From: Georgi Vlaev <gvlaev@xxxxxxxxxxx> Add device tree binging document for the ngpmb NVRAM device. Signed-off-by: Georgi Vlaev <gvlaev@xxxxxxxxxxx> [Ported from Juniper kernel] Signed-off-by: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx> --- .../devicetree/bindings/mtd/ngpmb-nvram.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/ngpmb-nvram.txt diff --git a/Documentation/devicetree/bindings/mtd/ngpmb-nvram.txt b/Documentation/devicetree/bindings/mtd/ngpmb-nvram.txt new file mode 100644 index 0000000..297ad0e --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/ngpmb-nvram.txt @@ -0,0 +1,22 @@ +Non Volatile RAM device on a Juniper NG PMB FPGA + +These devices are found in the PTX series of Juniper routers. + +Required properties: +- compatible : must be "jnx,ngpmb-nvram" + +Optional properties: +- reg : memory address for the RAM, note that this is not +required since usually the device is a subdevice of the SAM MFD +driver which fills in the register fields. + +For the rest of the properties, see mtd-physmap.txt. + +The device tree may optionally contain sub-nodes describing partitions of the +address space. See partition.txt for more detail. + +Example: + +ngpmb_nvram { + compatible = "jnx,ngpmb-nvram"; +}; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html