On Tuesday 04 October 2016 02:02 PM, Peter Ujfalusi wrote: > On 10/03/16 16:03, Mugunthan V N wrote: >> +static int tiadc_request_dma(struct platform_device *pdev, >> + struct tiadc_device *adc_dev) >> +{ >> + struct tiadc_dma *dma = &adc_dev->dma; >> + dma_cap_mask_t mask; >> + >> + /* Default slave configuration parameters */ >> + dma->conf.direction = DMA_DEV_TO_MEM; >> + dma->conf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; >> + dma->conf.src_addr = adc_dev->mfd_tscadc->tscadc_phys_base + REG_FIFO1; >> + >> + dma_cap_zero(mask); >> + dma_cap_set(DMA_CYCLIC, mask); >> + >> + /* Get a channel for RX */ >> + dma->chan = dma_request_chan(adc_dev->mfd_tscadc->dev, "fifo1"); >> + if (!dma->chan) >> + return -ENODEV; > > dma_request_chan() ERR_PTR in case of failure, never NULL. You should reuse > the returned error code to support deferred probing. Will fix this in v3. > >> + >> + /* RX buffer */ >> + dma->buf = dma_alloc_coherent(dma->chan->device->dev, DMA_BUFFER_SIZE, >> + &dma->addr, GFP_KERNEL); >> + if (!dma->buf) >> + goto err; >> + >> + return 0; >> +err: >> + dma_release_channel(dma->chan); >> + >> + return -ENOMEM; >> +} >> + >> static int tiadc_parse_dt(struct platform_device *pdev, >> struct tiadc_device *adc_dev) >> { >> @@ -512,8 +639,14 @@ static int tiadc_probe(struct platform_device *pdev) >> >> platform_set_drvdata(pdev, indio_dev); >> >> + err = tiadc_request_dma(pdev, adc_dev); >> + if (err && err != -ENODEV) >> + goto err_dma; > > You should handle the deferred probing for DMA channel. + dma->chan = dma_request_chan(adc_dev->mfd_tscadc->dev, "fifo1"); + if (IS_ERR(dma->chan)) { + int ret = PTR_ERR(dma->chan); + + dma->chan = NULL; + return ret; + } With this probe defer will be taken care and ADC will continue without DMA when request channel returns -ENODEV. Regards Mugunthan V N > >> + >> return 0; >> >> +err_dma: >> + iio_device_unregister(indio_dev); >> err_buffer_unregister: >> tiadc_iio_buffered_hardware_remove(indio_dev); >> err_free_channels: >> @@ -525,8 +658,14 @@ static int tiadc_remove(struct platform_device *pdev) >> { >> struct iio_dev *indio_dev = platform_get_drvdata(pdev); >> struct tiadc_device *adc_dev = iio_priv(indio_dev); >> + struct tiadc_dma *dma = &adc_dev->dma; >> u32 step_en; >> >> + if (dma->chan) { >> + dma_free_coherent(dma->chan->device->dev, DMA_BUFFER_SIZE, >> + dma->buf, dma->addr); >> + dma_release_channel(dma->chan); >> + } >> iio_device_unregister(indio_dev); >> tiadc_iio_buffered_hardware_remove(indio_dev); >> tiadc_channels_remove(indio_dev); >> diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h >> index e45a208..b9a53e0 100644 >> --- a/include/linux/mfd/ti_am335x_tscadc.h >> +++ b/include/linux/mfd/ti_am335x_tscadc.h >> @@ -23,6 +23,8 @@ >> #define REG_IRQENABLE 0x02C >> #define REG_IRQCLR 0x030 >> #define REG_IRQWAKEUP 0x034 >> +#define REG_DMAENABLE_SET 0x038 >> +#define REG_DMAENABLE_CLEAR 0x03c >> #define REG_CTRL 0x040 >> #define REG_ADCFSM 0x044 >> #define REG_CLKDIV 0x04C >> @@ -36,6 +38,7 @@ >> #define REG_FIFO0THR 0xE8 >> #define REG_FIFO1CNT 0xF0 >> #define REG_FIFO1THR 0xF4 >> +#define REG_DMA1REQ 0xF8 >> #define REG_FIFO0 0x100 >> #define REG_FIFO1 0x200 >> >> @@ -126,6 +129,10 @@ >> #define FIFOREAD_DATA_MASK (0xfff << 0) >> #define FIFOREAD_CHNLID_MASK (0xf << 16) >> >> +/* DMA ENABLE/CLEAR Register */ >> +#define DMA_FIFO0 BIT(0) >> +#define DMA_FIFO1 BIT(1) >> + >> /* Sequencer Status */ >> #define SEQ_STATUS BIT(5) >> #define CHARGE_STEP 0x11 >> > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html