On 09/20/2016 02:01 AM, Cédric Le Goater wrote:
Hello,
This serie adds support for the iBT interface on Aspeed SOCs (AST2400
and AST2500). The BT (Block Transfer) interface is used to perform
in-band IPMI communication between a host and its BMC. This driver
implements the BMC side.
This looks good. I pulled these into my tree, it's ok for 4.9 or
whatever is next, since it's a new driver.
Do patches 2 and 3 go through Joel?
-corey
Changes since v2:
- limit to one opener
- protect write/read operations with a mutex.
Changes since v1:
- the driver is now called 'bt-bmc' and the device node '/dev/ipmi-bt-host'
- the code is now under drivers/char/ipmi/. This required a change of
the top Makefile in drivers/ to compile the bt-bmc driver with the
ipmi handlers not being selected. That might be an issue.
- changed the read/write operations to use a temporary buffer and get
rid of the {get,put}_user calls
Thanks,
C.
Alistair Popple (1):
ipmi: add an Aspeed BT IPMI BMC driver
Cédric Le Goater (2):
ARM: aspeed: Add defconfigs for CONFIG_ASPEED_BT_IPMI_BMC
ARM: dts: aspeed: Enable BT IPMI BMC device
.../bindings/char/ipmi/aspeed,ast2400-bt-bmc.txt | 23 +
arch/arm/boot/dts/aspeed-g4.dtsi | 6 +
arch/arm/boot/dts/aspeed-g5.dtsi | 6 +
arch/arm/configs/aspeed_g4_defconfig | 1 +
arch/arm/configs/aspeed_g5_defconfig | 1 +
drivers/Makefile | 2 +-
drivers/char/ipmi/Kconfig | 7 +
drivers/char/ipmi/Makefile | 1 +
drivers/char/ipmi/bt-bmc.c | 510 +++++++++++++++++++++
include/uapi/linux/Kbuild | 1 +
include/uapi/linux/bt-bmc.h | 18 +
11 files changed, 575 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/char/ipmi/aspeed,ast2400-bt-bmc.txt
create mode 100644 drivers/char/ipmi/bt-bmc.c
create mode 100644 include/uapi/linux/bt-bmc.h
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
