Re: [PATCH v5 3/6] Documentation: Add sbs-manager device tree node documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, Sep 21, 2016 at 04:41:11PM +0800, Phil Reid wrote:
> From: Karl-Heinz Schneider <karl-heinz@xxxxxxxxxxxxxxxxx>
> 
> This patch adds device tree documentation for the sbs-manager
> 
> Reviewed-by: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
> Signed-off-by: Karl-Heinz Schneider <karl-heinz@xxxxxxxxxxxxxxxxx>
> Signed-off-by: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
> ---
>  .../bindings/power/supply/sbs,sbs-manager.txt      | 62 ++++++++++++++++++++++
>  1 file changed, 62 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt
> 
> diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt
> new file mode 100644
> index 0000000..2a04b30
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt
> @@ -0,0 +1,62 @@
> +Binding for sbs-manager
> +
> +Required properties:
> +- compatible: should be "lltc,ltc1760" or use "sbs,sbs-manager" as fallback.
> +- reg: integer, i2c address of the device. Should be <0xa>.
> +Optional properties:
> +- gpio-controller: Marks the port as GPIO controller.
> +  See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
> +- #gpio-cells: Should be <2>. The first cell is the pin number, the second cell
> +  is used to specify optional parameters:
> +  See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.

Is this leftover from the last version? It doesn't look like you are 
using any GPIOs in the example.

> +
> +From OS view the device is basically an i2c-mux used to communicate with up to
> +four smart battery devices at address 0xb. The driver actually implements this
> +behaviour. So standard i2c-mux nodes can be used to register up to four slave
> +batteries. See Documentation/devicetree/bindings/i2c/i2c-mux.txt for more
> +information on i2c-mux nodes. Channels will be numerated starting from 1 to 4.
> +
> +Example:
> +
> +batman@0a {
> +    compatible = "lltc,ltc1760";
> +    reg = <0x0a>;
> +    #address-cells = <1>;
> +    #size-cells = <0>;
> +
> +    gpio-controller;
> +    #gpio-cells = <2>;
> +
> +    i2c@1 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        reg = <1>;
> +
> +        battery@b {
> +            compatible = "ti,bq2060", "sbs,sbs-battery";
> +            reg = <0xb>;
> +        };
> +    };
> +
> +    i2c@2 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        reg = <2>;
> +
> +        battery@b {
> +            compatible = "ti,bq2060", "sbs,sbs-battery";
> +            reg = <0xb>;
> +        };
> +    };
> +
> +    i2c@3 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        reg = <3>;
> +
> +        battery@b {
> +            compatible = "ti,bq2060", "sbs,sbs-battery";
> +            reg = <0xb>;
> +        };
> +    };
> +};
> -- 
> 1.8.3.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux