Re: [PATCH v5 net-next] net: phy: Add Edge-rate driver for Microsemi PHYs.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Andrew,

Thank you for comments. I will fix and send the patch.

Thanks,
Raju.

On Tue, Oct 04, 2016 at 08:54:01AM +0200, Andrew Lunn wrote:
> EXTERNAL EMAIL
> 
> 
> On Tue, Oct 04, 2016 at 12:48:59AM -0400, David Miller wrote:
> > From: Raju Lakkaraju <Raju.Lakkaraju@xxxxxxxxxxxxx>
> > Date: Mon, 3 Oct 2016 12:53:13 +0530
> >
> > > From: Raju Lakkaraju <Raju.Lakkaraju@xxxxxxxxxxxxx>
> > >
> > > Edge-rate:
> > > As system and networking speeds increase, a signal's output transition,
> > > also know as the edge rate or slew rate (V/ns), takes on greater importance
> > > because high-speed signals come with a price. That price is an assortment of
> > > interference problems like ringing on the line, signal overshoot and
> > > undershoot, extended signal settling times, crosstalk noise, transmission
> > > line reflections, false signal detection by the receiving device and
> > > electromagnetic interference (EMI) -- all of which can negate the potential
> > > gains designers are seeking when they try to increase system speeds through
> > > the use of higher performance logic devices. The fact is, faster signaling
> > > edge rates can cause a higher level of electrical noise or other type of
> > > interference that can actually lead to slower line speeds and lower maximum
> > > system frequencies. This parameter allow the board designers to change the
> > > driving strange, and thereby change the EMI behavioral.
> > >
> > > Edge-rate parameters (vddmac, edge-slowdown) get from Device Tree.
> > >
> > > Tested on Beaglebone Black with VSC 8531 PHY.
> > >
> > > Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@xxxxxxxxxxxxx>
> >
> > Applied, thanks.
> 
> Oh dear. It was not ready for acceptance yet. I guess you missed all
> the discussion because it was attached to the previous version of the
> patch.
> 
> Raju you now need to submit fixup patches relative to the version
> David has accepted, to fix the issues we were discussing.
> 

Accepted.

>       Andrew
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux