When the USB PHY driver was introduced the reset framework did not have support for triggering a reset pulse for shared resets. On GXBB however there is only one reset line for both PHYs (meaning we have a shared reset line). With the latest changes to the reset framework and the corresponding updates to the phy-meson8b-usb2 driver we can now pass the reset to the second PHY as well. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> --- arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index cfa3902..2e89ec4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -165,6 +165,7 @@ compatible = "amlogic,meson-gxbb-usb2-phy"; #phy-cells = <0>; reg = <0x0 0xc0000020 0x0 0x20>; + resets = <&reset RESET_USB_OTG>; clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>; clock-names = "usb_general", "usb"; status = "disabled"; -- 2.10.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html