_BEFORE_USING_SHIFT) &
+			WAIT_CYCLE_BEFORE_USING_MASK);
+	/* 4 addtional bus clock and 4 AXI bus clock are required */
+	wait += 8;
+	wait <<= 20;
+
+	clock = host->clock;
+	if (!clock)
+		/* Use the possibly slowest bus frequency value */
+		clock = LOWEST_SDCLK_FREQ;
+	/* get the wait time */
+	wait /= clock;
+	wait++;
+	/* wait for host eMMC PHY init completes */
+	udelay(wait);
+
+	reg = sdhci_readl(host, phy_regs->timing_adj);
+	reg &= PHY_INITIALIZAION;
+	if (reg) {
+		dev_err(mmc_dev(host->mmc), "eMMC PHY init cannot complete after %d us\n",
+			wait);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+#define ARMADA_3700_SOC_PAD_1_8V	0x1
+#define ARMADA_3700_SOC_PAD_3_3V	0x0
+
+static void armada_3700_soc_pad_voltage_set(struct sdhci_host *host,
+					    unsigned char signal_voltage)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct emmc_phy_params *params = priv->phy_params;
+
+	if (params->pad_ctrl.pad_type == SOC_PAD_FIXED_1_8V) {
+		writel(ARMADA_3700_SOC_PAD_1_8V, params->pad_ctrl.reg);
+	} else if (params->pad_ctrl.pad_type == SOC_PAD_SD) {
+		if (signal_voltage == MMC_SIGNAL_VOLTAGE_180)
+			writel(ARMADA_3700_SOC_PAD_1_8V, params->pad_ctrl.reg);
+		else if (signal_voltage == MMC_SIGNAL_VOLTAGE_330)
+			writel(ARMADA_3700_SOC_PAD_3_3V, params->pad_ctrl.reg);
+	}
+}
+
+static void xenon_emmc_set_soc_pad(struct sdhci_host *host,
+				   unsigned char signal_voltage)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct emmc_phy_params *params = priv->phy_params;
+
+	if (!params->pad_ctrl.reg)
+		return;
+
+	if (params->pad_ctrl.set_soc_pad)
+		params->pad_ctrl.set_soc_pad(host, signal_voltage);
+}
+
+static int emmc_phy_set_fix_sampl_delay(struct sdhci_host *host,
+					unsigned int delay,
+					bool invert,
+					bool delay_90_degree)
+{
+	u32 reg;
+	unsigned long flags;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+	int ret = 0;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	/* Setup Sampling fix delay */
+	reg = sdhci_readl(host, SDHC_SLOT_OP_STATUS_CTRL);
+	reg &= ~phy_regs->delay_mask;
+	reg |= delay & phy_regs->delay_mask;
+	sdhci_writel(host, reg, SDHC_SLOT_OP_STATUS_CTRL);
+
+	if (priv->phy_type == EMMC_5_0_PHY) {
+		/* set 90 degree phase if necessary */
+		reg &= ~DELAY_90_DEGREE_MASK_EMMC5;
+		reg |= (delay_90_degree << DELAY_90_DEGREE_SHIFT_EMMC5);
+		sdhci_writel(host, reg, SDHC_SLOT_OP_STATUS_CTRL);
+	}
+
+	/* Disable SDCLK */
+	reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+	reg &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_INT_EN);
+	sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
+
+	udelay(200);
+
+	if (priv->phy_type == EMMC_5_1_PHY) {
+		/* set 90 degree phase if necessary */
+		reg = sdhci_readl(host, EMMC_PHY_FUNC_CONTROL);
+		reg &= ~ASYNC_DDRMODE_MASK;
+		reg |= (delay_90_degree << ASYNC_DDRMODE_SHIFT);
+		sdhci_writel(host, reg, EMMC_PHY_FUNC_CONTROL);
+	}
+
+	/* Setup Inversion of Sampling edge */
+	reg = sdhci_readl(host, phy_regs->timing_adj);
+	reg &= ~SAMPL_INV_QSP_PHASE_SELECT;
+	reg |= (invert << SAMPL_INV_QSP_PHASE_SELECT_SHIFT);
+	sdhci_writel(host, reg, phy_regs->timing_adj);
+
+	/* Enable SD internal clock */
+	ret = enable_xenon_internal_clk(host);
+	if (ret)
+		goto out;
+
+	/* Enable SDCLK */
+	reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+	reg |= SDHCI_CLOCK_CARD_EN;
+	sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
+
+	udelay(200);
+
+	/*
+	 * Has to re-initialize eMMC PHY here to active PHY
+	 * because later get status cmd will be issued.
+	 */
+	ret = xenon_emmc_phy_init(host);
+
+out:
+	spin_unlock_irqrestore(&host->lock, flags);
+	return ret;
+}
+
+static int emmc_phy_do_fix_sampl_delay(struct sdhci_host *host,
+				       struct mmc_card *card,
+				       unsigned int delay,
+				       bool invert, bool quarter)
+{
+	int ret;
+
+	emmc_phy_set_fix_sampl_delay(host, delay, invert, quarter);
+
+	ret = xenon_delay_adj_test(card);
+	if (ret) {
+		dev_dbg(mmc_dev(host->mmc),
+			"fail when sampling fix delay = %d, phase = %d degree\n",
+			delay, invert * 180 + quarter * 90);
+		return -1;
+	}
+	return 0;
+}
+
+static int xenon_emmc_phy_fix_sampl_delay_adj(struct sdhci_host *host,
+					      struct mmc_card *card)
+{
+	enum sampl_fix_delay_phase phase;
+	int idx, nr_pair;
+	int ret;
+	unsigned int delay;
+	unsigned int min_delay, max_delay;
+	bool invert, quarter;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+	u32 coarse_step, fine_step;
+	const enum sampl_fix_delay_phase delay_edge[] = {
+		PHASE_0_DEGREE,
+		PHASE_180_DEGREE,
+		PHASE_90_DEGREE,
+		PHASE_270_DEGREE
+	};
+
+	coarse_step = phy_regs->delay_mask >> 1;
+	fine_step = coarse_step >> 2;
+
+	nr_pair = ARRAY_SIZE(delay_edge);
+
+	for (idx = 0; idx < nr_pair; idx++) {
+		phase = delay_edge[idx];
+		invert = (phase & 0x2) ? true : false;
+		quarter = (phase & 0x1) ? true : false;
+
+		/* increase delay value to get fix delay */
+		for (min_delay = 0;
+		     min_delay <= phy_regs->delay_mask;
+		     min_delay += coarse_step) {
+			ret = emmc_phy_do_fix_sampl_delay(host, card, min_delay,
+							  invert, quarter);
+			if (!ret)
+				break;
+		}
+
+		if (ret) {
+			dev_dbg(mmc_dev(host->mmc),
+				"Fail to set Sampling Fixed Delay with phase = %d degree\n",
+				phase * 90);
+			continue;
+		}
+
+		for (max_delay = min_delay + fine_step;
+		     max_delay < phy_regs->delay_mask;
+		     max_delay += fine_step) {
+			ret = emmc_phy_do_fix_sampl_delay(host, card, max_delay,
+							  invert, quarter);
+			if (ret) {
+				max_delay -= fine_step;
+				break;
+			}
+		}
+
+		if (!ret) {
+			ret = emmc_phy_do_fix_sampl_delay(host, card,
+							  phy_regs->delay_mask,
+							  invert, quarter);
+			if (!ret)
+				max_delay = phy_regs->delay_mask;
+		}
+
+		/*
+		 * Sampling Fixed Delay line window should be large enough,
+		 * thus the sampling point (the middle of the window)
+		 * can work when environment varies.
+		 * However, there is no clear conclusion how large the window
+		 * should be.
+		 */
+		if ((max_delay - min_delay) <=
+		    EMMC_PHY_FIXED_DELAY_WINDOW_MIN) {
+			dev_info(mmc_dev(host->mmc),
+				 "The window size %d with phase = %d degree is too small\n",
+				 max_delay - min_delay, phase * 90);
+			continue;
+		}
+
+		delay = (min_delay + max_delay) / 2;
+		emmc_phy_set_fix_sampl_delay(host, delay, invert, quarter);
+		dev_dbg(mmc_dev(host->mmc),
+			"sampling fix delay = %d with phase = %d degree\n",
+			delay, phase * 90);
+		return 0;
+	}
+
+	return -EIO;
+}
+
+static int xenon_emmc_phy_enable_dll(struct sdhci_host *host)
+{
+	u32 reg;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+	u8 timeout;
+
+	if (WARN_ON(host->clock <= MMC_HIGH_52_MAX_DTR))
+		return -EINVAL;
+
+	reg = sdhci_readl(host, phy_regs->dll_ctrl);
+	if (reg & DLL_ENABLE)
+		return 0;
+
+	/* Enable DLL */
+	reg = sdhci_readl(host, phy_regs->dll_ctrl);
+	reg |= (DLL_ENABLE | DLL_FAST_LOCK);
+
+	/*
+	 * Set Phase as 90 degree, which is most common value.
+	 * Might set another value if necessary.
+	 * The granularity is 1 degree.
+	 */
+	reg &= ~((DLL_PHASE_MASK << DLL_PHSEL0_SHIFT) |
+			(DLL_PHASE_MASK << DLL_PHSEL1_SHIFT));
+	reg |= ((DLL_PHASE_90_DEGREE << DLL_PHSEL0_SHIFT) |
+			(DLL_PHASE_90_DEGREE << DLL_PHSEL1_SHIFT));
+
+	reg &= ~DLL_BYPASS_EN;
+	reg |= phy_regs->dll_update;
+	if (priv->phy_type == EMMC_5_1_PHY)
+		reg &= ~DLL_REFCLK_SEL;
+	sdhci_writel(host, reg, phy_regs->dll_ctrl);
+
+	/* Wait max 32 ms */
+	timeout = 32;
+	while (!(sdhci_readw(host, SDHC_SLOT_EXT_PRESENT_STATE) & LOCK_STATE)) {
+		if (!timeout) {
+			dev_err(mmc_dev(host->mmc), "Wait for DLL Lock time-out\n");
+			return -ETIMEDOUT;
+		}
+		timeout--;
+		mdelay(1);
+	}
+	return 0;
+}
+
+static int __emmc_phy_config_tuning(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct emmc_phy_params *params = priv->phy_params;
+	u32 reg, tuning_step;
+	int ret;
+	unsigned long flags;
+
+	if (WARN_ON(host->clock <= MMC_HIGH_52_MAX_DTR))
+		return -EINVAL;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	ret = xenon_emmc_phy_enable_dll(host);
+	if (ret) {
+		spin_unlock_irqrestore(&host->lock, flags);
+		return ret;
+	}
+
+	reg = sdhci_readl(host, SDHC_SLOT_DLL_CUR_DLY_VAL);
+	tuning_step = reg / params->tun_step_divider;
+	if (unlikely(tuning_step > TUNING_STEP_MASK)) {
+		dev_warn(mmc_dev(host->mmc),
+			 "HS200 TUNING_STEP %d is larger than MAX value\n",
+			 tuning_step);
+		tuning_step = TUNING_STEP_MASK;
+	}
+
+	reg = sdhci_readl(host, SDHC_SLOT_OP_STATUS_CTRL);
+	reg &= ~(TUN_CONSECUTIVE_TIMES_MASK << TUN_CONSECUTIVE_TIMES_SHIFT);
+	reg |= (params->nr_tun_times << TUN_CONSECUTIVE_TIMES_SHIFT);
+	reg &= ~(TUNING_STEP_MASK << TUNING_STEP_SHIFT);
+	reg |= (tuning_step << TUNING_STEP_SHIFT);
+	sdhci_writel(host, reg, SDHC_SLOT_OP_STATUS_CTRL);
+
+	spin_unlock_irqrestore(&host->lock, flags);
+	return 0;
+}
+
+static int xenon_emmc_phy_config_tuning(struct sdhci_host *host)
+{
+	return __emmc_phy_config_tuning(host);
+}
+
+static void xenon_emmc_phy_strobe_delay_adj(struct sdhci_host *host,
+					    struct mmc_card *card)
+{
+	u32 reg;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	unsigned long flags;
+
+	if (host->clock <= MMC_HIGH_52_MAX_DTR)
+		return;
+
+	dev_dbg(mmc_dev(host->mmc), "starts HS400 strobe delay adjustment\n");
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	xenon_emmc_phy_enable_dll(host);
+
+	/* Enable SDHC Data Strobe */
+	reg = sdhci_readl(host, SDHC_SLOT_EMMC_CTRL);
+	reg |= ENABLE_DATA_STROBE;
+	sdhci_writel(host, reg, SDHC_SLOT_EMMC_CTRL);
+
+	/* Set Data Strobe Pull down */
+	if (priv->phy_type == EMMC_5_0_PHY) {
+		reg = sdhci_readl(host, EMMC_5_0_PHY_PAD_CONTROL);
+		reg |= EMMC5_FC_QSP_PD;
+		reg &= ~EMMC5_FC_QSP_PU;
+		sdhci_writel(host, reg, EMMC_5_0_PHY_PAD_CONTROL);
+	} else {
+		reg = sdhci_readl(host, EMMC_PHY_PAD_CONTROL1);
+		reg |= EMMC5_1_FC_QSP_PD;
+		reg &= ~EMMC5_1_FC_QSP_PU;
+		sdhci_writel(host, reg, EMMC_PHY_PAD_CONTROL1);
+	}
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+#define LOGIC_TIMING_VALUE	0x00AA8977
+
+static void xenon_emmc_phy_set(struct sdhci_host *host,
+			       unsigned char timing)
+{
+	u32 reg;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct emmc_phy_params *params = priv->phy_params;
+	struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+	struct mmc_card *card = priv->card_candidate;
+	unsigned long flags;
+
+	dev_dbg(mmc_dev(host->mmc), "eMMC PHY setting starts\n");
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	/* Setup pad, set bit[28] and bits[26:24] */
+	reg = sdhci_readl(host, phy_regs->pad_ctrl);
+	reg |= (FC_DQ_RECEN | FC_CMD_RECEN | FC_QSP_RECEN | OEN_QSN);
+	/*
+	 * All FC_XX_RECEIVCE should be set as CMOS Type
+	 */
+	reg |= FC_ALL_CMOS_RECEIVER;
+	sdhci_writel(host, reg, phy_regs->pad_ctrl);
+
+	/* Set CMD and DQ Pull Up */
+	if (priv->phy_type == EMMC_5_0_PHY) {
+		reg = sdhci_readl(host, EMMC_5_0_PHY_PAD_CONTROL);
+		reg |= (EMMC5_FC_CMD_PU | EMMC5_FC_DQ_PU);
+		reg &= ~(EMMC5_FC_CMD_PD | EMMC5_FC_DQ_PD);
+		sdhci_writel(host, reg, EMMC_5_0_PHY_PAD_CONTROL);
+	} else {
+		reg = sdhci_readl(host, EMMC_PHY_PAD_CONTROL1);
+		reg |= (EMMC5_1_FC_CMD_PU | EMMC5_1_FC_DQ_PU);
+		reg &= ~(EMMC5_1_FC_CMD_PD | EMMC5_1_FC_DQ_PD);
+		sdhci_writel(host, reg, EMMC_PHY_PAD_CONTROL1);
+	}
+
+	if ((timing == MMC_TIMING_LEGACY) || !card)
+		goto phy_init;
+
+	/*
+	 * FIXME: should depends on the specific board timing.
+	 */
+	if ((timing == MMC_TIMING_MMC_HS400) ||
+	    (timing == MMC_TIMING_MMC_HS200) ||
+	    (timing == MMC_TIMING_UHS_SDR50) ||
+	    (timing == MMC_TIMING_UHS_SDR104) ||
+	    (timing == MMC_TIMING_UHS_DDR50) ||
+	    (timing == MMC_TIMING_UHS_SDR25) ||
+	    (timing == MMC_TIMING_MMC_DDR52)) {
+		reg = sdhci_readl(host, phy_regs->timing_adj);
+		reg &= ~OUTPUT_QSN_PHASE_SELECT;
+		sdhci_writel(host, reg, phy_regs->timing_adj);
+	}
+
+	/*
+	 * If SDIO card, set SDIO Mode
+	 * Otherwise, clear SDIO Mode and Slow Mode
+	 */
+	if (mmc_card_sdio(card)) {
+		reg = sdhci_readl(host, phy_regs->timing_adj);
+		reg |= TIMING_ADJUST_SDIO_MODE;
+
+		if ((timing == MMC_TIMING_UHS_SDR25) ||
+		    (timing == MMC_TIMING_UHS_SDR12) ||
+		    (timing == MMC_TIMING_SD_HS) ||
+		    (timing == MMC_TIMING_LEGACY))
+			reg |= TIMING_ADJUST_SLOW_MODE;
+
+		sdhci_writel(host, reg, phy_regs->timing_adj);
+	} else {
+		reg = sdhci_readl(host, phy_regs->timing_adj);
+		reg &= ~(TIMING_ADJUST_SDIO_MODE | TIMING_ADJUST_SLOW_MODE);
+		sdhci_writel(host, reg, phy_regs->timing_adj);
+	}
+
+	if (((timing == MMC_TIMING_UHS_SDR50) ||
+	     (timing == MMC_TIMING_UHS_SDR25) ||
+	     (timing == MMC_TIMING_UHS_SDR12) ||
+	     (timing == MMC_TIMING_SD_HS) ||
+	     (timing == MMC_TIMING_MMC_HS) ||
+	     (timing == MMC_TIMING_LEGACY)) && params->slow_mode) {
+		reg = sdhci_readl(host, phy_regs->timing_adj);
+		reg |= TIMING_ADJUST_SLOW_MODE;
+		sdhci_writel(host, reg, phy_regs->timing_adj);
+	}
+
+	/*
+	 * Set preferred ZNR and ZPR value
+	 * The ZNR and ZPR value vary between different boards.
+	 * Define them both in sdhci-xenon-emmc-phy.h.
+	 */
+	reg = sdhci_readl(host, phy_regs->pad_ctrl2);
+	reg &= ~((ZNR_MASK << ZNR_SHIFT) | ZPR_MASK);
+	reg |= ((params->znr << ZNR_SHIFT) | params->zpr);
+	sdhci_writel(host, reg, phy_regs->pad_ctrl2);
+
+	/*
+	 * When setting EMMC_PHY_FUNC_CONTROL register,
+	 * SD clock should be disabled
+	 */
+	reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+	reg &= ~SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
+
+	if ((timing == MMC_TIMING_UHS_DDR50) ||
+	    (timing == MMC_TIMING_MMC_HS400) ||
+	    (timing == MMC_TIMING_MMC_DDR52)) {
+		reg = sdhci_readl(host, phy_regs->func_ctrl);
+		reg |= (DQ_DDR_MODE_MASK << DQ_DDR_MODE_SHIFT) | CMD_DDR_MODE;
+		sdhci_writel(host, reg, phy_regs->func_ctrl);
+	}
+
+	if (timing == MMC_TIMING_MMC_HS400) {
+		reg = sdhci_readl(host, phy_regs->func_ctrl);
+		reg &= ~DQ_ASYNC_MODE;
+		sdhci_writel(host, reg, phy_regs->func_ctrl);
+	}
+
+	/* Enable bus clock */
+	reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+	reg |= SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
+
+	if (timing == MMC_TIMING_MMC_HS400)
+		/* Hardware team recommend a value for HS400 */
+		sdhci_writel(host, LOGIC_TIMING_VALUE,
+			     phy_regs->logic_timing_adj);
+
+phy_init:
+	xenon_emmc_phy_init(host);
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	dev_dbg(mmc_dev(host->mmc), "eMMC PHY setting completes\n");
+}
+
+static int get_dt_pad_ctrl_data(struct sdhci_host *host,
+				struct device_node *np,
+				struct emmc_phy_params *params)
+{
+	int ret = 0;
+	const char *name;
+	struct resource iomem;
+
+	if (of_device_is_compatible(np, "marvell,armada-3700-sdhci"))
+		params->pad_ctrl.set_soc_pad = armada_3700_soc_pad_voltage_set;
+	else
+		return 0;
+
+	if (of_address_to_resource(np, 1, &iomem)) {
+		dev_err(mmc_dev(host->mmc), "Unable to find SOC PAD ctrl register address for %s\n",
+			np->name);
+		return -EINVAL;
+	}
+
+	params->pad_ctrl.reg = devm_ioremap_resource(mmc_dev(host->mmc),
+						     &iomem);
+	if (IS_ERR(params->pad_ctrl.reg)) {
+		dev_err(mmc_dev(host->mmc), "Unable to get SOC PHY PAD ctrl regiser for %s\n",
+			np->name);
+		return PTR_ERR(params->pad_ctrl.reg);
+	}
+
+	ret = of_property_read_string(np, "xenon,pad-type", &name);
+	if (ret) {
+		dev_err(mmc_dev(host->mmc), "Unable to determine SOC PHY PAD ctrl type\n");
+		return ret;
+	}
+	if (!strcmp(name, "sd")) {
+		params->pad_ctrl.pad_type = SOC_PAD_SD;
+	} else if (!strcmp(name, "fixed-1-8v")) {
+		params->pad_ctrl.pad_type = SOC_PAD_FIXED_1_8V;
+	} else {
+		dev_err(mmc_dev(host->mmc), "Unsupported SOC PHY PAD ctrl type %s\n",
+			name);
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int emmc_phy_parse_param_dt(struct sdhci_host *host,
+				   struct device_node *np,
+				   struct emmc_phy_params *params)
+{
+	u32 value;
+
+	if (of_property_read_bool(np, "xenon,phy-slow-mode"))
+		params->slow_mode = true;
+	else
+		params->slow_mode = false;
+
+	if (!of_property_read_u32(np, "xenon,phy-znr", &value))
+		params->znr = value & ZNR_MASK;
+	else
+		params->znr = ZNR_DEF_VALUE;
+
+	if (!of_property_read_u32(np, "xenon,phy-zpr", &value))
+		params->zpr = value & ZPR_MASK;
+	else
+		params->zpr = ZPR_DEF_VALUE;
+
+	if (!of_property_read_u32(np, "xenon,phy-nr-tun-times", &value))
+		params->nr_tun_times = value & TUN_CONSECUTIVE_TIMES_MASK;
+	else
+		params->nr_tun_times = TUN_CONSECUTIVE_TIMES;
+
+	if (!of_property_read_u32(np, "xenon,phy-tun-step-divider", &value))
+		params->tun_step_divider = value & 0xFF;
+	else
+		params->tun_step_divider = TUNING_STEP_DIVIDER;
+
+	return get_dt_pad_ctrl_data(host, np, params);
+}
+
+/*
+ * SDH PHY configuration and operations
+ */
+static int xenon_sdh_phy_set_fix_sampl_delay(struct sdhci_host *host,
+					     unsigned int delay, bool invert)
+{
+	u32 reg;
+	unsigned long flags;
+	int ret;
+
+	if (invert)
+		invert = 0x1;
+	else
+		invert = 0x0;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	/* Disable SDCLK */
+	reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+	reg &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_INT_EN);
+	sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
+
+	udelay(200);
+
+	/* Setup Sampling fix delay */
+	reg = sdhci_readl(host, SDHC_SLOT_OP_STATUS_CTRL);
+	reg &= ~(SDH_PHY_FIXED_DELAY_MASK |
+			(0x1 << FORCE_SEL_INVERSE_CLK_SHIFT));
+	reg |= ((delay & SDH_PHY_FIXED_DELAY_MASK) |
+			(invert << FORCE_SEL_INVERSE_CLK_SHIFT));
+	sdhci_writel(host, reg, SDHC_SLOT_OP_STATUS_CTRL);
+
+	/* Enable SD internal clock */
+	ret = enable_xenon_internal_clk(host);
+
+	/* Enable SDCLK */
+	reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+	reg |= SDHCI_CLOCK_CARD_EN;
+	sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
+
+	udelay(200);
+
+	spin_unlock_irqrestore(&host->lock, flags);
+	return ret;
+}
+
+static int sdh_phy_do_fix_sampl_delay(struct sdhci_host *host,
+				      struct mmc_card *card,
+				      unsigned int delay, bool invert)
+{
+	int ret;
+
+	xenon_sdh_phy_set_fix_sampl_delay(host, delay, invert);
+
+	ret = xenon_delay_adj_test(card);
+	if (ret) {
+		dev_dbg(mmc_dev(host->mmc),
+			"fail when sampling fix delay = %d, phase = %d degree\n",
+			delay, invert * 180);
+		return -1;
+	}
+	return 0;
+}
+
+#define SDH_PHY_COARSE_FIX_DELAY	(SDH_PHY_FIXED_DELAY_MASK / 2)
+#define SDH_PHY_FINE_FIX_DELAY		(SDH_PHY_COARSE_FIX_DELAY / 4)
+
+static int xenon_sdh_phy_fix_sampl_delay_adj(struct sdhci_host *host,
+					     struct mmc_card *card)
+{
+	u32 reg;
+	bool dll_enable = false;
+	unsigned int min_delay, max_delay, delay;
+	const bool sampl_edge[] = {
+		false,
+		true,
+	};
+	int i, nr;
+	int ret;
+
+	if (host->clock > HIGH_SPEED_MAX_DTR) {
+		/* Enable DLL when SDCLK is higher than 50MHz */
+		reg = sdhci_readl(host, SDH_PHY_SLOT_DLL_CTRL);
+		if (!(reg & SDH_PHY_ENABLE_DLL)) {
+			reg |= (SDH_PHY_ENABLE_DLL | SDH_PHY_FAST_LOCK_EN);
+			sdhci_writel(host, reg, SDH_PHY_SLOT_DLL_CTRL);
+			mdelay(1);
+
+			reg = sdhci_readl(host, SDH_PHY_SLOT_DLL_PHASE_SEL);
+			reg |= SDH_PHY_DLL_UPDATE_TUNING;
+			sdhci_writel(host, reg, SDH_PHY_SLOT_DLL_PHASE_SEL);
+		}
+		dll_enable = true;
+	}
+
+	nr = dll_enable ? ARRAY_SIZE(sampl_edge) : 1;
+	for (i = 0; i < nr; i++) {
+		for (min_delay = 0; min_delay <= SDH_PHY_FIXED_DELAY_MASK;
+				min_delay += SDH_PHY_COARSE_FIX_DELAY) {
+			ret = sdh_phy_do_fix_sampl_delay(host, card, min_delay,
+							 sampl_edge[i]);
+			if (!ret)
+				break;
+		}
+
+		if (ret) {
+			dev_dbg(mmc_dev(host->mmc),
+				"Fail to set Fixed Sampling Delay with %s edge\n",
+				sampl_edge[i] ? "negative" : "positive");
+			continue;
+		}
+
+		for (max_delay = min_delay + SDH_PHY_FINE_FIX_DELAY;
+				max_delay < SDH_PHY_FIXED_DELAY_MASK;
+				max_delay += SDH_PHY_FINE_FIX_DELAY) {
+			ret = sdh_phy_do_fix_sampl_delay(host, card, max_delay,
+							 sampl_edge[i]);
+			if (ret) {
+				max_delay -= SDH_PHY_FINE_FIX_DELAY;
+				break;
+			}
+		}
+
+		if (!ret) {
+			delay = SDH_PHY_FIXED_DELAY_MASK;
+			ret = sdh_phy_do_fix_sampl_delay(host, card, delay,
+							 sampl_edge[i]);
+			if (!ret)
+				max_delay = SDH_PHY_FIXED_DELAY_MASK;
+		}
+
+		if ((max_delay - min_delay) <= SDH_PHY_FIXED_DELAY_WINDOW_MIN) {
+			dev_info(mmc_dev(host->mmc),
+				 "The window size %d with %s edge is too small\n",
+				 max_delay - min_delay,
+				 sampl_edge[i] ? "negative" : "positive");
+			continue;
+		}
+
+		delay = (min_delay + max_delay) / 2;
+		xenon_sdh_phy_set_fix_sampl_delay(host, delay, sampl_edge[i]);
+		dev_dbg(mmc_dev(host->mmc), "sampling fix delay = %d with %s edge\n",
+			delay, sampl_edge[i] ? "negative" : "positive");
+		return 0;
+	}
+	return -EIO;
+}
+
+static const struct xenon_phy_ops sdh_phy_ops = {
+	.fix_sampl_delay_adj = xenon_sdh_phy_fix_sampl_delay_adj,
+};
+
+static int alloc_sdh_phy(struct sdhci_xenon_priv *priv)
+{
+	priv->phy_params = NULL;
+	priv->phy_ops = &sdh_phy_ops;
+	return 0;
+}
+
+/*
+ * Common functions for all PHYs
+ */
+void xenon_soc_pad_ctrl(struct sdhci_host *host,
+			unsigned char signal_voltage)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+	if (priv->phy_ops->set_soc_pad)
+		priv->phy_ops->set_soc_pad(host, signal_voltage);
+}
+
+static int __xenon_emmc_delay_adj_test(struct mmc_card *card)
+{
+	int err;
+	u8 *ext_csd = NULL;
+
+	err = mmc_get_ext_csd(card, &ext_csd);
+	kfree(ext_csd);
+
+	return err;
+}
+
+static int __xenon_sdio_delay_adj_test(struct mmc_card *card)
+{
+	struct mmc_command cmd = {0};
+	int err;
+
+	cmd.opcode = SD_IO_RW_DIRECT;
+	cmd.flags = MMC_RSP_R5 | MMC_CMD_AC;
+
+	err = mmc_wait_for_cmd(card->host, &cmd, 0);
+	if (err)
+		return err;
+
+	if (cmd.resp[0] & R5_ERROR)
+		return -EIO;
+	if (cmd.resp[0] & R5_FUNCTION_NUMBER)
+		return -EINVAL;
+	if (cmd.resp[0] & R5_OUT_OF_RANGE)
+		return -ERANGE;
+	return 0;
+}
+
+static int __xenon_sd_delay_adj_test(struct mmc_card *card)
+{
+	struct mmc_command cmd = {0};
+	int err;
+
+	cmd.opcode = MMC_SEND_STATUS;
+	cmd.arg = card->rca << 16;
+	cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+
+	err = mmc_wait_for_cmd(card->host, &cmd, 0);
+	return err;
+}
+
+static int xenon_delay_adj_test(struct mmc_card *card)
+{
+	WARN_ON(!card);
+	WARN_ON(!card->host);
+
+	if (mmc_card_mmc(card))
+		return __xenon_emmc_delay_adj_test(card);
+	else if (mmc_card_sd(card))
+		return __xenon_sd_delay_adj_test(card);
+	else if (mmc_card_sdio(card))
+		return __xenon_sdio_delay_adj_test(card);
+	else
+		return -EINVAL;
+}
+
+static void xenon_phy_set(struct sdhci_host *host, unsigned char timing)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+	if (priv->phy_ops->phy_set)
+		priv->phy_ops->phy_set(host, timing);
+}
+
+static void xenon_hs400_strobe_delay_adj(struct sdhci_host *host,
+					 struct mmc_card *card)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+	if (WARN_ON(!mmc_card_hs400(card)))
+		return;
+
+	/* Enable the DLL to automatically adjust HS400 strobe delay.
+	 */
+	if (priv->phy_ops->strobe_delay_adj)
+		priv->phy_ops->strobe_delay_adj(host, card);
+}
+
+static int xenon_fix_sampl_delay_adj(struct sdhci_host *host,
+				     struct mmc_card *card)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+	if (priv->phy_ops->fix_sampl_delay_adj)
+		return priv->phy_ops->fix_sampl_delay_adj(host, card);
+
+	return 0;
+}
+
+/*
+ * xenon_delay_adj should not be called inside IRQ context,
+ * either Hard IRQ or Softirq.
+ */
+static int xenon_hs_delay_adj(struct sdhci_host *host,
+			      struct mmc_card *card)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	int ret = 0;
+
+	if (WARN_ON(host->clock <= DEFAULT_SDCLK_FREQ))
+		return -EINVAL;
+
+	if (mmc_card_hs400(card)) {
+		xenon_hs400_strobe_delay_adj(host, card);
+		return 0;
+	}
+
+	if (((priv->phy_type == EMMC_5_1_PHY) ||
+	     (priv->phy_type == EMMC_5_0_PHY)) &&
+	     (mmc_card_hs200(card) ||
+	     (host->timing == MMC_TIMING_UHS_SDR104))) {
+		ret = xenon_emmc_phy_config_tuning(host);
+		if (!ret)
+			return 0;
+	}
+
+	ret = xenon_fix_sampl_delay_adj(host, card);
+	if (ret)
+		dev_err(mmc_dev(host->mmc), "fails sampling fixed delay adjustment\n");
+	return ret;
+}
+
+int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios)
+{
+	struct mmc_host *mmc = host->mmc;
+	struct mmc_card *card;
+	int ret = 0;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+	if (!host->clock) {
+		priv->clock = 0;
+		return 0;
+	}
+
+	/*
+	 * The timing, frequency or bus width is changed,
+	 * better to set eMMC PHY based on current setting
+	 * and adjust Xenon SDHC delay.
+	 */
+	if ((host->clock == priv->clock) &&
+	    (ios->bus_width == priv->bus_width) &&
+	    (ios->timing == priv->timing))
+		return 0;
+
+	xenon_phy_set(host, ios->timing);
+
+	/* Update the record */
+	priv->bus_width = ios->bus_width;
+	/* Temp stage from HS200 to HS400 */
+	if (((priv->timing == MMC_TIMING_MMC_HS200) &&
+	     (ios->timing == MMC_TIMING_MMC_HS)) ||
+	    ((ios->timing == MMC_TIMING_MMC_HS) &&
+	     (priv->clock > host->clock))) {
+		priv->timing = ios->timing;
+		priv->clock = host->clock;
+		return 0;
+	}
+	priv->timing = ios->timing;
+	priv->clock = host->clock;
+
+	/* Legacy mode is a special case */
+	if (ios->timing == MMC_TIMING_LEGACY)
+		return 0;
+
+	card = priv->card_candidate;
+	if (unlikely(!card)) {
+		dev_warn(mmc_dev(mmc), "card is not present\n");
+		return -EINVAL;
+	}
+
+	if (host->clock > DEFAULT_SDCLK_FREQ)
+		ret = xenon_hs_delay_adj(host, card);
+	return ret;
+}
+
+static int add_xenon_phy(struct device_node *np, struct sdhci_host *host,
+			 const char *phy_name)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	int i, ret;
+
+	for (i = 0; i < NR_PHY_TYPES; i++) {
+		if (!strcmp(phy_name, phy_types[i])) {
+			priv->phy_type = i;
+			break;
+		}
+	}
+	if (i == NR_PHY_TYPES) {
+		dev_err(mmc_dev(host->mmc),
+			"Unable to determine PHY name %s. Use default eMMC 5.1 PHY\n",
+			phy_name);
+		priv->phy_type = EMMC_5_1_PHY;
+	}
+
+	if (priv->phy_type == SDH_PHY) {
+		return alloc_sdh_phy(priv);
+	} else if ((priv->phy_type == EMMC_5_0_PHY) ||
+			(priv->phy_type == EMMC_5_1_PHY)) {
+		ret = alloc_emmc_phy(priv);
+		if (ret)
+			return ret;
+		return emmc_phy_parse_param_dt(host, np, priv->phy_params);
+	}
+
+	return -EINVAL;
+}
+
+int xenon_phy_parse_dt(struct device_node *np, struct sdhci_host *host)
+{
+	const char *phy_type = NULL;
+
+	if (!of_property_read_string(np, "xenon,phy-type", &phy_type))
+		return add_xenon_phy(np, host, phy_type);
+
+	dev_err(mmc_dev(host->mmc), "Fail to get Xenon PHY type. Use default eMMC 5.1 PHY\n");
+	return add_xenon_phy(np, host, "emmc 5.1 phy");
+}
diff --git a/drivers/mmc/host/sdhci-xenon-phy.h b/drivers/mmc/host/sdhci-xenon-phy.h
new file mode 100644
index 000000000000..4373c71d3b7b
--- /dev/null
+++ b/drivers/mmc/host/sdhci-xenon-phy.h
@@ -0,0 +1,157 @@
+/* linux/drivers/mmc/host/sdhci-xenon-phy.h
+ *
+ * Author:	Hu Ziji <huziji@xxxxxxxxxxx>
+ * Date:	2016-8-24
+ *
+ *  Copyright (C) 2016 Marvell, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#ifndef SDHCI_XENON_PHY_H_
+#define SDHCI_XENON_PHY_H_
+
+#include <linux/types.h>
+#include "sdhci.h"
+
+/* Register base for eMMC PHY 5.0 Version */
+#define EMMC_5_0_PHY_REG_BASE			0x0160
+/* Register base for eMMC PHY 5.1 Version */
+#define EMMC_PHY_REG_BASE			0x0170
+
+#define EMMC_PHY_TIMING_ADJUST			EMMC_PHY_REG_BASE
+#define EMMC_5_0_PHY_TIMING_ADJUST		EMMC_5_0_PHY_REG_BASE
+#define TIMING_ADJUST_SLOW_MODE			BIT(29)
+#define TIMING_ADJUST_SDIO_MODE			BIT(28)
+#define OUTPUT_QSN_PHASE_SELECT			BIT(17)
+#define SAMPL_INV_QSP_PHASE_SELECT		BIT(18)
+#define SAMPL_INV_QSP_PHASE_SELECT_SHIFT	18
+#define PHY_INITIALIZAION			BIT(31)
+#define WAIT_CYCLE_BEFORE_USING_MASK		0xF
+#define WAIT_CYCLE_BEFORE_USING_SHIFT		12
+#define FC_SYNC_EN_DURATION_MASK		0xF
+#define FC_SYNC_EN_DURATION_SHIFT		8
+#define FC_SYNC_RST_EN_DURATION_MASK		0xF
+#define FC_SYNC_RST_EN_DURATION_SHIFT		4
+#define FC_SYNC_RST_DURATION_MASK		0xF
+#define FC_SYNC_RST_DURATION_SHIFT		0
+
+#define EMMC_PHY_FUNC_CONTROL			(EMMC_PHY_REG_BASE + 0x4)
+#define EMMC_5_0_PHY_FUNC_CONTROL		(EMMC_5_0_PHY_REG_BASE + 0x4)
+#define ASYNC_DDRMODE_MASK			BIT(23)
+#define ASYNC_DDRMODE_SHIFT			23
+#define CMD_DDR_MODE				BIT(16)
+#define DQ_DDR_MODE_SHIFT			8
+#define DQ_DDR_MODE_MASK			0xFF
+#define DQ_ASYNC_MODE				BIT(4)
+
+#define EMMC_PHY_PAD_CONTROL			(EMMC_PHY_REG_BASE + 0x8)
+#define EMMC_5_0_PHY_PAD_CONTROL		(EMMC_5_0_PHY_REG_BASE + 0x8)
+#define REC_EN_SHIFT				24
+#define REC_EN_MASK				0xF
+#define FC_DQ_RECEN				BIT(24)
+#define FC_CMD_RECEN				BIT(25)
+#define FC_QSP_RECEN				BIT(26)
+#define FC_QSN_RECEN				BIT(27)
+#define OEN_QSN					BIT(28)
+#define AUTO_RECEN_CTRL				BIT(30)
+#define FC_ALL_CMOS_RECEIVER			0xF000
+
+#define EMMC5_FC_QSP_PD				BIT(18)
+#define EMMC5_FC_QSP_PU				BIT(22)
+#define EMMC5_FC_CMD_PD				BIT(17)
+#define EMMC5_FC_CMD_PU				BIT(21)
+#define EMMC5_FC_DQ_PD				BIT(16)
+#define EMMC5_FC_DQ_PU				BIT(20)
+
+#define EMMC_PHY_PAD_CONTROL1			(EMMC_PHY_REG_BASE + 0xC)
+#define EMMC5_1_FC_QSP_PD			BIT(9)
+#define EMMC5_1_FC_QSP_PU			BIT(25)
+#define EMMC5_1_FC_CMD_PD			BIT(8)
+#define EMMC5_1_FC_CMD_PU			BIT(24)
+#define EMMC5_1_FC_DQ_PD			0xFF
+#define EMMC5_1_FC_DQ_PU			(0xFF << 16)
+
+#define EMMC_PHY_PAD_CONTROL2			(EMMC_PHY_REG_BASE + 0x10)
+#define EMMC_5_0_PHY_PAD_CONTROL2		(EMMC_5_0_PHY_REG_BASE + 0xC)
+#define ZNR_MASK				0x1F
+#define ZNR_SHIFT				8
+#define ZPR_MASK				0x1F
+/* Perferred ZNR and ZPR value vary between different boards.
+ * The specific ZNR and ZPR value should be defined here
+ * according to board actual timing.
+ */
+#define ZNR_DEF_VALUE				0xF
+#define ZPR_DEF_VALUE				0xF
+
+#define EMMC_PHY_DLL_CONTROL			(EMMC_PHY_REG_BASE + 0x14)
+#define EMMC_5_0_PHY_DLL_CONTROL		(EMMC_5_0_PHY_REG_BASE + 0x10)
+#define DLL_ENABLE				BIT(31)
+#define DLL_UPDATE_STROBE_5_0			BIT(30)
+#define DLL_REFCLK_SEL				BIT(30)
+#define DLL_UPDATE				BIT(23)
+#define DLL_PHSEL1_SHIFT			24
+#define DLL_PHSEL0_SHIFT			16
+#define DLL_PHASE_MASK				0x3F
+#define DLL_PHASE_90_DEGREE			0x1F
+#define DLL_FAST_LOCK				BIT(5)
+#define DLL_GAIN2X				BIT(3)
+#define DLL_BYPASS_EN				BIT(0)
+
+#define EMMC_5_0_PHY_LOGIC_TIMING_ADJUST	(EMMC_5_0_PHY_REG_BASE + 0x14)
+#define EMMC_PHY_LOGIC_TIMING_ADJUST		(EMMC_PHY_REG_BASE + 0x18)
+
+enum sampl_fix_delay_phase {
+	PHASE_0_DEGREE = 0x0,
+	PHASE_90_DEGREE = 0x1,
+	PHASE_180_DEGREE = 0x2,
+	PHASE_270_DEGREE = 0x3,
+};
+
+#define SDH_PHY_SLOT_DLL_CTRL			(0x0138)
+#define SDH_PHY_ENABLE_DLL			BIT(1)
+#define SDH_PHY_FAST_LOCK_EN			BIT(5)
+
+#define SDH_PHY_SLOT_DLL_PHASE_SEL		(0x013C)
+#define SDH_PHY_DLL_UPDATE_TUNING		BIT(15)
+
+enum soc_pad_ctrl_type {
+	SOC_PAD_SD,
+	SOC_PAD_FIXED_1_8V,
+};
+
+/*
+ * List offset of PHY registers and some special register values
+ * in eMMC PHY 5.0 or eMMC PHY 5.1
+ */
+struct xenon_emmc_phy_regs {
+	/* Offset of Timing Adjust register */
+	u16 timing_adj;
+	/* Offset of Func Control register */
+	u16 func_ctrl;
+	/* Offset of Pad Control register */
+	u16 pad_ctrl;
+	/* Offset of Pad Control register */
+	u16 pad_ctrl2;
+	/* Offset of DLL Control register */
+	u16 dll_ctrl;
+	/* Offset of Logic Timing Adjust register */
+	u16 logic_timing_adj;
+	/* Max value of eMMC Fixed Sampling Delay */
+	u32 delay_mask;
+	/* DLL Update Enable bit */
+	u32 dll_update;
+};
+
+struct xenon_phy_ops {
+	void (*strobe_delay_adj)(struct sdhci_host *host,
+				 struct mmc_card *card);
+	int (*fix_sampl_delay_adj)(struct sdhci_host *host,
+				   struct mmc_card *card);
+	void (*phy_set)(struct sdhci_host *host, unsigned char timing);
+	void (*set_soc_pad)(struct sdhci_host *host,
+			    unsigned char signal_voltage);
+};
+#endif
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index 03ba183494d3..4d7d871544fc 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -224,6 +224,7 @@ static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	spin_unlock_irqrestore(&host->lock, flags);

 	sdhci_set_ios(mmc, ios);
+	xenon_phy_adj(host, ios);

 	if (host->clock > DEFAULT_SDCLK_FREQ) {
 		spin_lock_irqsave(&host->lock, flags);
@@ -309,6 +310,8 @@ static int xenon_start_signal_voltage_switch(struct mmc_host *mmc,
 	 */
 	enable_xenon_internal_clk(host);

+	xenon_soc_pad_ctrl(host, ios->signal_voltage);
+
 	if (priv->card_candidate) {
 		if (mmc_card_mmc(priv->card_candidate))
 			return xenon_emmc_signal_voltage_switch(mmc, ios);
@@ -453,6 +456,7 @@ static int xenon_probe_dt(struct platform_device *pdev)
 		sdhci_writel(host, reg, SDHC_SYS_EXT_OP_CTRL);
 	}

+	err = xenon_phy_parse_dt(np, host);
 	return err;
 }

diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
index c2370493fbe8..06e5261a563c 100644
--- a/drivers/mmc/host/sdhci-xenon.h
+++ b/drivers/mmc/host/sdhci-xenon.h
@@ -15,6 +15,7 @@
 #include <linux/mmc/card.h>
 #include <linux/of.h>
 #include "sdhci.h"
+#include "sdhci-xenon-phy.h"

 /* Register Offset of SD Host Controller SOCP self-defined register */
 #define SDHC_SYS_CFG_INFO			0x0104
@@ -76,6 +77,7 @@
 #define MMC_TIMING_FAKE				0xFF

 #define DEFAULT_SDCLK_FREQ			(400000)
+#define LOWEST_SDCLK_FREQ			(100000)

 /* Xenon specific Mode Select value */
 #define XENON_SDHCI_CTRL_HS200			0x5
@@ -97,6 +99,15 @@ struct sdhci_xenon_priv {
 	/* Slot idx */
 	u8		slot_idx;

+	int		phy_type;
+	/*
+	 * Contains board-specific PHY parameters
+	 * passed from device tree.
+	 */
+	void		*phy_params;
+	const struct xenon_phy_ops *phy_ops;
+	struct xenon_emmc_phy_regs *emmc_phy_regs;
+
 	/*
 	 * When initializing card, Xenon has to determine card type and
 	 * adjust Sampling Fixed delay.
@@ -131,4 +142,10 @@ static inline int enable_xenon_internal_clk(struct sdhci_host *host)

 	return 0;
 }
+
+int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios);
+int xenon_phy_parse_dt(struct device_node *np,
+		       struct sdhci_host *host);
+void xenon_soc_pad_ctrl(struct sdhci_host *host,
+			unsigned char signal_voltage);
 #endif



--
Best Regards
Shawn Lin

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux