Add new compatible string for reset and sys-ctrl for the Oxford Semiconductor OX820 Support. Drop the OX810SE indices since they moved in a dedicated include file. Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> --- .../devicetree/bindings/reset/oxnas,reset.txt | 39 ++-------------------- 1 file changed, 3 insertions(+), 36 deletions(-) diff --git a/Documentation/devicetree/bindings/reset/oxnas,reset.txt b/Documentation/devicetree/bindings/reset/oxnas,reset.txt index 6f06db9..df0488e 100644 --- a/Documentation/devicetree/bindings/reset/oxnas,reset.txt +++ b/Documentation/devicetree/bindings/reset/oxnas,reset.txt @@ -5,45 +5,12 @@ Please also refer to reset.txt in this directory for common reset controller binding usage. Required properties: -- compatible: Should be "oxsemi,ox810se-reset" +- compatible: Should be "oxsemi,ox810se-reset" or "oxsemi,ox820-reset" - #reset-cells: 1, see below Parent node should have the following properties : -- compatible: Should be "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" - -For OX810SE, the indices are : - - 0 : ARM - - 1 : COPRO - - 2 : Reserved - - 3 : Reserved - - 4 : USBHS - - 5 : USBHSPHY - - 6 : MAC - - 7 : PCI - - 8 : DMA - - 9 : DPE - - 10 : DDR - - 11 : SATA - - 12 : SATA_LINK - - 13 : SATA_PHY - - 14 : Reserved - - 15 : NAND - - 16 : GPIO - - 17 : UART1 - - 18 : UART2 - - 19 : MISC - - 20 : I2S - - 21 : AHB_MON - - 22 : UART3 - - 23 : UART4 - - 24 : SGDMA - - 25 : Reserved - - 26 : Reserved - - 27 : Reserved - - 28 : Reserved - - 29 : Reserved - - 30 : Reserved - - 31 : BUS +- compatible: Should be "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" or + "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd" example: -- 2.7.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html