On Mon, Oct 3, 2016 at 11:58 PM, Peter Rosin <peda@xxxxxxxxxx> wrote: > On 2016-10-03 20:46, Rob Herring wrote: >> On Tue, Sep 27, 2016 at 12:27:11AM +0200, Peter Rosin wrote: >>> The Sharp 15" LQ150X1LG11 panel is an XGA TFT LCD panel. >>> >>> Signed-off-by: Peter Rosin <peda@xxxxxxxxxx> >>> --- >>> .../bindings/display/panel/sharp,lq150x1lg11.txt | 36 ++++++++++++++++++++++ >>> 1 file changed, 36 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt >>> >>> diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt >>> new file mode 100644 >>> index 000000000000..715ff7e332f2 >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt >>> @@ -0,0 +1,36 @@ >>> +Sharp 15" LQ150X1LG11 XGA TFT LCD panel >>> + >>> +Required properties: >>> +- compatible: should be "sharp,lq150x1lg11" >>> +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) >> >> Should be named according to the input, so vcc-supply. > > Right, I wanted to do that, but the simple-panel bindings has power-supply > as required and I desperately wanted to be compatible in order to make use > of the simple-panel driver. That driver does require this entry, so I do > not see any way around it. Any advice for this situation? Okay, it's fine given it's a single supply. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
