These patches are related to Qualcomm IPQ4019 GCC (Global Clock Controller) driver code mainly adding the nodes for clock marked as fixed in current IPQ4019 clock driver and support for multiple CPU frequencies. [V3] 1. Addressed the review comments given in v2 patches. 2. Replaced the do_div with normal division. 3. Marked the PCNOC node as critical. 4. Modified the frequency values for the recent change done in IPQ4019 bootloader. 5. Changed the i2c node frequency table for 19.05 MHz clock. [V2] 1. Removed the fixed clock references and add the same as clock nodes with recalc_rate operation. 2. Added all the supported cpu frequencies in frequency table. Abhishek Sahu (7): clk: qcom: ipq4019: Added the clock nodes and operations for pll clk: qcom: ipq4019: Added the apss cpu pll divider clock node clk: qcom: ipq4019: Added the nodes for pcnoc clk: qcom: ipq4019: Added all the frequencies for apps cpu clk: qcom: ipq4019: corrected sdcc frequency and parent name clk: qcom: ipq4019: changed the frequency value for ddr pll clk: qcom: ipq4019: changed i2c freq table drivers/clk/qcom/gcc-ipq4019.c | 489 +++++++++++++++++++++++++-- include/dt-bindings/clock/qcom,gcc-ipq4019.h | 11 + 2 files changed, 477 insertions(+), 23 deletions(-) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html