Luxul XWR-3100 is a wireless router based on BCM47094 SoC with two
4366c0 FullMAC PCIe cards on the PCB. It uses NAND with BCH-4 ECC
algorithm.
Signed-off-by: Dan Haab <dhaab@xxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 111 +++++++++++++++++++++++++
arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi | 13 +++
3 files changed, 125 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
create mode 100644 arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b7fbc1b..e46e2d85 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -88,6 +88,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-netgear-r7000.dtb \
bcm4709-netgear-r8000.dtb \
bcm47094-dlink-dir-885l.dtb \
+ bcm47094-luxul-xwr-3100.dtb \
bcm47094-netgear-r8500.dtb \
bcm94708.dtb \
bcm94709.dtb \
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
new file mode 100644
index 0000000..169b35f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2016 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+ compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul XWR-3100 V1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "bcm53xx:green:power";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ lan3 {
+ label = "bcm53xx:green:lan1";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ lan4 {
+ label = "bcm53xx:green:lan0";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ wan {
+ label = "bcm53xx:green:wan";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ lan1 {
+ label = "bcm53xx:green:lan3";
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ lan2 {
+ label = "bcm53xx:green:lan2";
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb3 {
+ label = "bcm53xx:green:usb3";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ 2ghz {
+ label = "bcm53xx:green:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ 5ghz {
+ label = "bcm53xx:green:5ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
new file mode 100644
index 0000000..b4e875d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2016 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+#include "bcm5301x-nand-cs0.dtsi"
+
+&nandcs {
+ nand-ecc-algo = "bch";
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
