Hi Joshua,
couple of nits inline below:
On Thu, Oct 6, 2016 at 1:34 PM, Joshua Clayton <stillcompiling@xxxxxxxxx> wrote:
> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> index cd84934..ccad5b1 100644
> --- a/drivers/fpga/Kconfig
> +++ b/drivers/fpga/Kconfig
> @@ -13,6 +13,12 @@ config FPGA
>
> if FPGA
>
> +config FPGA_MGR_CYCLONE_SPI
> + tristate "Altera Cyclone V SPI"
> + depends on SPI
> + help
> + FPGA manager driver support for Altera Cyclone V over SPI
> +
> config FPGA_MGR_SOCFPGA
> tristate "Altera SOCFPGA FPGA Manager"
> depends on ARCH_SOCFPGA
> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> index 8d83fc6..c03f40de 100644
> --- a/drivers/fpga/Makefile
> +++ b/drivers/fpga/Makefile
> @@ -6,5 +6,6 @@
> obj-$(CONFIG_FPGA) += fpga-mgr.o
>
> # FPGA Manager Drivers
> +obj-$(CONFIG_FPGA_MGR_CYCLONE_SPI) += cyclonespi.o
> obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o
> obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
> diff --git a/drivers/fpga/cyclonespi.c b/drivers/fpga/cyclonespi.c
> new file mode 100644
> index 0000000..1ffa67c
> --- /dev/null
> +++ b/drivers/fpga/cyclonespi.c
> @@ -0,0 +1,173 @@
> +/**
> + * Copyright (c) 2015 United Western Technologies, Corporation
> + *
> + * Joshua Clayton <stillcompiling@xxxxxxxxx>
> + *
> + * Manage Altera fpga firmware that is loaded over spi.
> + * Firmware must be in binary "rbf" format.
> + * Works on Cyclone V. Should work on cyclone series.
> + * May work on other Altera fpgas.
I think at one point we decided it's gonna be 'FPGA' to be consistent.
> +
> +static const struct of_device_id of_ef_match[] = {
> + { .compatible = "altr,cyclonespi-fpga-mgr", },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, of_ef_match);
> +
> +static enum fpga_mgr_states cyclonespi_state(struct fpga_manager *mgr)
> +{
> + return mgr->state;
> +}
> +
> +static inline u32 revbit8x4(u32 n)
> +{
> + n = ((n & 0xF0F0F0F0UL) >> 4) | ((n & 0x0F0F0F0FUL) << 4);
> + n = ((n & 0xCCCCCCCCUL) >> 2) | ((n & 0x33333333UL) << 2);
> + n = ((n & 0xAAAAAAAAUL) >> 1) | ((n & 0x55555555UL) << 1);
> + return n;
> +}
During the Zynq FPGA manager reviews we decided that manipulating the bitstream
to be consumable by the driver is userland's job.
> +
> +static int cyclonespi_write_init(struct fpga_manager *mgr, u32 flags,
> + const char *buf, size_t count)
> +{
> + struct cyclonespi_conf *conf = (struct cyclonespi_conf *)mgr->priv;
> + u32 *fw32 = (u32 *)buf;
> + const u32 *fw_end = (u32 *)(buf + count);
> +
> + if (flags & FPGA_MGR_PARTIAL_RECONFIG) {
> + dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
> + return -EINVAL;
-ENOTSUPP?
> + }
> +
> + gpiod_set_value(conf->reset, 0);
> + udelay(50);
Should that value either be configurable, or a named constant?
> + msleep(1);
See above.
> + /* set buffer to lsb first */
> + while (fw32 < fw_end) {
> + *fw32 = revbit8x4(*fw32);
> + fw32++;
> + }
See above.
> +
> + return 0;
> +}
> +
> +static int cyclonespi_write(struct fpga_manager *mgr, const char *buf,
> + size_t count)
> +{
> + struct cyclonespi_conf *conf = (struct cyclonespi_conf *)mgr->priv;
> + const char *fw_data = buf;
> + const char *fw_data_end = fw_data + count;
> +
> + while (fw_data < fw_data_end) {
> + int ret;
> + int stride = fw_data_end - fw_data;
> +
> + if (stride > SZ_4K)
> + stride = SZ_4K;
> +
> + ret = spi_write(conf->spi, fw_data, stride);
> + if (ret) {
> + dev_err(&mgr->dev, "spi error in firmware write: %d\n",
> + ret);
> + return ret;
> + }
> + fw_data += stride;
> + }
> +
> + return 0;
> +}
> +
> +static int cyclonespi_write_complete(struct fpga_manager *mgr, u32 flags)
> +{
> + struct cyclonespi_conf *conf = (struct cyclonespi_conf *)mgr->priv;
> +
> + if (gpiod_get_value(conf->status) == 0) {
> + dev_err(&mgr->dev, "Error during configuration.\n");
> + return -EIO;
> + }
> +
> + return 0;
> +}
> +
> +static const struct fpga_manager_ops cyclonespi_ops = {
> + .state = cyclonespi_state,
> + .write_init = cyclonespi_write_init,
> + .write = cyclonespi_write,
> + .write_complete = cyclonespi_write_complete,
> +};
> +
> +static int cyclonespi_probe(struct spi_device *spi)
> +{
> + struct cyclonespi_conf *conf = devm_kzalloc(&spi->dev, sizeof(*conf),
> + GFP_KERNEL);
> +
> + if (!conf)
> + return -ENOMEM;
> +
> + conf->spi = spi;
> + conf->reset = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(conf->reset)) {
> + dev_err(&spi->dev, "Failed to get reset gpio: %ld\n",
> + PTR_ERR(conf->reset));
> + return PTR_ERR(conf->reset);
> + }
> +
> + conf->status = devm_gpiod_get(&spi->dev, "status", GPIOD_IN);
> + if (IS_ERR(conf->status)) {
> + dev_err(&spi->dev, "Failed to get status gpio: %ld\n",
> + PTR_ERR(conf->status));
> + return PTR_ERR(conf->status);
> + }
> +
> + return fpga_mgr_register(&spi->dev, "Altera SPI FPGA Manager",
> + &cyclonespi_ops, conf);
Nit: Altera >Cyclone< SPI FPGA Manager
Thanks ... reminds me I wanted to submit my patch for the icoboard ;-)
Moritz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
