Re: [PATCH v7 2/3] ARM: dts: add TOPEET itop elite based board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Sun, Sep 18, 2016 at 10:01:18PM +0800, Randy Li wrote:
> The TOPEET itop exynos 4412 have three versions base board. The
> Elite version is the cheap one without too much peripheral devices
> on it.
> 
> Currently supported are serial console, wired networking(USB),
> USB OTG in peripheral mode, USB host, SD storage, GPIO buttons,
> PWM beeper, ADC and LEDs. The WM8960 analog audio codec is also
> enabled.
> 
> The FIMC is not used for camera currently, I enabled it just for a
> colorspace convertor.
> 
> Signed-off-by: Randy Li <ayaka@xxxxxxxxxxx>
> ---
>  .../bindings/arm/samsung/samsung-boards.txt        |   3 +
>  arch/arm/boot/dts/Makefile                         |   1 +
>  arch/arm/boot/dts/exynos4412-itop-elite.dts        | 240 +++++++++++++++++++++
>  3 files changed, 244 insertions(+)
>  create mode 100644 arch/arm/boot/dts/exynos4412-itop-elite.dts

Looks good to me, for the record:

Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>

You don't need to resend the third patch. Rob took it.

Best regards,
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux