Am Samstag, 17. September 2016, 11:09:15 CEST schrieb Ulf Hansson:
> On 17 September 2016 at 11:01, Heiko Stuebner <heiko@xxxxxxxxx> wrote:
> > Hi,
> >
> > Am Samstag, 17. September 2016, 10:32:49 CEST schrieb Ziyuan Xu:
> >> Add power domain as a optional property for sdhci-of-arasan, which can
> >> be turned off in the so-called unused condition, such as suspend and
> >> remove. Aim to lower power requirements.
> >>
> >> Signed-off-by: Ziyuan Xu <xzy.xu@xxxxxxxxxxxxxx>
> >>
> >> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> >
> > Reviewed-by: Heiko Stuebner <heiko@xxxxxxxxx>
> >
> > @Ulf: I guess you'll take this binding change through the mmc tree and
> > I'll
> > pick up the devicetree change.
>
> Ideally the documentation and DT change should go together, so I think
> it's better for you to pick up both.
I was more thinking about future conflicts with possible other changes during
the 4.9 cycle. We have -rc7 now, so arm-soc is pretty off limits for new
changes thus the binding change would only land in time for 4.10 and may cause
conflicts then.
> I intend to ack it, although it would be nice with some more
> information as I requested, in the change-log first.
I guess we'll just wait until you are comfortable with the change and decide
then through which trees it should go :-)
Heiko
> >> ---
> >>
> >> Changes in v3:
> >> - fix a typo
> >> - add Rob's ack-tag
> >>
> >> Changes in v2:
> >> - fix a typo
> >> - add an example code for power-domain
> >>
> >> Documentation/devicetree/bindings/mmc/arasan,sdhci.txt | 7 ++++++-
> >> 1 file changed, 6 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> >> b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt index
> >> 3404afa..eb84d29 100644
> >> --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> >> +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> >> @@ -1,12 +1,14 @@
> >>
> >> Device Tree Bindings for the Arasan SDHCI Controller
> >>
> >> - The bindings follow the mmc[1], clock[2], interrupt[3] and phy[4]
> >> bindings. + The bindings follow the mmc[1], clock[2], interrupt[3],
> >> phy[4]
> >> and power + domain[5] bindings.
> >>
> >> Only deviations are documented here.
> >>
> >> [1] Documentation/devicetree/bindings/mmc/mmc.txt
> >> [2] Documentation/devicetree/bindings/clock/clock-bindings.txt
> >> [3]
> >> Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> >>
> >> [4] Documentation/devicetree/bindings/phy/phy-bindings.txt
> >> + [5] Documentation/devicetree/bindings/power/power_domain.txt
> >>
> >> Required Properties:
> >> - compatible: Compatibility string. One of:
> >> @@ -36,6 +38,8 @@ Optional Properties:
> >> - #clock-cells: If specified this should be the value <0>. With this
> >>
> >> property in place we will export a clock representing the Card Clock.
> >> This
> >> clock is expected to be consumed by our PHY. You must also specify + -
> >> power-domains: A phandle and PM domain as specifier defined by bindings +
> >>
> >> of the power controller specified by phandle.
> >>
> >> Example:
> >> sdhci@e0100000 {
> >>
> >> @@ -71,5 +75,6 @@ Example:
> >> phys = <&emmc_phy>;
> >> phy-names = "phy_arasan";
> >> #clock-cells = <0>;
> >>
> >> + power-domains = <&power RK3399_PD_EMMC>;
> >>
> >> status = "disabled";
> >>
> >> };
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
