Describe a cyclonespi devicetree entry, required features Signed-off-by: Joshua Clayton <stillcompiling@xxxxxxxxx> --- .../bindings/fpga/cyclone-spi-fpga-mgr.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/fpga/cyclone-spi-fpga-mgr.txt diff --git a/Documentation/devicetree/bindings/fpga/cyclone-spi-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/cyclone-spi-fpga-mgr.txt new file mode 100644 index 0000000..8de34db --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/cyclone-spi-fpga-mgr.txt @@ -0,0 +1,23 @@ +Altera SOCFPGA FPGA Manager + +Altera cyclone FPGAs support a method of loading the bitstream over what is +referred to as "passive serial". +The passive serial link is not technically spi, and might require extra +circuits in order to play nicely with other spi slaves on the same bus. + +See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf + +Required properties: +- compatible : should contain "altr,cyclonespi-fpga-mgr" +- reg : spi slave id of the fpga +- reset-gpio : reset pin (referred to as nCONFIG in the cyclone manual) +- status-gpio : status pin (referred to as nSTATUS in the cyclone manual) + +Example: + fpga_spi: evi-fpga-spi@0 { + compatible = "altr,cyclonespi-fpga-mgr"; + spi-max-frequency = <20000000>; + reg = <0>; + reset-gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>; + status-gpio = <&gpio4 11 GPIO_ACTIVE_HIGH>; + }; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
